Gas Nitriding and the Influence of Temperature and Exposure Time on the Electrochemical Corrosion Behavior of Titanium Grade 2 in Hydrochloric Acid
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Z. Pan, Y. Wei, Y. Fu, H. Luo, and X. Li, Effect of Electrochemical Hydrogen Charging on the Mechanical Property and Corrosion Behavior of Ti-3Mo Alloy, Corros. Sci., 2022, 200, p 110219. https://doi.org/10.1016/j.corsci.2022.11021910.1016/j.corsci.2022.110219 ↗
2. C.V. Ajay, S. Elangovan, and C.T.J. Panicker, Studies on Single Point Incremental Forming of Ti-6Al-4V Alloy for Aerospace Applications, Mater. Today Proc., 2020, 22, p 1967–1976. https://doi.org/10.1016/j.matpr.2020.03.16210.1016/j.matpr.2020.03.162 ↗
3. R. Sabban, S. Bahl, K. Chatterjee, and S. Suwas, Globularization Using Heat Treatment in Additively Manufactured Ti-6Al-4V for High Strength and Toughness, Acta Mater., 2019, 162, p 239–254. https://doi.org/10.1016/j.actamat.2018.09.06410.1016/j.actamat.2018.09.064 ↗
4. B. Wu, Z. Pan, S. Li, D. Cuiuri, D. Ding, and H. Li, The Anisotropic Corrosion Behaviour of Wire Arc Additive Manufactured Ti-6Al 4V Alloy in 3.5% NaCl Solution, Corros. Sci., 2018, 137, p 176–183. https://doi.org/10.1016/j.corsci.2018.03.04710.1016/j.corsci.2018.03.047 ↗
5. S. Ren, C. Du, Z. Liu, X. Li, J. Xiong, and S. Li, Effect of Fluoride Ions on Corrosion Behaviour of Commercial Pure Titanium in Artificial Seawater Environment, Appl. Surf. Sci., 2020, 506, 144759. https://doi.org/10.1016/j.apsusc.2019.14475910.1016/j.apsusc.2019.144759 ↗
6. A. Shi, D. Cai, J. Hu, X. Zhao, G. Qin, Y. Han, and E. Zhang, Development of a Low Elastic Modulus and Antibacterial Ti-13Nb 13Zr-5Cu Titanium Alloy by Microstructure Controlling, Mater. Sci. Eng. C, 2021, 126, 112116. https://doi.org/10.1016/j.msec.2021.11211610.1016/j.msec.2021.112116 ↗
7. A.A. Patil and R.M. Chanmanwar, Experimental Investigation of Angular Error During Taper Cutting of Titanium (ASTM Grade 2) Using WEDM Process, Mater. Today Proc., 2022, 59, p 379–386. https://doi.org/10.1016/j.matpr.2021.11.35110.1016/j.matpr.2021.11.351 ↗
8. I.N. Andijani, S. Ahmad, and A.U. Malik, Corrosion Behavior of Titanium Metal in the Presence of Inhibited Sulfuric Acid at 50 °C, Desalination, 2000, 129, p 45–51. https://doi.org/10.1016/S0011-9164(00)00050-310.1016/S0011-9164(00)00050-3 ↗
9. H. Richaud-minier, H. Marchebois, and P. Gerard, Titanium and Super Stainless Steel Welded Tubing Solutions for Sea Water Cooled Heat Exchangers, Mater. Technol., 2009, 24, p 191–200. https://doi.org/10.1179/106678509X1247588394942210.1179/106678509X12475883949422 ↗
10. Q. Sun, J. Sun, J. Han, and G. Wu, Corrosion Behavior in Hydrochloric Acid of Pure Titanium after Ultrasonic Severe Surface Rolling, Metals, 2022, 12, p 1951. https://doi.org/10.3390/met1211195110.3390/met12111951 ↗
