Assessment of Design Guidelines of Concrete Columns Reinforced with Glass Fiber-Reinforced Polymer Bars
Source abstract
Abstract
First Name is required invalid characters Last Name is required invalid characters Email Address is required Invalid Email Address Invalid Email Address
Only a short abstract or summary was supplied by the source.
Source: openalex_inverted_index · Quality: short
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. ACI Committee 318, 2014, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 520 pp.
2. ACI Committee 440, 2015, “Guide for the Design and Construction of Concrete Reinforced with Fiber-Reinforced Polymer Bars (ACI 440.1R-15),” American Concrete Institute, Farmington Hills, MI, 88 pp.
3. Afifi, M.; Mohamed, H. M.; and Benmokrane, B., 2014, “Axial Capacity of Circular Concrete Columns Reinforced with GFRP Bars and Spirals,” Journal of Composites for Construction, ASCE, V. 18, No. 1, p. 04013017 doi: 10.1061/(ASCE)CC.1943-5614.000043810.1061/(ASCE)CC.1943-5614.0000438 ↗
4. Afifi, M. Z.; Mohamed, H. M.; and Benmokrane, B., 2015, “Theoretical Stress-Strain Model for Circular Concrete Columns Confined by GFRP Spirals and Hoops,” Engineering Structures, V. 102, No. 2015, pp. 202-213.10.1016/j.engstruct.2015.08.020 ↗
5. Alsayed, S. H.; Al-Salloum, Y. A.; Almusallam, T. H.; and Amjad, M. A., 1999, “Concrete Columns Reinforced by GFRP Rods,” Fourth International Symposium on Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures, SP-188, C.W. Dolan, S. H. Rizkalla, and A. Nanni, eds., American Concrete Institute, Farmington Hills, MI, pp. 103-112.
6. American Association of State Highway and Transportation Officials (AASHTO) LRFD, 2009, “Bridge Design Guide Specifications for GFRP-Reinforced Concrete Bridge Decks and Traffic Railings,” Washington, DC.
7. CAN/CSA S6-06, 2014, “Canadian Highway Bridge Design Code,” Canadian Standards Association, Rexdale, ON, Canada.
8. CAN/CSA S806-12, 2012, “Design and Construction of Building Components with Fiber Reinforced Polymers,” Canadian Standards Association, Rexdale, ON, Canada.
9. Choo, C. C.; Harik, I. E.; and Gesund, H., 2006, “Minimum Reinforcement Ratio for Fiber-Reinforced Polymer-Reinforced Concrete Rectangular Columns,” ACI Structural Journal, V. 103, No. 3, May-June, pp. 460-466.10.14359/15325 ↗
10. De Luca, A.; Matta, F.; and Nanni, A., 2010, “Behavior of Full-Scale Glass Fiber-Reinforced Polymer Reinforced Concrete Columns under Axial Load,” ACI Structural Journal, V. 107, No. 5, Sept.-Oct., pp. 589-596.10.14359/51663912 ↗
11. Elchalakani, M., and Ma, G., 2017, “Tests of Glass Fibre Reinforced Polymer Rectangular Concrete Columns Subjected to Concentric and Eccentric Axial Loading,” Engineering Structures, V. 151, pp. 93-104. doi: 10.1016/j.engstruct.2017.08.02310.1016/j.engstruct.2017.08.023 ↗
12. Guérin, M.; Mohamed, H. M.; Benmokrane, B.; Nanni, A.; and Shield, C. K., 2018a, “Eccentric Behavior of Full-Scale Reinforced Concrete Columns with Glass Fiber-Reinforced Polymer Bars and Ties,” ACI Structural Journal, V. 115, No. 2, Mar., pp. 489-499. doi: 10.14359/5170110710.14359/51701107 ↗
13. Guérin, M.; Mohamed, H. M.; Benmokrane, B.; Shield, C. K.; and Nanni, A., 2018b, “Effect of Glass Fiber-Reinforced Polymer Reinforcement Ratio on the Axial-Flexural Strength of Reinforced Concrete Columns,” ACI Structural Journal, V. 115, No. 4, July, pp. 1049-1062. doi: 10.14359/5170127910.14359/51701279 ↗
