Cyclic Tests on Concrete Reinforcement for Development of Seismic Bond Model

1. Verderame, G.; De Carlo, G.; Ricci, P.; and Fabbrocino, G., “Cyclic Bond Behaviour of Plain Bars, Part II: Analytical Investigation,” Construction and Building Materials, V. 23, No. 12, 2009, pp. 3512-3522. doi: 10.1016/j.conbuildmat.2009.07.00110.1016/j.conbuildmat.2009.07.001 ↗

2. Shi, Y.-C.; Li, Z.-X.; and Hao, H., “Bond Slip Modelling and its Effect on Numerical Analysis of Blast-Induced Responses of RC Columns,” Journal of Structural Engineering and Mechanics, V. 32, No. 2, 2009, pp. 251-267. doi: 10.12989/sem.2009.32.2.25110.12989/sem.2009.32.2.251 ↗

3. Monti, G.; Spacone, E.; and Filippou, F., “Analysis of Hysteretic Behavior of Anchored Reinforcing Bars,” ACI Structural Journal, V. 94, No. 3, May-June 1997, pp. 248-261.10.14359/477 ↗

4. Hawkins, N.; Lin, I.; and Ueda, T., “Beam Bar Anchorage in Exterior Column-Beam Connections,” ACI Journal Proceedings, V. 83, No. 3, May-June 1986, pp. 412-422.10.14359/10442 ↗

5. ACI Committee 318, “Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14),” American Concrete Institute, Farmington Hills, MI, 2014, 520 pp.

6. EN 1992, “Eurocode 2: Design of Concrete Structures,” European Committee for Standardization (CEN), Brussels, Belgium, 2010.

7. EN 1998, “Eurocode 8: Design of Structures for Earthquake Resistance,” European Committee for Standardization (CEN), Brussels, Belgium, 2006.

8. Mahrenholtz, C., “Seismic Bond Model for Concrete Reinforcement and the Application to Column-to-Foundation Connections,” dissertation, University of Stuttgart, Stuttgart, Germany, 2012.

9. Mahrenholtz, C.; Akguzel, U.; Eligehausen, R.; and Pampanin, S., “New Design Methodology for Seismic Column-to-Foundation Anchorage Connections,” ACI Structural Journal, V. 111, No. 5, Sept.-Oct. 2014, pp. 1179-1189. doi: 10.14359/5168696810.14359/51686968 ↗

10. Russo, G., and Pauletta, M., “Seismic Behavior of Exterior Beam-Column Connections with Plain Bars and Effects of Upgrade,” ACI Structural Journal, V. 109, No. 2, Mar.-Apr. 2012, pp. 225-234.10.14359/51683633 ↗

11. Fernandes, C.; Varum, H.; and Costa, A., “Importance of the Bond-Slip Mechanism in the Numerical Simulation of the Cyclic Response of RC Elements with Plain Reinforcing Bars,” Engineering Structures, V. 56, 2013, pp. 396-406. doi: 10.1016/j.engstruct.2013.05.01310.1016/j.engstruct.2013.05.013 ↗

12. Metelli, G.; Messali, F.; Beschi, C.; and Riva, P., “A Model for Beam-Column Corner Joints of Existing RC Frame Subjected to Cyclic Loading,” Engineering Structures, V. 89, 2015, pp. 79-92. doi: 10.1016/j.engstruct.2015.01.03810.1016/j.engstruct.2015.01.038 ↗

13. Mahrenholtz, C., and Eligehausen, R., “Simulation of Tests on Cast-in and Postinstalled Column-to-Foundation Connections to Quantify the Effect of Cyclic Loading,” Journal of Structural Engineering, ASCE, V. 142, No. 1, 2016, pp. 1-10. doi: 10.1061/(ASCE)ST.1943-541X.000133010.1061/(ASCE)ST.1943-541X.0001330 ↗

14. Ciampi, V.; Eligehausen, R.; Bertero, V.; and Popov, E., “Analytical Model for Concrete Anchorages of Reinforcing Bars under Generalized Excitations,” Report No. UCB/EERC 82-23, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, Nov. 1982.

15. Dörr, K., “Ein Beitrag zur Bemessung von Stahlbetonscheiben unter besonderer Berücksichtigung des Verbundverhaltens (A Contribution to the Design Concept for Reinforced Concrete Slab Loaded in Plane under Particular Consideration of the Bond Behavior),” dissertation, TH Darmstadt, Darmstadt, Germany, 1980. (in German)

16. Gambarova, P.; Rosati, G.; and Zasso, B., “Steel-to-Concrete Bond after Concrete Splitting: Test Results,” Materials and Structures, V. 22, No. 127, 1989, pp. 35-47.10.1007/BF02472693 ↗

17. Malvar, L., “Bond of Reinforcement under Controlled Confinement,” ACI Materials Journal, V. 89, No. 6, Nov.-Dec. 1992, pp. 593-601.10.14359/4039 ↗