11. F.B. Mainier, L.P.C. Monteiro, S.S.M. Tavares, F.R. Leta, and J.M. Pardal, Evaluation of Titanium in Hydrochloric acid Solutions Containing Corrosion Inhibitors, IOSR-JMCE, 2013, 10, p 66–69.10.9790/1684-1016669 ↗
12. F.B. Mainier, H.N. Farneze, L.F. Serrão, B.T. de Oliveira, and B.F. Nani, Performance of Stainless Steel AISI 317L in Hydrochloric Acid with the Addition of Propargyl Alcohol, Int. J. Electrochem. Sci., 2018, 13, p 3372–3381. https://doi.org/10.20964/2018.04.0210.20964/2018.04.02 ↗
13. A. Rahimi, M. Abdouss, A. Farhadian, L. Guo, and J. Neshati, Development of a Novel Thermally Stable Inhibitor Based on Furfuryl Alcohol for Mild Steel Corrosion in a 15% HCl Medium for Acidizing Application, Ind. Eng. Chem. Res., 2021, 60, p 11030–11044. https://doi.org/10.1021/acs.iecr.1c0194610.1021/acs.iecr.1c01946 ↗
14. I.B. Obot, A. Meroufel, I.B. Onyeachu, A. Alenazi, and A.A. Sorour, Corrosion Inhibitors for Acid Cleaning of Desalination Heat Exchangers: Progress, Challenges and Future Perspectives, J. Mol. Liq., 2019, 296, 111760. https://doi.org/10.1016/j.molliq.2019.11176010.1016/j.molliq.2019.111760 ↗
15. K. Shliakhetka, I. Pohrelyuk, H. Chumalo, R. Proskurnyak, S. Lavrys, and H. Veselivska, Influence of Concentration of Sulfuric and Hydrochloric Acids on Corrosion Resistance of Porous Titanium, J. Mater. Sci., 2023, 58, p 15047–15060. https://doi.org/10.1007/s10853-023-08964-910.1007/s10853-023-08964-9 ↗
16. R. Fan, W. Zhang, Y. Wang, D. Chen, and Y. Zhang, Metal Material Resistant to Hydrochloric Acid Corrosion, J. Phys. Conf., 2021, 1732, 012134. https://doi.org/10.1088/1742-6596/1732/1/01213410.1088/1742-6596/1732/1/012134 ↗
17. Y. Wei, Z. Pan, Y. Fu, W. Yu, S. He, Q. Yuan, H. Luo, and X. Li, Effect of Annealing Temperatures on Microstructural Evolution and Corrosion Behavior of Ti-Mo Titanium Alloy in Hydrochloric Acid, Corros. Sci., 2022, 197, 110079. https://doi.org/10.1016/j.corsci.2021.11007910.1016/j.corsci.2021.110079 ↗
18. S. Guo, D. Xu, G. Jiang, and W. Kuang, Corrosion Behavior and Mechanism of Ni-BASED ALLOYS HASTELLOY C2000 and Inconel 740 in Chloride 115 Containing Supercritical Water Oxidation, J. Alloys Compd., 2022, 907, 164452. https://doi.org/10.1016/j.jallcom.2022.16445210.1016/j.jallcom.2022.164452 ↗
19. B. Su, B. Wang, L. Luo, L. Wang, Y. Su, F. Wang, Y. Xu, B. Han, H. Huang, J. Guo, and H. Fu, The Corrosion Behavior of Ti-6Al-3Nb-2Zr-1Mo Alloy: Effects of HCl Concentration and Temperature, J. Mater. Sci. Technol., 2021, 74, p 143–154. https://doi.org/10.1016/j.jmst.2020.08.06610.1016/j.jmst.2020.08.066 ↗
20. A.T. Tabrizi and H. Aghajani, Study Through Diverse Synthesis Methods of Chromium Nitride Thin Layers: A Review, J. Surf. Investig., 2021, 15, p 1217–1224. https://doi.org/10.1134/S102745102106019710.1134/S1027451021060197 ↗
21. X. Zhao, H. Liu, S. Li, X. Wang, Y. Sheng, P. Zhang, and W. Li, Combined Effect of TiN coaTing and Surface Texture on Corrosion-Wear Behavior of Selective Laser Melted CP-Titanium in Simulated Body Fluid, J. Alloys Compd., 2020, 816, 152667. https://doi.org/10.1016/j.jallcom.2019.15266710.1016/j.jallcom.2019.152667 ↗
