Screening Method for Very-Low-Strength Concrete

1. Shannag, M. J., “High Strength Concrete Containing Natural Pozzolan and Silica Fume,” Cement and Concrete Composites, V. 22, No. 6, 2000, pp. 399-406. doi: 10.1016/S0958-9465(00)00037-810.1016/S0958-9465(00)00037-8 ↗

2. Gjørv, O. E., “High-Strength Concrete,” Developments in the Formulation and Reinforcement of Concrete, Woodhead Publishing, 2008. pp. 153-170.10.1016/B978-0-08-102616-8.00007-1 ↗

3. De Stefano, M.; Tanganelli, M.; and Viti, S., “On the Variability of Concrete Strength as a Source of Irregularity in Elevation for Existing RC Buildings: A Case Study,” Bulletin of Earthquake Engineering, V. 11, No. 5, 2013, pp. 1711-1726. doi: 10.1007/s10518-013-9463-210.1007/s10518-013-9463-2 ↗

4. Nasirzadeh, F.; Ghasem Kashi, M.; Khanzadi, M.; Carmichael, D. G.; and Akbarnezhad, A., “A Hybrid Approach for Quantitative Assessment of Construction Projects Risks: The Case Study of Poor Quality Concrete,” Computers & Industrial Engineering, V. 131, Mar, 2019, pp. 306-319. doi: 10.1016/j.cie.2019.03.04510.1016/j.cie.2019.03.045 ↗

5. Ahmad, S.; Pilakoutas, K.; Khan, Q. Z.; and Neocleous, K., “Stress–Strain Model for Low-Strength Concrete in Uni-Axial Compression,” Arabian Journal for Science and Engineering, V. 40, No. 2, 2015, pp. 313-328. doi: 10.1007/s13369-014-1411-110.1007/s13369-014-1411-1 ↗

6. ACI Committee 214, “Guide To Evaluation of Strenght Test Results of Concrete (ACI 214R-11),” American Concrete Institute, Farmington Hills, MI, 2011, 16 pp.

7. Kyriakides, N.; Ahmad, S.; Pilakoutas, K.; Neocleous, K.; and Chrysostomou, C. Z., “A Probabilistic Analytical Seismic Vulnerability Assessment Framework for Substandard Structures in Developing Countries,” Earthquakes and Structures, V. 6, No. 6, 2014, pp. 665-687. doi: 10.12989/eas.2014.6.6.66510.12989/eas.2014.6.6.665 ↗

8. Kaneko, F., “International Seminar on Seismic Design, Retrofitting and Good Practices of Building Construction for Safer Cities,” Project for Capacity Development on Natural Disaster-Resistant Techniques of Construction and Retrofitting for Public Buildings (CNCRP), 2016.

9. Yosuke, N.; Matsutaro, S.; and Atsushi, M., “Predicting Concrete Strength Using a Test Hammer for Existing Reinforced Concrete Buildings in Bangladesh,” Structure (London, England), V. IV, 2016, pp. 513-514. (in Japanese)

10. Aydin, A. C.; Karakoç, M. B.; Düzgün, O. A.; and Bayraktutan, M. S., “Effect of Low Quality Aggregates on the Mechanical Properties of Lightweight Concrete,” Scientific Research and Essays, V. 5, No. 10, 2010, pp. 1133-1140.

11. Paul, B. K., and Bhuiyan, R. H., “Urban Earthquake Hazard: Perceived Seismic Risk and Preparedness in Dhaka City, Bangladesh,” Disasters, V. 34, No. 2, 2010, pp. 337-359. doi: 10.1111/j.1467-7717.2009.01132.x10.1111/j.1467-7717.2009.01132.x ↗

12. Islam, M. S.; Alwashali, H.; Sen, D.; and Maeda, M., “A Proposal of Visual Rating Method to Set the Priority of Detailed Evaluation for Masonry Infilled RC Building,” Bulletin of Earthquake Engineering, V. 18, No. 4, 2020, pp. 1613-1634. doi: 10.1007/s10518-019-00763-510.1007/s10518-019-00763-5 ↗

13. Szilágyi, K.; Borosnyói, A.; and Mikó, T., “Comparison of the Inherent Variability in Rebound Hammer Tests Performed with Different Testing Instruments,” Epitoanyag - Journal of Silicate Based and Composite Materials, V. 65, No. 3, 2014, pp. 68-75.10.14382/epitoanyag-jsbcm.2013.14 ↗

14. Tsuji, N.; Yamane, M.; Tanikawa, Y. et al., “Non-Destructive Test Method Research on the Strength Estimation Method of Low-Strength Concrete by Various Non-Destructive Test Methods (Part 4: Applicability of the Scratch Method to the Vertical Concrete Surface),” Proceedings of the Architectural Institute of Japan Conference, Hokuriku, 2010, pp. 215-216.

