New Damage Ratio Strength Criterion for Concrete and Lightweight Aggregate Concrete

1. Song, Y. P., The Constitutive Relation and Failure Criterion of Concrete, China Water & Power Press, Beijing, China, 2002, 199 pp. (in Chinese)

2. Guo, Z. H., The Strength and Deformation of Concrete (Experimental Basis and Constitutive Relationship), Tsinghua University Press, Beijing, China, 1997. (in Chinese)

3. Zhou, Z. B., and Lu, C. F., “A New Strength Criterion of Plain Concrete under Triaxial Stresses Conditions,” Acta Mechanica Solida Sinica, V. 20, No. 3, 1999, pp. 272-280.

4. Yu, M.-H., Concrete Strength Theory and its Application, Higher Education Press, Beijing, China, 2002.

5. Yu, M.-H., “Twin Shear Stress Yield Criterion,” International Journal of Mechanical Sciences, V. 25, No. 1, 1983, pp. 71-74. doi: 10.1016/0020-7403(83)90088-710.1016/0020-7403(83)90088-7 ↗

6. Yu, M. H., and He, L. N., “A New Model and Theory on Yield and Failure of Materials under the Complex Stress State,” Mechanical Behaviour of Materials VI, Proceedings of the Sixth International Conference, Kyoto, Japan, July 29-Aug. 2, 1991, first edition, Elsevier, Amsterdam, the Netherlands, 1992, pp. 841-846.10.1016/B978-0-08-037890-9.50389-6 ↗

7. Yu, M. H.; He, L. N.; and Liu, C. Y., “Generalized Twin Shear Stress Yield Criterion and its Generalization,” Chinese Science Bulletin, V. 37, No. 24, 1992, pp. 2085-2089.

8. Yu, M.-H.; Kolupaev, V. A.; Li, Y.-M.; and Li, J.-C., “Advances in Unified Strength Theory and its Generalization,” Procedia Engineering, Proceedings of the 11th International Conference on the Mechanical Behavior of Materials (ICM11), Villa Erba, Como, Italy, V. 10, 2011, pp. 2508-2513.10.1016/j.proeng.2011.04.413 ↗

9. Ding, F. X., and Yu, Z. W., “Strength Criterion for Plain Concrete under Multiaxial Stress based on Damage Poisson’s Ratio,” Acta Mechanica Solida Sinica, V. 19, No. 4, Dec. 2006, pp. 307-315. doi: 10.1007/s10338-006-0637-110.1007/s10338-006-0637-1 ↗

10. Lu, X., and Hsu, C.-T. T., “Tangent Poisson’s Ratio of High-Strength Concrete in Triaxial Compression,” Magazine of Concrete Research, V. 59, No. 1, Feb. 2007, pp. 69-77. doi: 10.1680/macr.2007.59.1.6910.1680/macr.2007.59.1.69 ↗

11. Kupfer, H.; Hilsdorf, H. K.; and Rusch, H., “Behavior of Concrete Under Biaxial Stresses,” ACI Journal Proceedings, V. 66, No. 8, Aug. 1969, pp. 656-666.10.14359/7388 ↗

12. Zheng, R. M., “Experimental Investigation on Strength and Deformation of Concrete under Biaxial Compression-Compression Stress State,” Tsinghua University, Beijing, China, 1987.

13. Candappa, D. C.; Sanjayan, J. G.; and Setunge, S., “Complete Triaxial Stress-Strain Curves of High-Strength Concrete,” Journal of Materials in Civil Engineering, ASCE, V. 13, No. 3, June 2001, pp. 209-215. doi: 10.1061/(ASCE)0899-1561(2001)13:3(209)10.1061/(ASCE)0899-1561(2001)13:3(209) ↗

14. Wang, J. Z., “Investigation of Strength Tests and Failure Criterion of Concrete under Triaxial Compression-Tension,” Tsinghua University, Beijing, China, 1989.

15. Chern, J.-C.; Yang, H.-J.; and Chen, H. W., “Behavior of Steel Fiber Reinforced Concrete in Multiaxial Loading,” ACI Materials Journal, V. 89, No. 1, Jan.-Feb. 1993, pp. 32-40.10.14359/1242 ↗

16. Rong, C.; Shi, Q. X.; Zhang, T.; and Zhao, H. C., “New Failure Criterion Models for Concrete under Multiaxial Stress in Compression,” Construction and Building Materials, V. 161, Feb. 2018, pp. 432-441. doi: 10.1016/j.conbuildmat.2017.11.10610.1016/j.conbuildmat.2017.11.106 ↗

17. Song, Y. P.; Zhao, G. F.; Peng, F.; and Shen, J. N., “Failure Criterion of Concrete under Multiaxial Stress,” Fifth Symposium on Fracture and Strength of Rock and Concrete, Changsha, China, 1993.

18. Ye, X. G., “Investigation of Strength Tests and Failure Criterion of Concrete under Triaxial Compression,” Tsinghua University, Beijing, China, 1988.

19. Liang, W.; Wu, P. G.; Zhao, G. Y.; and Liu, H. C., “Principles and Failure Criterion of Triaxial Stress of High Strength Concrete (HSC),” Journal of Building Structures, China, V. 33, No. 1, 2003, pp. 17-29. (in Chinese)

20. Liu, H. C., “Experimental Investigation on Strength and Deformation of High-Strength Concrete under Triaxial Compression and Compression-Compression-Tension Stresses Conditions,” Tsinghua University, Beijing, China, 1997.