22. I.M. Pohrelyuk, V.M. Fedirko, O.V. Tkachuk, and R.V. Proskurnyak, Corrosion Resistance of Ti–6Al–4V Alloy with Nitride Coatings in Ringer’s Solution, Corros. Sci., 2013, 66, p 392–398. https://doi.org/10.1016/j.corsci.2012.10.00510.1016/j.corsci.2012.10.005 ↗
23. W.H. Kao, Y.L. Su, J.H. Horng, H.C. Huang, and S.E. Yang, Improved Tribological, Electrochemical and Biocompatibility Properties of Ti6Al4V Alloy by Gas-Nitriding and Ti–C: H Coating, Surf. Coat. Technol., 2015, 283, p 70–79. https://doi.org/10.1016/j.surfcoat.2015.10.03510.1016/j.surfcoat.2015.10.035 ↗
24. J. Grabarczyk, D. Batory, W. Kaczorowski, B. Pązik, B. Januszewicz, B. Burnat, M. Czerniak-Reczulska, M. Makówka, and P. Niedzielski, Comparison of Different Thermo-Chemical Treatments Methods of Ti-6Al-4V Alloy in Terms of Tribological and Corrosion Properties, Materials, 2020, 13, p 5192. https://doi.org/10.3390/ma1322519210.3390/ma13225192 ↗
25. V.M. Fedirko, O.I. Yas’kiv, and I.M. Pohrelyuk, Influence of Parameters of Nitrided Layers on Corrosion Resistance of Titanium Alloys in Solutions of Acids, Mater. Sci., 1999, 35, p 883–887. https://doi.org/10.1007/BF0235947310.1007/BF02359473 ↗
26. I.M. Pohrelyuk, V.M. Fedirko, and O.V. Tkachuk, Corrosion Resistance of Titanium Alloys with Oxynitride Coatings in Concentrated Inorganic Acids, Mater. Sci., 2014, 50, p 269–276. https://doi.org/10.1007/s11003-014-9717-410.1007/s11003-014-9717-4 ↗
27. E. Galvanetto, F.P. Galliano, A. Fossati, and F. Borgioli, Corrosion Resistance Properties of Plasma Nitrided Ti–6Al–4V Alloy in Hydrochloric Acid Solutions, Corros. Sci., 2002, 44, p 1593–1606. https://doi.org/10.1016/S0010-938X(01)00157-310.1016/S0010-938X(01)00157-3 ↗
28. S. Rossi, L. Fedrizzi, T. Bacci, and G. Pradelli, Corrosion Behaviour of Glow Discharge Nitrided Titanium Alloys, Corros. Sci., 2003, 45, p 511–529. https://doi.org/10.1016/S0010-938X(02)00139-710.1016/S0010-938X(02)00139-7 ↗
29. H.H. Okhota, O.S. Kalakhan, and H.V. Pokhmurs’ka, Influence of the Ion Implantation of Nitrogen and Boron and TiN Coatings on the Corrosion of VT-6 Titanium Alloy, Mater. Sci., 2008, 44, p 405–412. https://doi.org/10.1007/s11003-008-9100-410.1007/s11003-008-9100-4 ↗
30. R.S. Razavi, M. Salehi, M. Monirvaghefi, and R. Mozafarinia, Effect of Laser Gas Nitriding on the Microstructure and Corrosion Properties of Ti–6Al–4V Alloy, ISIJ Int., 2007, 47, p 709–714. https://doi.org/10.2355/isijinternational.47.70910.2355/isijinternational.47.709 ↗
31. R.S. Razavi, M. Salehi, M. Ramazani, and H.C. Man, Corrosion Behaviour of Laser Gas Nitrided Ti–6Al–4V in HCl Solution, Corros. Sci., 2009, 51, p 2324–2329. https://doi.org/10.1016/j.corsci.2009.06.01610.1016/j.corsci.2009.06.016 ↗
