Three-Dimensional Printability of White Portland Cement Containing Cenospheres

1. Perkins, I., and Skitmore, M., “Three-Dimensional Printing in the Construction Industry: A Review,” International Journal of Construction Management, V. 15, No. 1, 2015, pp. 1-9. doi: 10.1080/15623599.2015.101213610.1080/15623599.2015.1012136 ↗

2. Lothenbach, B.; Scrivener, K.; and Hooton, R. D., “Supplementary Cementitious Materials,” Cement and Concrete Research, V. 41, No. 12, 2011, pp. 1244-1256. doi: 10.1016/j.cemconres.2010.12.00110.1016/j.cemconres.2010.12.001 ↗

3. Celik, K.; Meral, C.; Petek Gursel, A.; Mehta, P. K.; Horvath, A.; and Monteiro, P. J. M., “Mechanical Properties, Durability, and Life-Cycle Assessment of Self-Consolidating Concrete Mixtures Made with Blended Portland Cements Containing Fly Ash and Limestone Powder,” Cement and Concrete Composites, V. 56, 2015, pp. 59-72. doi: 10.1016/j.cemconcomp.2014.11.00310.1016/j.cemconcomp.2014.11.003 ↗

4. Celik, K.; Meral, C.; Mancio, M.; Mehta, P. K.; and Monteiro, P. J. M., “A Comparative Study of Self-Consolidating Concretes Incorporating High-Volume Natural Pozzolan or High-Volume Fly Ash,” Construction and Building Materials, V. 67, 2014, pp. 14-19. doi: 10.1016/j.conbuildmat.2013.11.06510.1016/j.conbuildmat.2013.11.065 ↗

5. Celik, K.; Hay, R.; Hargis, C. W.; and Moon, J., “Effect of Volcanic Ash Pozzolan or Limestone Replacement on Hydration of Portland Cement,” Construction and Building Materials, V. 197, 2019, pp. 803-812. doi: 10.1016/j.conbuildmat.2018.11.19310.1016/j.conbuildmat.2018.11.193 ↗

6. Celik, K.; Jackson, M. D.; Mancio, M.; Meral, C.; Emwas, A. H.; Mehta, P. K.; and Monteiro, P. J. M., “High-Volume Natural Volcanic Pozzolan and Limestone Powder as Partial Replacements for Portland Cement in Self-Compacting and Sustainable Concrete,” Cement and Concrete Composites, V. 45, 2014, pp. 136-147. doi: 10.1016/j.cemconcomp.2013.09.00310.1016/j.cemconcomp.2013.09.003 ↗

7. Rheinheimer, V.; Wu, Y.; Wu, T.; Celik, K.; Wang, J.; De Lorenzis, L.; Wriggers, P.; Zhang, M.-H.; and Monteiro, P. J. M., “Multi-Scale Study of High-Strength Low-Thermal-Conductivity Cement Composites Containing Cenospheres,” Cement and Concrete Composites, V. 80, 2017, pp. 91-103. doi: 10.1016/j.cemconcomp.2017.03.00210.1016/j.cemconcomp.2017.03.002 ↗

8. Juenger, M. C. G., and Siddique, R., “Recent Advances in Understanding the Role of Supplementary Cementitious Materials in Concrete,” Cement and Concrete Research, V. 78, 2015, pp. 71-80. doi: 10.1016/j.cemconres.2015.03.01810.1016/j.cemconres.2015.03.018 ↗

9. Elahi, A.; Basheer, P. A. M.; Nanukuttan, S. V.; and Khan, Q. U. Z., “Mechanical and Durability Properties of High Performance Concretes Containing Supplementary Cementitious Materials,” Construction and Building Materials, V. 24, No. 3, 2010, pp. 292-299. doi: 10.1016/j.conbuildmat.2009.08.04510.1016/j.conbuildmat.2009.08.045 ↗

10. McBride, S. P.; Shukla, A.; and Bose, A., “Processing and Characterization of a Lightweight Concrete Using Cenospheres,” Journal of Materials Science, V. 37, No. 19, 2002, pp. 4217-4225. doi: 10.1023/A:102005640740210.1023/A:1020056407402 ↗

11. Blanco, F.; García, P.; Mateos, P.; and Ayala, J., “Characteristics and Properties of Lightweight Concrete Manufactured with Cenospheres,” Cement and Concrete Research, V. 30, No. 11, 2000, pp. 1715-1722. doi: 10.1016/S0008-8846(00)00357-410.1016/S0008-8846(00)00357-4 ↗

12. Nerella, V. N.; Hempel, S.; and Mechtcherine, V., “Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D-Printing,” Construction and Building Materials, V. 205, 2019, pp. 586-601. doi: 10.1016/j.conbuildmat.2019.01.23510.1016/j.conbuildmat.2019.01.235 ↗

13. Sajadi, S. M.; Boul, P. J.; Thaemlitz, C.; Meiyazhagan, A. K.; Puthirath, A. B.; Tiwary, C. S.; Rahman, M. M.; and Ajayan, P. M., “Direct Ink Writing of Cement Structures Modified with Nanoscale Additive,” Advanced Engineering Materials, V. 21, No. 8, 2019, pp. 1-10. doi: 10.1002/adem.20180138010.1002/adem.201801380 ↗

