journal article·2014-05Open access

Dynamic Behavior of Rocking and Hybrid Cantilever walls in Precast Concrete Building

Andrea Belleri, Matthew J. Schoettler, José I. Restrepo, Robert B. Fleischman

ACI Structural Journal· Volume 111· Issue 3

Abstract

This paper discusses the dynamic response of precast, post- tensioned, rocking, and hybrid cantilever walls that provided lateral force resistance to a three-story precast concrete building built at half-scale. The building was subjected to extensive shake- table testing on the NEES large high-performance outdoor shake table. The tests provided a landmark opportunity to observe the dynamic response of this type of lateral force-resisting system. Excellent performance was observed overall. Comparison between the assumptions made during the design of the wall and the exper- imental results allowed the validation of the presented design procedure and of the reinforcement detailing in the critical region at the base of the walls.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Seismic Performance and Analysis · Structural Engineering and Vibration Analysis · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Seismic Design of Unbonded Post-Tensioned Precast Concrete Walls with Supplemental Viscous Damping
2. Hybrid Post-Tensioned Precast Concrete Walls for Use in Seismic Regions10.15554/pcij.09012002.36.59 ↗
3. Seismic Design of Partially Post-Tensioned Precast Concrete Walls10.15554/pcij.07012005.100.125 ↗
4. Seismic Performance of Self-Centering Structural Walls Incorporating Energy Dissipators10.1061/(ASCE)0733-9445(2007)133:11(1560) ↗
5. Shake-Table Tests of Confined-Masonry Rocking Walls with Supplementary Hysteretic Damping10.1080/13632460802715040 ↗
6. ACI Innovation Task Group 5, “Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing (ACI ITG-5.1),” American Concrete Institute, Farmington Hills, MI, 2008, 19 pp.
7. ACI Innovation Task Group 5, “Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI ITG-5.1 (ACI ITG-5.2),” American Concrete Institute, Farmington Hills, MI, 2009, 21 pp.
8. Pérez, F. J.; Pessiki, S.; Sause, R.; and Lu, L., “Lateral Load Tests of Unbonded Post-Tensioned Precast Concrete Walls,”Large-Scale Structural Testing, ACI SP-211, American Concrete Institute, Farmington Hills, MI, 2003, pp. 161-182.10.1016/B978-008044100-9/50055-3 ↗
9. Analytical and Experimental Lateral Load Behavior of Unbonded Post-Tensioned Precast Concrete Walls10.1061/(ASCE)0733-9445(2007)133:11(1531) ↗
10. Displacement-Based Design of Precast Walls with Additional Dampers10.1080/13632460902813265 ↗
11. Preliminary Results and Conclusions from the PRESSS Five-Story Precast Concrete Test-Building10.15554/pcij.11011999.42.67 ↗
12. Seismic Performance of Precast Reinforced and Prestressed Concrete Walls10.1061/(ASCE)0733-9445(2003)129:3(286) ↗
13. Dynamic Testing of Precast, Post-Tensioned Rocking Walls Systems with Alternative Dissipating Solutions10.5459/bnzsee.41.2.90-103 ↗
14. Preliminary Results of the Shake-Table Testing for the Development of a Diaphragm Seismic Design Methodology10.15554/pcij.01012009.100.124 ↗
15. Precast Diaphragm Seismic Design Methodology (DSDM) Project, Part 2: Research Program10.15554/pcij.11012005.14.31 ↗
16. Theoretical Stress-Strain Model for Confined Concrete10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
17. ASTM A706/A706M, “Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement,” ASTM International, West Conshohocken, PA, 2013, 7 pp.
18. Effects of Loading Conditions on the Behavior of Unbounded Post-Tensioning Strand-Anchorage Systems10.15554/pcij.01012012.76.96 ↗
19. Earthquake-Induced Floor Horizontal Accelerations in Buildings10.1002/eqe.149 ↗
20. Characterizing Acceleration Spikes Due to Stiffness Changes in Nonlinear Systems10.1002/eqe.1009 ↗
21. Seismic Protection of Light Secondary Systems through Different Base Isolation Systems10.1080/13632460309350447 ↗
22. The Use of Electrical Resistance Strain Gauges, and the Effect of Aggregate Size on Gauge Length in Connection with the Testing of Concrete10.1680/macr.1959.1.1.35 ↗