32. V.M.C.A. Oliveira, C. Aguiar, A.M. Vazquez, A. Robin, and M.J.R. Barboza, Improving Corrosion Resistance of Ti–6Al–4V Alloy Through Plasma-Assisted PVD Deposited Nitride Coatings, Corros. Sci., 2014, 88, p 317–327. https://doi.org/10.1016/j.corsci.2014.07.04710.1016/j.corsci.2014.07.047 ↗
33. A. Scerri, J. Buhagiar, S. Banfield, J.C.A. Wilson, J. Housden, A. Leyland, A. Matthews, and G. Cassar, Corrosion Behaviour of Triode Plasma Diffusion Treated and PVD TiN-Coated Ti–6Al–4V in Acidified Aqueous Chloride Environments, Surf. Coat. Technol., 2015, 280, p 185–193. https://doi.org/10.1016/j.surfcoat.2015.08.04010.1016/j.surfcoat.2015.08.040 ↗
34. J.W. Lv, X.Y. Ai, and B. Zhang, Hydrogen-Free Plasma Nitriding to Enhance Wear and Corrosion Resistance of TiZrAlV Alloy, J. Mater. Eng. Perform., 2024, 33, p 54–63. https://doi.org/10.1007/s11665-023-08151-610.1007/s11665-023-08151-6 ↗
35. X.J. Jiang, Y.G. Meng, Q.X. Ran, J.H. Yang, and G.W. Sun, Corrosion Resistance Improvement of Commercial Pure Titanium Via Compression Deformation Induced Substructure, Corros. Sci., 2024, 229, 111891. https://doi.org/10.1016/j.corsci.2024.11189110.1016/j.corsci.2024.111891 ↗
36. B.K.G. Fiel, Estudo da Influência do Tempo e da Temperatura na Nitretação do Titânio Grau 2 (Study of the influence of time and temperature on the nitriding of titanium grade 2), Monography, 2016, Universidade de São Paulo (in Portuguese)
37. K.M.S. Palma, Estudo do Efeito da Nitretação na Resistência à Fluência do Titânio Grau 2, Dissertation (Study of the effect of nitriding on the creep resistance of titanium grade 2), 2016, Universidade de São Paulo (in Portuguese)
38. K.M.S. Palma, G.B. Perina, V.M.O. Velloso, C.A.R.P. Baptista, and M.J.R. Barboza, Gas Nitriding Influence on Fatigue and Creep Behaviors in Titanium Grade 2, MATEC Web Conf., 2020, 321, p 11095. https://doi.org/10.1051/matecconf/20203211109510.1051/matecconf/202032111095 ↗
39. F.D. Fernandes, V.M. de Oliveira Velloso, B. Ferreira, R. Landers, G.V. Martins, and M.J. Barboza, Enhanced Tribological Behavior of Titanium Grade 2 through Gas Nitriding: Process, Characterization and Performance Evaluation, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-10426-510.1007/s11665-024-10426-5 ↗
40. B.W. Darvell, Chapter 13 – Corrosion, in Woodhead Publishing Series in Biomaterials, Materials Science for Dentistry, 10th ed. Woodhead Publishing, New Delhi, 2018, p 382–398. https://doi.org/10.1016/B978-0-08-101035-8.50013-410.1016/B978-0-08-101035-8.50013-4 ↗
41. L. Casanova, M. Gruarin, M. Pedeferri, and M. Ormellese, A Comparison Between Corrosion Performances of Titanium Grade 2 and 7 in Strong Reducing Acids, Mater. Corros., 2021, 72, p 1506–1517. https://doi.org/10.1002/maco.20211239210.1002/maco.202112392 ↗
42. K. Kakaei, M.D. Esrafili, and A. Ehsani, Chapter 8 - Graphene and Anticorrosive Properties, Interface Sci. Technol., 2019, 27, p 303–337. https://doi.org/10.1016/B978-0-12-814523-4.00008-310.1016/B978-0-12-814523-4.00008-3 ↗