15. Pucinotti, R., “In Situ Concrete Strength Assessment: Influence of the Aggregate Hardness on the Windsor Probe Test Results,” Journal of Building Appraisal, V. 5, No. 1, 2009, pp. 75-85. doi: 10.1057/jba.2009.1410.1057/jba.2009.14 ↗

16. Schmidt, E., “A Non-Destructive Concrete Tester,” Concrete (London), V. 59, 1951, pp. 34-35.

17. Szilágyi, K.; Borosnyói, A.; and Zsigovics, I., “Rebound Surface Hardness of Concrete: Introduction of an Empirical Constitutive Model,” Construction and Building Materials, V. 25, No. 5, 2011, pp. 2480-2487. doi: 10.1016/j.conbuildmat.2010.11.07010.1016/j.conbuildmat.2010.11.070 ↗

18. Chung, H. W., and Bungey, J. H., “Effects of Embedded Steel Bars Upon Ultrasonic Testing Of Concrete,” Magazine of Concrete Research, V. 31, No. 106, 1979, pp. 47-48. doi: 10.1680/macr.1979.31.106.4710.1680/macr.1979.31.106.47 ↗

19. Breysse, D., “Nondestructive Evaluation of Concrete Strength: An Historical Review and a New Perspective by Combining NDT Methods,” Construction and Building Materials, V. 33, 2012, pp. 139-163. doi: 10.1016/j.conbuildmat.2011.12.10310.1016/j.conbuildmat.2011.12.103 ↗

20. Grieb, W. E., “Use of Swiss Hammer for Estimating Compressive Strength of Hardened Concrete,” Public Roads, V. 30, No. 2, 1958, p. 45.

21. EN 13791, “Assessment of In-Situ Compressive Strength in Structures and Precast Concrete Components,” European Committee for Standardization, Brussels, Belgium, 2007, pp. 744-748.

22. Kazemi, M.; Madandoust, R.; and de Brito, J., “Compressive Strength Assessment of Recycled Aggregate Concrete Using Schmidt Rebound Hammer and Core Testing,” Construction and Building Materials, V. 224, 2019, pp. 630-638. doi: 10.1016/j.conbuildmat.2019.07.11010.1016/j.conbuildmat.2019.07.110 ↗

23. Saha, A. S., and Amanat, K. M., “Rebound Hammer Test to Predict In-Situ Strength of Concrete Using Recycled Concrete Aggregates, Brick Chips and Stone Chips,” Construction and Building Materials, V. 268, 2021, p. 121088. doi: 10.1016/j.conbuildmat.2020.12108810.1016/j.conbuildmat.2020.121088 ↗

24. Ravindrajah, R. S.; Loo, Y. H.; and Tam, C. T., “Strength Evaluation of Recycled-Aggregate Concrete by In-Situ Tests,” Materials and Structures, V. 21, No. 4, 1988, pp. 289-295. doi: 10.1007/BF0248182810.1007/BF02481828 ↗

25. Qasrawi, H., “Concrete Strength by Combined Nondestructive Methods Simply and Reliably Predicted,” Cement and Concrete Research, V. 30, No. 5, 2000, pp. 739-746. doi: 10.1016/S0008-8846(00)00226-X10.1016/S0008-8846(00)00226-X ↗

26. Hobbs, B., and Kebir, M. T., “Non-Destructive Testing Techniques for the Forensic Engineering Investigation of Reinforced Concrete Buildings,” Forensic Science International, V. 167, No. 2-3, 2007, pp. 167-172. doi: 10.1016/j.forsciint.2006.06.06510.1016/j.forsciint.2006.06.065 ↗

27. Aydin, A., and Basu, A., “The Schmidt Hammer in Rock Material Characterization,” Engineering Geology, V. 81, No. 1, 2005, pp. 1-14. doi: 10.1016/j.enggeo.2005.06.00610.1016/j.enggeo.2005.06.006 ↗

28. Brozovsky, J., “High-Strength Concrete-NDT with Rebound Hammer: Influence of Aggregate on Test Results,” Nondestructive Testing and Evaluation, V. 29, No. 3, 2014, pp. 255-268. doi: 10.1080/10589759.2014.92689710.1080/10589759.2014.926897 ↗