14. Khalil, A.; Wang, X.; and Celik, K., “3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture,” Additive Manufacturing, V. 33, 2020, p. 101145. doi: 10.1016/j.addma.2020.10114510.1016/j.addma.2020.101145 ↗

15. Bortoluzzi, E. A.; Broon, N. J.; Bramante, C. M.; Felippe, W. T.; Tanomaru Filho, M.; and Esberard, R. M., “The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier,” Journal of Endodontics, V. 35, No. 4, 2009, pp. 550-554. doi: 10.1016/j.joen.2008.12.01810.1016/j.joen.2008.12.018 ↗

16. Torkittikul, P., and Chaipanich, A., “Optimization of Calcium Chloride Content on Bioactivity and Mechanical Properties of White Portland Cement,” Materials Science and Engineering C, V. 32, No. 2, 2012, pp. 282-289. doi: 10.1016/j.msec.2011.10.03010.1016/j.msec.2011.10.030 ↗

17. Roussel, N., “Rheological Requirements for Printable Concretes,” Cement and Concrete Research, V. 112, 2018, pp. 76-85. doi: 10.1016/j.cemconres.2018.04.00510.1016/j.cemconres.2018.04.005 ↗

18. Weng, Y.; Lu, B.; Li, M.; Liu, Z.; Tan, M. J.; and Qian, S., “Empirical Models to Predict Rheological Properties of Fiber Reinforced Cementitious Composites for 3D Printing,” Construction and Building Materials, V. 189, 2018, pp. 676-685. doi: 10.1016/j.conbuildmat.2018.09.03910.1016/j.conbuildmat.2018.09.039 ↗

19. Brown, P. W.; Harner, C. L.; and Prosen, E. J., “The Effect of Inorganic Salts on Tricalcium Silicate Hydration,” Cement and Concrete Research, V. 16, No. 1, 1986, pp. 17-22. doi: 10.1016/0008-8846(86)90063-310.1016/0008-8846(86)90063-3 ↗

20. Cheeseman, C. R., and Asavapisit, S., “Effect of Calcium Chloride on the Hydration and Leaching of Lead-Retarded Cement,” Cement and Concrete Research, V. 29, No. 6, 1999, pp. 885-892. doi: 10.1016/S0008-8846(99)00053-810.1016/S0008-8846(99)00053-8 ↗

21. Hanif, A.; Parthasarathy, P.; Ma, H.; Fan, T.; and Li, Z., “Properties Improvement of Fly Ash Cenosphere Modified Cement Pastes Using Nano Silica,” Cement and Concrete Composites, V. 81, 2017, pp. 35-48. doi: 10.1016/j.cemconcomp.2017.04.00810.1016/j.cemconcomp.2017.04.008 ↗

22. Liu, F.; Wang, J.; Qian, X.; and Hollingsworth, J., “Internal Curing of High Performance Concrete Using Cenospheres,” Cement and Concrete Research, V. 95, 2017, pp. 39-46. doi: 10.1016/j.cemconres.2017.02.02310.1016/j.cemconres.2017.02.023 ↗

23. Taylor, H. F. W., Cement Chemistry, second edition, Thomas Telford, London, UK, 1997.

24. Yuan, Q.; Li, Z.; Zhou, D.; Huang, T.; Huang, H.; Jiao, D.; and Shi, C., “A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar,” Construction and Building Materials, V. 227, 2019, p. 116600 doi: 10.1016/j.conbuildmat.2019.07.32610.1016/j.conbuildmat.2019.07.326 ↗

25. Panda, B., and Tan, M. J., “Experimental Study on Mix Proportion and Fresh Properties of Fly Ash Based Geopolymer for 3D Concrete Printing,” Ceramics International, V. 44, No. 9, 2018, pp, 10258-10265. doi: 10.1016/j.ceramint.2018.03.0310.1016/j.ceramint.2018.03.0310.1016/j.ceramint.2018.03.031 ↗

26. Panda, B.; Ruan, S.; Unluer, C.; and Tan, M. J., “Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nanoclay and Nucleation Seeds for 3D Printing,” Composites. Part B, Engineering, V. 186, 2020, p. 107826 doi: 10.1016/j.compositesb.2020.10782610.1016/j.compositesb.2020.107826 ↗

27. Chia, K.-S.; Liu, X.; Liew, J.-Y. R.; and Zhang, M.-H., “Experimental Study on Creep and Shrinkage of High-Performance Ultra Lightweight Cement Composite of 60MPa,” Structural Engineering and Mechanics, V. 50, No. 5, 2014, pp. 635-652. doi: 10.12989/sem.2014.50.5.63510.12989/sem.2014.50.5.635 ↗

28. Hanif, A.; Lu, Z.; Diao, S.; Zeng, X.; and Li, Z., “Properties Investigation of Fiber Reinforced Cement-Based Composites Incorporating Cenosphere Fillers,” Construction and Building Materials, V. 140, 2017, pp. 139-149. doi: 10.1016/j.conbuildmat.2017.02.09310.1016/j.conbuildmat.2017.02.093 ↗