43. M.C. Biesinger, L.W. Lau, A.R. Gerson, and R.S. Smart, Resolving Surface Chemical States in XPS Analysis of First Row Transition Metals, Oxides and Hydroxides: Sc, Ti, V, Cu and Zn, Appl. Surf. Sci., 2010, 257, p 887–898. https://doi.org/10.1016/j.apsusc.2010.07.08610.1016/j.apsusc.2010.07.086 ↗
44. W. Sha, A.M.F.P.H. Ali, and X. Wu, Gas Nitriding of Titanium Alloy TIMETAL 205, Surf. Coat. Technol., 2008, 202, p 5832–5837. https://doi.org/10.1016/j.surfcoat.2008.06.15510.1016/j.surfcoat.2008.06.155 ↗
45. X. Zong, H. Wang, H. Tang, X. Cheng, X. Tian, and X. Ran, Microstructure Evolution and Mass Transfer Behavior During Multi-Pass Laser Surface Nitriding Process on Titanium Alloy, Surf. Coat. Technol., 2023, 466, 129565. https://doi.org/10.1016/j.surfcoat.2023.12956510.1016/j.surfcoat.2023.129565 ↗
46. H. Gruber and E. Krautz, Magnetoresistance and Conductivity in the Binary System Titanium-Oxygen. I. Titanium Oxides with Metallic Conductivity Phys, Status Solidi A, 1982, 69, p 287–295. https://doi.org/10.1002/pssa.221069012810.1002/pssa.2210690128 ↗
47. H. Li, Z. Cui, Z. Li, S. Zhu, and X. Yang, Surface Modification by Gas Nitriding for Improving Cavitation Erosion Resistance of CP Ti, Appl. Surf. Sci., 2014, 298, p 164–170. https://doi.org/10.1016/j.apsusc.2014.01.15210.1016/j.apsusc.2014.01.152 ↗
48. M. Han, J. Im, M. Hwang, B. Kim, H.Y. Kim and Y. Park, Effect of Indium Content on the Microstructure, Mech. Prop. Corro. Behav. Titan. Alloys, Metals, 2015, 5, p 850–862. https://doi.org/10.3390/met502085010.3390/met5020850 ↗
49. F. Mindivan, H. Mindivan, and C. Darcan, Electroless Ni–B Coating of Pure Titanium Surface for Enhanced Tribocorrosion Performance in Artificial Saliva and Antibacterial Activity, Tribol. Ind., 2017, 39, p 270–276. https://doi.org/10.24874/TI.2017.39.02.1510.24874/TI.2017.39.02.15 ↗
50. G. Lobier and J.P. Marcon, Etude et structure d’une nouvelle phase du sous-nitrure de titane Ti2N, C, R. Seances Acad. Sci. (Ser. C), 1969, 268, p 268–1132.
51. B. Huneau, J.J. Ding, R. Peter, J. Bauer, X.Y. Ding, and M. Bohn, Experimental Investigation in the Quaternary Systems Ti-Ni-Al-N and Ti-Ni-Al-O, J. Solid State Chem., 2000, 155, p 71–77. https://doi.org/10.1006/jssc.2000.889310.1006/jssc.2000.8893 ↗
52. M. Mohammadi, A. Akbari, F. Warchomicka, and L. Pichon, Depth Profiling Characterization of the Nitride Layers on Gas Nitrided Commercially Pure TitaniuM, Mater Charact, 2021, 181, 111453. https://doi.org/10.1016/j.matchar.2021.11145310.1016/j.matchar.2021.111453 ↗
53. Y. Hida, E. Chaieb, A. Derkaoui, A. Tahanic, and L. Elfarhc, Pure Titanium Corrosion Inhibition by Heat Treatment in 3 M HCl Solution: An Electrochemical Impedance Spectroscopy (EIS) Study, Mater. Today: Proc., 2019, 13, p 899–908. https://doi.org/10.1016/j.matpr.2019.04.05410.1016/j.matpr.2019.04.054 ↗