14. Hadhood, A.; Mohamed, H. M.; and Benmokrane, B., 2017a, “Axial Load-Moment Interaction Diagram of Circular Concrete Columns Reinforced with CFRP Bars and Spirals: Experimental and Theoretical Investigations,” Journal of Composites for Construction, ASCE, V. 21, No. 2.10.1061/(ASCE)CC.1943-5614.0000748 ↗
15. Hadhood, A.; Mohamed, H. M.; and Benmokrane, B., 2017b, “Failure Envelope of Circular Concrete Columns Reinforced with GFRP Bars and Spirals,” ACI Structural Journal, V. 114, No. 6, Nov.-Dec., pp. 1417-1428. doi: 10.14359/5168949810.14359/51689498 ↗
16. Hadhood, A.; Mohamed, H. M.; and Benmokrane, B., 2018a, “Assessing Stress-Block Parameters in Designing Circular High-Strength Concrete Members Reinforced with FRP Bars,” Journal of Structural Engineering, ASCE, V. 144, No. 10, p. 04018182 doi: 10.1061/(ASCE)ST.1943-541X.000217310.1061/(ASCE)ST.1943-541X.0002173 ↗
17. Hadhood, A.; Mohamed, H. M.; and Benmokrane, B., 2018b, “Flexural Stiffness of GFRP- and CFRP-RC Circular Members under Eccentric Loads Based on Experimental and Curvature Analysis,” ACI Structural Journal, V. 115, No. 4, July, pp. 1185-1198. doi: 10.14359/5170223510.14359/51702235 ↗
18. Hadhood, A.; Mohamed, H. M.; Ghrib, F.; and Benmokrane, B., 2017c, “Efficiency of Glass-Fiber Reinforced-Polymer (GFRP) Discrete Hoops and Bars in Concrete Columns under Combined Axial and Flexural Loads,” Composites. Part B, Engineering, V. 114, pp. 223-236. doi: 10.1016/j.compositesb.2017.01.06310.1016/j.compositesb.2017.01.063 ↗
19. Hadi, M. N.; Karim, H.; and Sheikh, M. N., 2016, “Experimental Investigations on Circular Concrete Columns Reinforced with GFRP Bars and Helices under Different Loading Conditions,” Journal of Composites for Construction, ASCE, V. 20, No. 4, p. 04016009 doi: 10.1061/(ASCE)CC.1943-5614.000067010.1061/(ASCE)CC.1943-5614.0000670 ↗
20. Hadi, M. N., and Youssef, J., 2016, “Experimental Investigation of GFRP-Reinforced and GFRP-Encased Square Concrete Specimens under Axial and Eccentric Load, and Four-Point Bending Test,” Journal of Composites for Construction, ASCE, V. 20, No. 5, p. 04016020 doi: 10.1061/(ASCE)CC.1943-5614.000067510.1061/(ASCE)CC.1943-5614.0000675 ↗
21. Hales, T. A.; Pantelides, C. P.; Sankholkar, P.; and Reaveley, L. D., 2017, “Analysis-Oriented Stress-Strain Model for Concrete Confined with Fiber-Reinforced Polymer Spirals,” ACI Structural Journal, V. 114, No. 5, Sept.-Oct., pp. 1263-1272. doi: 10.14359/5168978810.14359/51689788 ↗
22. Karim, H.; Sheikh, M. N.; and Hadi, M. N., 2017, “Longitudinal Reinforcement Limits for Fiber-Reinforced Polymer Reinforced Concrete Members,” ACI Structural Journal, V. 114, No. 3, May-June, pp. 687-696. doi: 10.14359/5168943910.14359/51689439 ↗
23. Khorramian, K., and Sadeghian, P., 2017, “Experimental and Analytical Behavior of Short Concrete Columns Reinforced with GFRP Bars under Eccentric Loading,” Engineering Structures, V. 151, pp. 761-773. doi: 10.1016/j.engstruct.2017.08.06410.1016/j.engstruct.2017.08.064 ↗
24. Mander, J. B.; Priestley, M. J.; and Park, R., 1988, “Theoretical Stress-Strain Model for Confined Concrete,” Journal of Structural Engineering, ASCE, V. 114, No. 8, pp. 1804-1826. doi: 10.1061/(ASCE)0733-9445(1988)114:8(1804)10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
25. Mohamed, H. M.; Afifi, M.; and Benmokrane, B., 2014, “Performance Evaluation of Concrete Columns Reinforced Longitudinally with FRP Bars and Confined with FRP Hoops and Spirals under Axial Load,” Journal of Bridge Engineering, ASCE, V. 19, No. 7, p. 04014020 doi: 10.1061/(ASCE)BE.1943-5592.000059010.1061/(ASCE)BE.1943-5592.0000590 ↗
