Flexural Strength of Corroded Reinforced Concrete Beams

1. ACI Committee 318, 2002, “Building Code Requirements for Structural Concrete (ACI 318-02) and Commentary,” American Concrete Institute, Farmington Hills, MI, 445 pp.

2. Ahmad, S., 2009, “Techniques for Inducing Accelerated Corrosion of Steel in Concrete,” Arabian Journal for Science and Engineering, V. 34, No. 2, pp. 95-104.

3. Ahmad, S., 2017, “Prediction of Residual Flexural Strength of Corroded Reinforced Concrete Beams,” Anti-Corrosion Methods and Materials, V. 64, No. 1, pp. 69-74. doi: 10.1108/ACMM-11-2015-159910.1108/ACMM-11-2015-1599 ↗

4. Amleh, L., and Ghosh, A., 2006, “Modeling the Effect of Corrosion on Bond Strength at the Steel-Concrete Interface with Finite-Element Analysis,” Canadian Journal of Civil Engineering, V. 33, No. 6, pp. 673-682. doi: 10.1139/l06-05210.1139/l06-052 ↗

5. ASTM A370-08a, 2008, “Standard Test Methods and Definitions for Mechanical Testing of Steel Products,” ASTM International, West Conshohocken, PA, 47 pp.

6. ASTM G1-03, 2003, “Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens,” ASTM International, West Conshohocken, PA, 9 pp.

7. Auyeung, Y.; Balaguru, P.; and Chung, L., 2000, “Bond Behavior of Corroded Reinforcement Bars,” ACI Materials Journal, V. 97, No. 2, Mar.-Apr., pp. 214-220.10.14359/826 ↗

8. Azad, A. K.; Ahmad, S.; and Al-Gohi, B. H. A., 2010, “Flexural Strength of Corroded Reinforced Concrete Beams,” Magazine of Concrete Research, V. 62, No. 6, pp. 405-414. doi: 10.1680/macr.2010.62.6.40510.1680/macr.2010.62.6.405 ↗

9. Bažant, Z., 1979, “Physical Model for Steel Corrosion in Concrete Sea Structures—Theory and Application,” Journal of the Structural Division, ASCE, V. 105, No. 6, pp. 1137-1166.10.1061/JSDEAG.0005169 ↗

10. Bicer, K.; Yalciner, H.; Pekrioglu, B. A.; and Kumbasaroglu, A., 2018, “Effect of Corrosion on Flexural Strength of Reinforced Concrete Beams with Polypropylene Fibers,” Construction and Building Materials, V. 185, pp. 574-588. doi: 10.1016/j.conbuildmat.2018.07.02110.1016/j.conbuildmat.2018.07.021 ↗

11. Cabrera, J. G., 1996, “Deterioration of Concrete Due to Reinforcement Steel Corrosion,” Cement and Concrete Composites, V. 18, No. 1, pp. 47-59. doi: 10.1016/0958-9465(95)00043-710.1016/0958-9465(95)00043-7 ↗

12. Campione, G., and Cannella, F., 2018, “Engineering Failure Analysis of Corroded RC Beams in Flexure and Shear,” Engineering Failure Analysis, V. 86, pp. 100-114. doi: 10.1016/j.engfailanal.2017.12.01510.1016/j.engfailanal.2017.12.015 ↗

13. Campione, G.; Cannella, F.; and Cavaleri, L., 2017, “Shear and Flexural Strength Prediction of Corroded R. C. Beams,” Construction and Building Materials, V. 149, pp. 395-405. doi: 10.1016/j.conbuildmat.2017.05.12510.1016/j.conbuildmat.2017.05.125 ↗

14. Chung, L.; Cho, S. H.; Kim, J. H. J.; and Yi, S. T., 2004, “Correction Factor Suggestion for ACI Development Length Provisions Based on Flexural Testing of RC Slabs with Various Levels of Corroded Reinforcing Bars,” Engineering Structures, V. 26, No. 8, pp. 1013-1026. doi: 10.1016/j.engstruct.2004.01.00810.1016/j.engstruct.2004.01.008 ↗

