Reliability of Non-Steady-State Electrophoretic Migration Test

1. JSCE, “Standard Specifications for Concrete Structures,” Japan Society of Civil Engineers, Tokyo, Japan, 2018.

2. Ayano, T., and Fujii, T., “Improvement of Concrete Properties using Granulated Blast Furnace Slag Sand,” Journal of Advanced Concrete Technology, V. 19, No. 2, 2021, pp. 118-132. doi: 10.3151/jact.19.11810.3151/jact.19.118 ↗

3. Minagawa, H.; Fujita, R.; Miyamoto, S.; and Hisada, M., “Fundamental Study on Improvement Mechanism of Resistance against Chloride Ion Diffusion of Mortar Using Granulated Blast Furnace Slag Fine Aggregate,” Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures), V. 75, No. 2, 2019, pp. 106-124. doi: 10.2208/jscejmcs.75.10610.2208/jscejmcs.75.106 ↗

4. Miyamoto, S.; Minagawa, H.; Hisada, M.; Inada, H.; and Hayashi, K., “Fundamental Properties of Mortar Using Cement Clinker as Fine Aggregate,” 5th International fib Congress, Melbourne, Australia, 2018.

5. JSCE-G 572-2018, “Test Method for Apparent Diffusion Coefficient of Chloride Ions in Concrete by Immersion in Salt Water,” Japan Society of Civil Engineers, Tokyo, Japan, 2018.

6. JSCE-G 571-2013, “Test Method for Effective Diffusion Coefficient of Chloride Ion In Concrete by Migration,” Japan Society of Civil Engineers, Tokyo, Japan, 2013.

7. ASTM C1202-19, “Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration,” ASTM International, West Conshohocken, PA, 2019, 8 pp.

8. NT BUILD 492, “Non-Steady State Chloride Migration (Diffusion Coefficient),” NORDTEST, Espoo, Finland, 1999.

9. Gjørv, O. E., “Durability Design and Quality Assurance of Concrete Infrastructure,” Concrete International, V. 32, No. 9, Sept. 2010, pp. 29-36.

10. Teng, S.; Divsholi, B. S.; Lim, T. Y. D.; and Gjørv, O. E., “Concrete with Very High Resistance to Chloride Ingress,” Concrete International, V. 36, No. 5, May 2014, pp. 30-36.

11. Watanabe, Y.; Kawano, H.; and Watanabe, H., “Calculation of Chloride Ion Diffusion Coefficient of Concrete by Rapid Chloride Permeability Test,” Proceedings of the Japan Concrete Institute, V. 24, No. 1, 2002, pp. 663-668.

12. Kitayama, R.; Kawano, H.; Hisada, M.; and Watanabe, H., “Understanding of Distribution State of Chloride Ion Concentration in Non-Steady State for Studying Rapid Chloride Permeability Test,” Proceedings of the Japan Concrete Institute, V. 26, No. 1, 2004, pp. 837-842.

13. Nakamura, E.; Minagawa, H.; Miyamoto, S.; Hisada, M.; Koga, H.; and Watanabe, H., “Evaluation of Resistance of Concrete to Chloride Ingress by Using Chloride Penetration Depth after Non-Steady-State Migration Experiment,” Journal of Japan Society of Civil Engineers, Ser. E2 (Materials and Concrete Structures), V. 72, No. 3, 2016, pp. 304-322.10.2208/jscejmcs.72.304 ↗

14. JSCE-G 581-2018, “Test Method for Electrical Resistivity of Concrete by Four Electrodes Method,” Japan Society of Civil Engineers, Tokyo, Japan, 2018.

15. AASHTO T 277, “Standard Method of Test for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration,” American Association of State Highway and Transportation Officials, Washington, DC, 2015.

16. Otsuki, N.; Nagataki, S.; and Nakashita, K., “Evaluation of AgNO3 Solution Spray Method for Measurement of Chloride Penetration into Hardened Cementitious Matrix Materials,” ACI Materials Journal, V. 89, No. 6, Nov.-Dec. 1992, pp. 587-592.10.14359/4036 ↗

17. Yamaguchi, T.; Kato, Y.; Minagawa, H.; Akira, Y.; Fukuyama, T.; and Yoshida, T., “Committee Report: JCI- TC162A, Technical Committee on Establishing Effective Operation and Management Techniques Using Electrochemical Techniques,” Japan Concrete Institute, Tokyo, Japan, 2018, 23 pp.

18. Minagawa, H.; Miyamoto, S.; and Hisada, M., “Relationship of Apparent Electrical Resistivity Measured by Four-Probe Method with Water Content Distribution in Concrete,” Journal of Advanced Concrete Technology, V. 15, No. 6, 2017, pp. 278-289. doi: 10.3151/jact.15.27810.3151/jact.15.278 ↗

19. Minagawa, H.; Komai, M.; Fujita, R.; Miyamoto, S.; and Hisada, M., “Numerical Calculation and Verification of Cell Constant for Electric Resistivity of Concrete Specimen measured by Four Probes Method,” Proceedings of the Concrete Structure Scenarios, The Society of Materials Science, Japan, V. 17, 2017, pp. 447-452.

20. Oshida, F., and Izumi, I., “Variation of Carbonation Depth of Concrete,” Summaries of Technical Papers of Annual Meeting of Architectural Institute of Japan, Tokyo, Japan, 1987, pp. 251-252.

21. Whiting, D., and Mitchell, T. M., “History of the Rapid Chloride Permeability Test,” Transportation Research Record: Journal of the Transportation Research Board, No. 1335, 1992, pp. 55-62.

22. Andrade, C., “Calculation of Chloride Diffusion Coefficients in Concrete from Ionic Migration Measurements,” Cement and Concrete Research, V. 23, No. 3, 1993, pp. 724-742. doi: 10.1016/0008-8846(93)90023-310.1016/0008-8846(93)90023-3 ↗

23. Sengul, O., and Gjørv, O. E., “Electrical Resistivity Measurements for Quality Control During Concrete Construction,” ACI Materials Journal, V. 105, No. 6, Nov.-Dec. 2008, pp. 541-547.10.14359/20195 ↗

24. Minagawa, H.; Hisada, M.; and Ehara, A., “Relationship between Electric Resistivity and Diffusion Coefficient of Chloride Ion in Mortar,” Concrete Under Severe Conditions: Environment and Loading: Proceedings of the 6th International Conference on Concrete Under Severe Conditions (CONSEC’10), P. Castro-Borges, ed., Mérida, Yucatán, Mexico, 2010, pp. 641-649.10.1201/b10552-78 ↗

25. AASHTO T 358, “Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration,” American Association of State Highway and Transportation Officials, Washington, DC, 2019.

26. Nakamura, E.; Mito, K.; and Koga, H., “Rapid Evaluation Method for Resistance Ability of Chloride Ion Penetration of Concrete using Blast Furnace Slag and Fly Ash,” Proceedings of the Japan Concrete Institute, V. 40, No. 1, 2018, pp. 219-224.