54. S. Chen, D. Tubul, A. Venkert, and D. Rittel, The Effect of Heat Treatment on the Mechanical Behavior of Commercially Pure Titanium and Zirconium Under Quasi-static and Dynamic Loading, Metall. Mater. Trans. A, 2022, 53A, p 900–914. https://doi.org/10.1007/s11661-021-06562-510.1007/s11661-021-06562-5 ↗
55. X. Sun, H. Song, and Y.L. Luo, Depth Profiling Analysis of the Nitriding Layer Formed by Gas Nitriding of Ti13Nb13Zr Alloy, Mater. Res. Express, 2023, 10, 115402. https://doi.org/10.1088/2053-1591/ad0b5710.1088/2053-1591/ad0b57 ↗
56. A. Zhecheva, W. Sha, S. Malinov, and A. Long, Enhancing the Microstructure and Properties of Titanium Alloys Through Nitriding and Other Surface Engineering Methods, Surf. Coat. Technol., 2005, 200, p 2192–2207. https://doi.org/10.1016/j.surfcoat.2004.07.11510.1016/j.surfcoat.2004.07.115 ↗
57. M.C. Rossi, P.A.B. Kuroda, L.S. de Almeida, L.S. Rossino, and C.R.M. Afonso, A Detailed Analysis of the Structural, Morphological Characteristics and Micro-Abrasive Wear Behavior of Nitrided Layer Produced in α (CP–Ti), α+β (Ti–6Al–4V), and β (TNZ33) Type Ti Alloys, J. Mater. Res. Technol, 2023, 27, p 2399–2412. https://doi.org/10.1016/j.jmrt.2023.10.10910.1016/j.jmrt.2023.10.109 ↗
58. M.S. Oskooie, M.S. Motlagh, and H. Aghajani, Surface Properties and Mechanism of Corrosion Resistance Enhancement in a High Temperature Nitrogen Ion Implanted Medical Grade Ti, Surf. Coat. Technol., 2016, 291, p 356–364. https://doi.org/10.1016/j.surfcoat.2016.02.03210.1016/j.surfcoat.2016.02.032 ↗
59. S. Wolynec, Técnicas eletroquímicas em corrosão, Edusp, 2003.
60. X. Zhao, D. Yan, S. Li and C. Lu, The Effect of Heat Treatment on the Electrochemical Corrosion Behavior of Reactive Plasma-Sprayed TiN Coatings, Appl. Surf. Sci., 2011, 257, p 10078–10083. https://doi.org/10.1016/j.apsusc.2011.06.14310.1016/j.apsusc.2011.06.143 ↗
61. J. J. Bodner, Dissolution of titanium in hydrochloric acid, These, 1964, University of Windsor, (in English)
62. W.B. Utomo and S.W. Donne, Electrochemical Behaviour of Titanium in H2SO4-MnSO4 Electrolytes, Electrochim. Acta, 2006, 51, p 3338–3345. https://doi.org/10.1016/j.electacta.2005.09.03110.1016/j.electacta.2005.09.031 ↗
63. Z.B. Wang, H.X. Hu, and Y.G. Zheng, Determination and Explanation of the pH-Related Critical Fluoride Concentration of Pure Titanium in Acidic Solutions Using Electrochemical Methods, Electrochim. Acta, 2015, 170, p 300–310. https://doi.org/10.1016/j.electacta.2015.04.16510.1016/j.electacta.2015.04.165 ↗
64. D.N. Travessa, G.V. Guedes, A.C. de Oliveira, A.S. da Silva Sobrinho, V. Roche, and A.M. Jorge, Corrosion Performance of the Biocompatible β-Ti12Mo6Zr2Fe Alloy Submitted to Laser and Plasma-Nitriding Surface Modifications, Corros. Sci., 2022, 209, p 110740. https://doi.org/10.1016/j.corsci.2022.11074010.1016/j.corsci.2022.110740 ↗
65. D.B. Wei, X.H. Chen, P.Z. Zhang, F. Ding, F.K. Li, and Z.J. Yao, Plasma Surface Tantalum Alloying on Titanium and its Corrosion Behavior in Sulfuric Acid and Hydrochloric Acid, Appl. Surf. Sci., 2018, 441, p 448–457. https://doi.org/10.1016/j.apsusc.2018.02.05810.1016/j.apsusc.2018.02.058 ↗