15. Coronelli, D., and Gambarova, P., 2004, “Structural Assessment of Corroded Reinforced Concrete Beams: Modeling Guidelines,” Journal of Structural Engineering, ASCE, V. 130, No. 8, pp. 1214-1224. doi: 10.1061/(ASCE)0733-9445(2004)130:8(1214)10.1061/(ASCE)0733-9445(2004)130:8(1214) ↗

16. El Maaddawy, T.; Chahrour, A.; and Soudki, K., 2006, “Effect of Fiber-Reinforced Polymer Wraps on Corrosion Activity and Concrete Cracking in Chloride-Contaminated Concrete Cylinders,” Journal of Composites for Construction, ASCE, V. 10, No. 2, pp. 139-147. doi: 10.1061/(ASCE)1090-0268(2006)10:2(139)10.1061/(ASCE)1090-0268(2006)10:2(139) ↗

17. El Maaddawy, T.; Soudki, K.; and Topper, T., 2005, “Long-Term Performance of Corrosion-Damaged Reinforced Concrete Beams,” ACI Structural Journal, V. 102, No. 5, Sept.-Oct., pp. 649-656.10.14359/14660 ↗

18. El-Sayed, A. K.; Hussain, R. R.; and Shuraim, A. B., 2016, “Influence of Stirrup Corrosion on Shear Strength of Reinforced Concrete Slender Beams,” ACI Structural Journal, V. 113, No. 6, Nov.-Dec., pp. 1223-1232. doi: 10.14359/5168914710.14359/51689147 ↗

19. Eligehausen, R.; Ozbolt, J.; and Mayer, U., 1998, “Contribution of Concrete Between Cracks at Inelastic Steel Strains and Conclusions for the Optimization of Bond,” SP-180, Bond and Development Length of Reinforcement, A Tribute to Dr. Peter Gergely, R. Leon, ed., American Concrete Institute, Farmington Hills, MI, pp. 45-80.

20. Hanjari, K. Z.; Kettil, P.; and Lundgren, K., 2011, “Analysis of Mechanical Behavior of Corroded Reinforced Concrete Structures,” ACI Structural Journal, V. 108, No. 5, Sept.-Oct., pp. 532-541.10.14359/51683210 ↗

21. Jnaid, F., and Aboutaha, R. S., 2016, “Residual Flexural Strength of Corroded Reinforced Concrete Beams,” Engineering Structures, V. 119, pp. 198-216. doi: 10.1016/j.engstruct.2016.04.01810.1016/j.engstruct.2016.04.018 ↗

22. Khan, I.; Francois, R.; and Castel, A., 2014, “Prediction of Reinforcement Corrosion Using Corrosion Induced Cracks Width in Corroded Reinforced Concrete Beams,” Cement and Concrete Research, V. 56, pp. 84-96. doi: 10.1016/j.cemconres.2013.11.00610.1016/j.cemconres.2013.11.006 ↗

23. Lee, H. S.; Kage, T.; Noguchi, T.; and Tomosawa, F., 1999, “The Evaluation of Flexural Strength of RC Beams Damaged by Rebar Corrosion,” Proceedings of the 8th International Conference, Durability of Building Materials and Components, Ottawa, ON, Canada, pp. 321-330.

24. Liu, Y., and Weyers, R. E., 1998, “Modeling the Time-to-Corrosion Cracking in Chloride Contaminated Reinforced Concrete Structures,” ACI Materials Journal, V. 95, No. 6, Nov.-Dec., pp. 675-680.10.14359/410 ↗

25. Ma, Y.; Che, Y.; and Gong, J., 2012, “Behavior of Corrosion Damaged Circular Reinforced Concrete Columns under Cyclic Loading,” Construction and Building Materials, V. 29, pp. 548-556. doi: 10.1016/j.conbuildmat.2011.11.00210.1016/j.conbuildmat.2011.11.002 ↗

26. Mousa, M. I., 2016, “Effect of Bond Loss of Tension Reinforcement on the Flexural Behaviour of Reinforced Concrete Beams,” HBRC Journal, V. 12, No. 3, pp. 235-241. doi: 10.1016/j.hbrcj.2015.01.00310.1016/j.hbrcj.2015.01.003 ↗

27. O’Flaherty, F. J.; Mangart, P. S.; Lambert, P.; and Browne, E. H., 2008, “Effect of Under-Reinforcement on the Flexural Strength of Corroded Beams,” Materials and Structures, V. 41, No. 2, pp. 311-321. doi: 10.1617/s11527-007-9241-110.1617/s11527-007-9241-1 ↗