26. Nanni, A.; De Luca, A.; and Zadeh, H., 2014, Reinforced Concrete with FRP Bars: Mechanics and Design, CRC Press, Boca Raton, FL.10.1201/b16669 ↗
27. Pantelides, C. P.; Gibbons, M. E.; and Reaveley, L. D., 2013, “Axial Load Behavior of Concrete Columns Confined with GFRP Spirals,” Journal of Composites for Construction, ASCE, V. 17, No. 3, pp. 305-313. doi: 10.1061/(ASCE)CC.1943-5614.000035710.1061/(ASCE)CC.1943-5614.0000357 ↗
28. Prachasaree, W.; Piriyakootorn, S.; Sangsrijun, A.; and Limkatanyu, S., 2015, “Behavior and Performance of GFRP Reinforced Concrete Columns with Various Types of Stirrups,” International Journal of Polymer Science, V. 2015, 9 pp.10.1155/2015/237231 ↗
29. Richart, F. E., 1933, “Reinforced Concrete Column Investigation,” ACI Journal Proceedings, V. 29, No. 2, Feb., pp. 275-284.10.14359/8273 ↗
30. Saatcioglu, M., and Razvi, S. R., 1992, “Strength and Ductility of Confined Concrete,” Journal of Structural Engineering, ASCE, V. 118, No. 6, pp. 1590-1607. doi: 10.1061/(ASCE)0733-9445(1992)118:6(1590)10.1061/(ASCE)0733-9445(1992)118:6(1590) ↗
31. Sankholkar, P. P.; Pantelides, C. P.; and Hales, T. A., 2018, “Confinement Model for Concrete Columns Reinforced with GFRP Spirals,” Journal of Composites for Construction, ASCE, V. 22, No. 3, p. 04018007 doi: 10.1061/(ASCE)CC.1943-5614.000084310.1061/(ASCE)CC.1943-5614.0000843 ↗
32. Shield, C. K.; Galambos, T. V.; and Gulbrandsen, P., 2011, “On the History and Reliability of the Flexural Strength of FRP Reinforced Concrete Members in ACI 440.1 R,” Fiber-Reinforced Polymer Reinforcement for Concrete Structures—10th International Symposium, SP-275, American Concrete Institute, Farmington Hills, MI, pp. 1-18.
33. Szerszen, M. M., and Nowak, A. S., 2003, “Calibration of Design Code for Buildings (ACI 318): Part 2—Reliability Analysis and Resistance Factors,” ACI Structural Journal, V. 100, No. 3, May-June, pp. 383-391.10.14359/12614 ↗
34. Tikka, T.; Francis, M.; and Teng, B., 2010, “Strength of Concrete Beam-Columns Reinforced with GFRP Bars,” 2nd International Structures Specialty Conference, Winnipeg, MB, Canada, pp. 46.1-46.10.
35. Tobbi, H.; Farghaly, A. S.; and Benmokrane, B., 2012, “Concrete Columns Reinforced Longitudinally and Transversally with Glass Fiber-Reinforced Polymers Bars,” ACI Structural Journal, V. 109, No. 4, July-Aug., pp. 551-558.10.14359/51683874 ↗
36. Tobbi, H.; Farghaly, A. S.; and Benmokrane, B., 2014, “Behavior of Concentrically Loaded Fiber-Reinforced Polymer Reinforced Concrete Columns with Varying Reinforcement Types and Ratios,” ACI Structural Journal, V. 111, No. 2, Mar.-Apr., pp. 375-385.10.14359/51686528 ↗
37. Xue, W.; Peng, F.; and Fang, Z., 2018, “Behavior and Design of Slender Rectangular Concrete Columns Longitudinally Reinforced with Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 115, No. 2, Mar., pp. 311-322. doi: 10.14359/5170113110.14359/51701131 ↗
38. Zadeh, H., and Nanni, A., 2013a, “Design of RC Columns Using Glass FRP Reinforcement,” Journal of Composites for Construction, ASCE, V. 17, No. 3, pp. 294-304. doi: 10.1061/(ASCE)CC.1943-5614.000035410.1061/(ASCE)CC.1943-5614.0000354 ↗
39. Zadeh, H., and Nanni, A., 2013b, “Reliability Analysis of Concrete Beams Internally Reinforced with Fiber-Reinforced Polymer Bars,” ACI Structural Journal, V. 110, No. 6, pp. 1023-1032.10.14359/51686157 ↗
40. Zadeh, H. J., and Nanni, A., 2017, “Flexural Stiffness and Second-Order Effects in Fiber-Reinforced Polymer-Reinforced Concrete Frames,” ACI Structural Journal, V. 114, No. 2, Mar.-Apr., pp. 533-544. doi: 10.14359/5168925710.14359/51689257 ↗