21. Xie, J.; Elwi, A. E.; and MacGregor, J. G., “Mechanical Properties of Three High-Strength Concretes Containing Silica Fume,” ACI Materials Journal, V. 92, No. 2, Mar.-Apr. 1995, pp. 135-143.10.14359/9764 ↗

22. Song, Y. P., and He, Z. J., “Experimental Investigation on Strength and Deformation of Plain High-Strength High-Performance Concrete under Multiaxial Compression,” Chinese Journal of Rock Mechanics and Engineering, China, V. 27, 2008, pp. 3575-3584. (in Chinese)

23. Folino, P.; Etse, G.; and Will, A., “Performance Dependent Failure Criterion for Normal- and High-Strength Concretes,” Journal of Engineering Mechanics, ASCE, V. 135, No. 12, Dec. 2009, pp. 1393-1409. doi: 10.1061/(ASCE)EM.1943-7889.000004810.1061/(ASCE)EM.1943-7889.0000048 ↗

24. Song, Y. P.; Zhao, G. F.; Peng, F.; and Shen, J. N., “Behavior of Strength of Lightweight Concrete under Triaxial Compressive Stress,” Journal of Hydraulic Engineering, China, No. 6, 1993, pp. 10-16. (in Chinese)

25. Song, Y. P., and Wang, L. C., “A Four-Parameter Multi-Axial Strength Criterion for Lightweight Aggregate (LWA) Concrete,” The Sixth ISOPE Pacific/Asia Offshore Mechanics Symposium, Vladivostok, Russia, Sept. 2004.

26. Wang, W. Z.; Chen, Y. J.; and Chen, F. Y., “An Egg Shaped Failure Criterion for Lightweight Aggregate Concrete,” Advanced Materials Research, V. 250-253, Proceedings of The 1st International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2011), Haikou, China, June 18-20, 2011, pp. 2085-2088.10.4028/www.scientific.net/AMR.250-253.2085 ↗

27. Hsieh, S. S.; Ting, E. C.; and Chen, W. F., “A Plastic-Fracture Model for Concrete,” International Journal of Solids and Structures, V. 18, No. 3, 1982, pp. 181-197. doi: 10.1016/0020-7683(82)90001-410.1016/0020-7683(82)90001-4 ↗

28. Kotsovos, M. D., “A Mathematical Description of the Strength Properties of Concrete under Generalized Stress,” Magazine of Concrete Research, V. 31, No. 108, Sept. 1979, pp. 151-158. doi: 10.1680/macr.1979.31.108.15110.1680/macr.1979.31.108.151 ↗

29. Ottosen, N. S., “A Failure Criterion for Concrete,” Journal of Engineering Mechanics, ASCE, V. 103, No. 4, Aug. 1977, pp. 527-535.10.1061/JMCEA3.0002248 ↗

30. William, K. J., and Warnke, E. P., “Constitutive Models for the Triaxial Behavior of Concrete,” Proceedings of the International Association for Bridge and Structural Engineering, from the Seminar on Concrete Structures Subjected to Triaxial Stress, Bergamo, Italy, May 17-19, 1974, V. 19, 1975, pp. 1-30.

31. Podgórski, J., “General Failure Criterion for Isotropic Media,” Journal of Engineering Mechanics, ASCE, V. 111, No. 2, Jan. 1985, pp. 188-201. doi: 10.1061/(ASCE)0733-9399(1985)111:2(188)10.1061/(ASCE)0733-9399(1985)111:2(188) ↗

32. Yu, M. H.; Liu, F. Y.; Li, Y.; and Liu, F., “Twin Shear Stress Five-Parameter Criterion and its Smooth Ridge Model,” International Academic Publishers, V. 1, 1989, pp. 244-248.

33. Wang, L.-C., “Multi-Axial Strength Criterion of Lightweight Aggregate (LWA) Concrete under the Unified Twin-Shear Strength Theory,” Structural Engineering and Mechanics, V. 41, No. 4, 2012, pp. 495-508. doi: 10.12989/sem.2012.41.4.49510.12989/sem.2012.41.4.495 ↗

34. Ye, Y.-X.; Zhang, Z.-Y.; Liu, Y.; and Zhang, C.-M., “A Strength Criterion for Lightweight Aggregate Concrete based on Warhead Yield,” Engineering Mechanics, V. 36, No. 1, 2019, pp. 138-145.

35. Lai, W. D.; Chen, J.; Li, G. L., “Research on Strength Softening of Concrete under Biaxial Tension,” Concrete, No. 6, 2002, pp. 21-30.

36. Li, W. Z., and Guo Z. H., “Experimental Investigation on Strength and Deformation of Concrete under Biaxial Tension-Compression Stresses Conditions,” Journal of Hydraulic Engineering, No. 8, 1991, pp. 51-56.

37. Yu, Z. P.; Huang, Q.; and Xie, X. H., “Experimental Study on Mechanical Properties of Ordinary Concrete and Lightweight Aggregate Concrete,” Journal of Building Materials, V. 22, No. 3, 2019, pp. 371-377.

38. Liu, H.-Y., and Song, Y.-P., “Experimental Study of Lightweight Aggregate Concrete under Multiaxial Stresses,” Journal of Zhejiang University-SCIENCE A, V. 11, No. 8, Aug. 2010, pp. 545-554. doi: 10.1631/jzus.A090061910.1631/jzus.A0900619 ↗

39. Ren, Y.; Yu, Z. P.; Huang, Q.; and Ren, Z., “Constitutive Model and Failure Criterions for Lightweight Aggregate Concrete: A True Triaxial Experimental Test,” Construction and Building Materials, V. 171, May 2018, pp. 759-769. doi: 10.1016/j.conbuildmat.2018.03.21910.1016/j.conbuildmat.2018.03.219 ↗