28. Paul, S. C.; Babafemi, A. J.; Conradie, K.; and van Zijl, G. P. A. G., 2016, “Applied Voltage on Corrosion Mass Loss and Cracking Behavior of Steel-Reinforced SHCC and Mortar Specimens,” Journal of Materials in Civil Engineering, ASCE, V. 29, No. 5, pp. 1-9.10.1061/(ASCE)MT.1943-5533.0001807 ↗

29. Rodriguez, J.; Ortega, L. M.; and Casal, J., 1997, “Load-Carrying Capacity of Concrete Structures with Corroded Reinforcement,” Construction and Building Materials, V. 11, No. 4, pp. 239-248. doi: 10.1016/S0950-0618(97)00043-310.1016/S0950-0618(97)00043-3 ↗

30. Suffern, C.; El-Sayed, A. K.; and Soudki, K., 2010, “Shear Strength of Disturbed Regions with Corroded Stirrups in Reinforced Concrete Beams,” Canadian Journal of Civil Engineering, V. 37, No. 8, pp. 1045-1056. doi: 10.1139/L10-03110.1139/L10-031 ↗

31. Torres-Acosta, A. A.; Navarro-Gutierreza, S.; and Terán-Guillén, J., 2007, “Residual Flexure Capacity of Corroded Reinforced Concrete Beams,” Engineering Structures, V. 29, No. 6, pp. 1145-1152. doi: 10.1016/j.engstruct.2006.07.01810.1016/j.engstruct.2006.07.018 ↗

32. Vecchio, F. J., and Collins, M. P., 1986, “The Modified Compression Field Theory for Reinforced Concrete Elements Subjected to Shear,” ACI Journal Proceedings, V. 83, No. 2, Mar.-Apr., pp. 219-231.10.14359/10416 ↗

33. Vidal, T.; Castel, A.; and François, R., 2004, “Analyzing Crack Width to Predict Corrosion in Reinforced Concrete,” Cement and Concrete Research, V. 34, No. 1, pp. 165-174. doi: 10.1016/S0008-8846(03)00246-110.1016/S0008-8846(03)00246-1 ↗

34. Yalciner, H.; Eren, O.; and Sensoy, S., 2012, “An Experimental Study on the Bond Strength between Reinforcement Bars and Concrete as a Function of Concrete Cover, Strength and Corrosion Level,” Cement and Concrete Research, V. 42, No. 5, pp. 643-655. doi: 10.1016/j.cemconres.2012.01.00310.1016/j.cemconres.2012.01.003 ↗

35. Yalciner, H.; Kumbasaroglu, A.; Ertuc, İ.; and Turan, A. İ., 2018, “Confinement Effect of Geo-Grid and Conventional Shear Reinforcement Bars Subjected to Corrosion,” Structures, V. 13, pp. 139-152. doi: 10.1016/j.istruc.2017.12.00410.1016/j.istruc.2017.12.004 ↗

36. Yalciner, H.; Sensoy, S.; and Eren, O., 2015, “Seismic Performance Assessment of a Corroded 50-Year-Old Reinforced Concrete Building,” Journal of Structural Engineering, ASCE, V. 141, No. 12, pp. 1-11. doi: 10.1061/(ASCE)ST.1943-541X.000126310.1061/(ASCE)ST.1943-541X.0001263 ↗

37. Yang, S. Y.; Song, X. B.; Jia, H. X.; Chen, X.; and Liu, X. L., 2016, “Experimental Research on Hysteretic Behaviors of Corroded Reinforced Concrete Columns with Different Maximum Amounts of Corrosion of Rebar,” Construction and Building Materials, V. 121, pp. 319-327. doi: 10.1016/j.conbuildmat.2016.06.00210.1016/j.conbuildmat.2016.06.002 ↗

38. Zhang, R.; Castel, A.; and Francois, R., 2010, “Concrete Cover Cracking with Reinforcement Corrosion of RC Beam During Chloride-Induced Corrosion Process,” Cement and Concrete Research, V. 40, No. 3, pp. 415-425. doi: 10.1016/j.cemconres.2009.09.02610.1016/j.cemconres.2009.09.026 ↗