29. Cikrle, P.; Kocab, D.; and Misak, P., “Experimental Determination of the Initial Compressive Strength of Concrete Using a Rebound Test Hammer,” IOP Conference Series. Materials Science and Engineering, V. 385, No. 1, 2018, p. 012008 doi: 10.1088/1757-899X/385/1/01200810.1088/1757-899X/385/1/012008 ↗

30. Kasai, Y.; Noboru, Y.; and Kenji, N., “Estimate of Concrete Strength at 28 Days by the Scratch Wound Width at Early Age,” Proceedings of the 2nd Symposium on Prospects of Non-Destructive Testing Method for Concrete Structure, 2006, pp. 417-420. (in Japanese)

31. Nishikawa, N.; Yamane, M.; Tanigawa, Y. et al., “Study on Strength Estimation Method of Low-Strength Concrete by Various Non-Destructuve Test Methods (Part 2: Scratch Method),” Summary of Academic Lectures at the Annual Meeting of the Architectural Institute of Japan (Kyushu), A-1, 2007, pp. 239-240.

32. Szilágyi, K.; Borosnyói, A.; and Zsigovics, I., “Extensive Statistical Analysis of the Variability of Concrete Rebound Hardness Based on a Large Database of 60 Years Experience,” Construction and Building Materials, V. 53, 2014, pp. 333-347. doi: 10.1016/j.conbuildmat.2013.11.11310.1016/j.conbuildmat.2013.11.113 ↗

33. Nagelkerke, N. J. D., “A Note on a General Definition of the Coefficient of Determination,” Biometrika, V. 78, No. 3, 1991, pp. 691-692. doi: 10.1093/biomet/78.3.69110.1093/biomet/78.3.691 ↗

34. Zoldners, N. G., “Calibration and Use of Impact Test Hammer,” ACI Journal Proceedings, V. 54, No. 8, Aug. 1957, pp. 161-165.

35. Ballinger, C. A., “Strength Evaluation of Existing Concrete Buildings,” ACI Journal Proceedings, V. 64, No. 11, Nov. 1967, pp. 1-24.10.14359/7598 ↗

36. Uddin, M. T.; Mahmood, A. H.; Kamal, M. R. I.; Yashin, S. M.; and Zihan, Z. U. A., “Effects of Maximum Size of Brick Aggregate on Properties of Concrete,” Construction and Building Materials, V. 134, 2017, pp. 713-726. doi: 10.1016/j.conbuildmat.2016.12.16410.1016/j.conbuildmat.2016.12.164 ↗

37. Pucinotti, R., “Reinforced Concrete Structure: Non Destructive In Situ Strength Assessment of Concrete,” Construction and Building Materials, V. 75, 2015, pp. 331-341. doi: 10.1016/j.conbuildmat.2014.11.02310.1016/j.conbuildmat.2014.11.023 ↗

38. Aoki, T.; Komiyama, T.; Tanigawa, Y.; Hatanaka, S.; Yuasa, N.; Hamasaki, H.; Chiorino, M. A.; and Roccati, R., “Non-Destructive Testing of the Sanctuary of Vicoforte,” Proceedings of 13th International Brick and Block Masonry Conference, V. 4. 2004. pp. 1109-1118.

39. Maliha, M., “Estimation of Compressive Strength to Identify Low-strength Concrete with Non-Destructive Test Methods,” master’s thesis, Tohoku University, Sendai, Japan, 2020.

40. JIS A 1155, “Method of Measurement for Rebound Number on Surface of Concrete,” Japan Concrete Institute, Tokyo, Japan, 2012.

41. ISO 1920-7, “Testing of Concrete - Part 7: Non-Destructive Tests on Hardened Concrete,” International Organization for Standardization, Geneva, Switzerland, 2004.

42. Al-Hussaini, T. M.; Hossain, T. R.; and Al-Noman, M. N., “Proposed Changes to the Geotechnical Earthquake Engineering Provisions of the Bangladesh National Building Code,” Geotechnical Engineering, V. 43, No. 2, 2012, pp. 1-7.

43. Bimal, K. P., and Rejuan, H. B., “Urban Earthquake Hazard: Perceived Seismic Risk and Preparedness in Dhaka City, Bangladesh,” Disasters, V. 34, No. 2, 2010, pp. 337-359. doi: 10.1111/j.1467-7717.2009.01132.x10.1111/j.1467-7717.2009.01132.x ↗

44. Khalaf, F. M., and DeVenny, A. S., “New Tests for Porosity and Water Absorption of Fired Clay Bricks,” Journal of Materials in Civil Engineering, ASCE, V. 14, No. 4, 2002, pp. 334-337. doi: 10.1061/(ASCE)0899-1561(2002)14:4(334)10.1061/(ASCE)0899-1561(2002)14:4(334) ↗