18. Gambarova, P., and Rosati, G., “Bond and Splitting in Bar Pull-out: Behavioural Laws and Concrete Cover Role,” Magazine of Concrete Research, V. 49, No. 179, 1997, pp. 99-110. doi: 10.1680/macr.1997.49.179.9910.1680/macr.1997.49.179.99 ↗

19. Idda, K., “Verbundverhalten von Betonrippenstählen bei Querzug (Bond Behaviour of Deformed Reinforcing Bars Considering Transverse Tension),” dissertation, IMB, Universität Karlsruhe (TH), Karlsruhe, Germany, 1999. (in German)

20. Simons, I., “Verbundverhalten von eingemörtelten Bewehrungsstäben unter zyklischer Beanspruchung (Bond Behaviour of Post-installed Reinforcing Bars Subjected to Cyclic Loading),” dissertation, University of Stuttgart, Stuttgart, Germany, 2007. (in German)

21. Morita, S., and Kaku, T., “Local Bond Stress-Slip Relationship under Repeated Loading,” Proceedings of the IABSE Symposium on the Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, Lisbon, Portugal, 1973, pp. 1-13.

22. Viwathanatepa, S.; Popov, E.; and Bertero, V., “Effects of Generalized Loadings on Bond of Reinforced Bars Embedded in Confined Concrete Blocks,” Report No. UCB/EERC 79-22, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, Nov. 1979.

23. Hawkins, N.; Lin, I.-J.; and Jeang, F.-L., “Local Bond Strength of Concrete for Cyclic Reversed Actions,” Proceedings of Bond in Concrete, Applied Science Publishers, London, UK, 1982, pp. 151-161.

24. Eligehausen, R.; Popov, E.; and Bertero, V., “Local Bond Stress-Slip Relations of Deformed Bars under Generalized Excitations,” Report No. UCB/EERC 83-23, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, Oct. 1983.

25. Monti, G.; Spacone, E.; and Filippou, F., “Model for Anchored Reinforcing Bars under Seismic Excitations,” Report No. UCB/EERC 93-08, Earthquake Engineering Research Center, University of California, Berkeley, Berkeley, CA, Dec. 1993.

26. Mazzarolo, E.; Saetta, A.; Berto, L.; Scotta, R.; Brisedhella, B.; and Zordan, T., “Development and Validation of an Analytical Bond Model for Cyclic Excitations,” Proceedings of the Conference on Bond in Concrete (BIC), Brescia, Italy, 2012.

27. fib, “fib Model Code 2010,” Fédération Internationale du Béton, Lausanne, Switzerland, 2013.

28. Ožbolt, J.; Lettow, S.; and Kozar, I., “Discrete Bond Element for 3D Finite Element Analysis of Reinforced Concrete Structures,” Proceedings of Bond in Concrete – From Research to Standards, University of Technology and Economics, Budapest, Hungary, 2002.

29. Eligehausen, R.; Lettow, S.; Ožbolt, J.; and Mayer, U., “Bond of RC Members Using Nonlinear 3D FE Analysis,” Proceedings of the Conference on Fracture Mechanics of Concrete Structures (FraMCoS 5), V. 2, Vail, CO, 2003.

30. Simons, I., and Eligehausen, R., “Tragverhalten und Bemessung von Bewehrungsstäben unter zyklischer Beanspruchung im ungerissenen und gerissenen Beton (Behavior and Design of Post-Installed Reinforcing Bars under Cyclic Loading Post-Installed in Uncracked and Cracked Concrete),” Beton- und Stahlbetonbau, V, 103, Heft 9, 2008, pp. 598-608. (in German)10.1002/best.200800635 ↗

31. ASTM E488/E488-15, “Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements,” ASTM International, West Conshohocken, PA, 2015, 20 pp.

32. Mahrenholtz, C., and Sharma, A., “Testing of Anchors and Reinforcing Bars in Concrete under Cyclic Crack Movements,” Journal of Testing and Evaluation, V. 45, No. 4, July 2017, doi: 10.1520/JTE2016008210.1520/JTE20160082 ↗

33. Lowes, L.; Moehle, J.; and Govindjee, S., “Concrete-Steel Bond Model for Use in Finite Element Modeling of Reinforced Concrete Structures,” ACI Structural Journal, V. 101, No. 4, July-Aug. 2004, pp. 501-511.10.14359/13336 ↗

34. Gambarova, P., and Rosati, G., “Bond and Splitting in Reinforced Concrete: Test Results on Bar Pull-out,” Materials and Structures, V. 29, No. 5, 1996, pp. 267-276. doi: 10.1007/BF0248636110.1007/BF02486361 ↗

35. Hoehler, M., and Eligehausen, R., “Behavior and Testing of Anchors in Simulated Seismic Cracks,” ACI Structural Journal, V. 105, No. 3, May-June 2008, pp. 348-357.10.14359/19794 ↗