66. Z.B. Wang, H.X. Hu, Y.G. Zheng, W. Ke, and Y.X. Quiao, Comparison of the Corrosion Behavior of Pure Titanium and its Alloys in Fluoride-Containing Sulfuric Acid, Corros. Sci., 2016, 103, p 50–65. https://doi.org/10.1016/j.corsci.2015.11.00310.1016/j.corsci.2015.11.003 ↗
67. T. Fu, Z. Zhan, L. Zhang, Y. Yang, Z. Lui, J. Liu, L. Li, and X. Yu, Effect of Surface Mechanical Attrition Treatment on Corrosion Resistance of Commercial Pure Titanium, Surf. Coat. Technol., 2015, 280, p 129–135. https://doi.org/10.1016/j.surfcoat.2015.08.04110.1016/j.surfcoat.2015.08.041 ↗
68. J.J. Noel, N. Ebrahimi, and D.W. Shoesmith, Corrosion of Titanium and Titanium Alloys, Encycl. Interfacial Chem., 2018 https://doi.org/10.1016/B978-0-12-409547-2.13834-X10.1016/B978-0-12-409547-2.13834-X ↗
69. X. Zhong, S. Yu, J. Hu, L. Chen, Y. Shi, Z. Zhang, S. Gao, D. Zeng, and T. Shi, Corrosion Electrochemical 133 Behaviors of Titanium in HCl acidizing Fluid Used in Natural Gas Exploitation, Int. J. Electrochem. Sci., 2017, 12, p 2875–2892. https://doi.org/10.20964/2017.04.2610.20964/2017.04.26 ↗
70. J. Hu, L. Chen, X. Zhong, S. Yu, Z. Zhang, D. Zeng, and T. Shi, Corrosion Inhibition of Titanium in Hydrochloric Acid containing Na2MoO4, Int. J. Electrochem. Sci., 2017, 12, p 8878–8891. https://doi.org/10.20964/2017.10.1610.20964/2017.10.16 ↗
71. M.O.H. Bodunrin, L.H. Chown, J.W.K. Merwe, K.K. Alaneme, C. Oganbule, E.P. Desmond, D.E.P. Klenam, and N.P. Mpahasha, Corrosion Behavior of Titanium Alloys in Acidic and Saline Media: Role of Alloy Design, Passivation Integrity, and Electrolyte Modification, Corros. Rev., 2020, 38, p 2–23. https://doi.org/10.1515/corrrev-2019-002910.1515/corrrev-2019-0029 ↗
72. X.H. Chen, P.Z. Zhang, D.B. Wei, J. Huang, and W. Xuan, Surface Modification of Pure Titanium by Plasma Tantalumising, Surf. Eng., 2013 https://doi.org/10.1179/1743294412Y.000000010710.1179/1743294412Y.0000000107 ↗
73. R.F. Sandenbergh and V.D. Lingen, The Use of Tafel Back Extrapolation to Clarify the Influence of Ruthenium and Palladium Alloying on the Corrosion Behaviour of Titanium in Concentrated Hydrochloric Acid, Corros. Sci., 2005, 47, p 3300–3311. https://doi.org/10.1016/j.corsci.2005.05.05610.1016/j.corsci.2005.05.056 ↗
74. I. Pana, V. Braic, M. Dinu, E.S.M. Mouele, A.C. Parau, L.F. Petrik, and M. Braic, In Vitro Corrosion of Titanium Nitride and Oxynitride-Based Biocompatible Coatings Deposited on Stainless Steel, Coatings, 2020, 10, p 710. https://doi.org/10.3390/coatings1008071010.3390/coatings10080710 ↗
75. A. Ghailane, A.O. Oluwatosin, H. Larhlimi, C. Hejjaj, M. Makha, H. Busch, C.B. Fischer, and J. Alami, Titanium Nitride, TiXN(1−X), Coatings Deposited by HiPIMS for Corrosion Resistance and Wear Protection Properties, Appl. Surf. Sci., 2022, 574, 151635. https://doi.org/10.1016/j.apsusc.2021.15163510.1016/j.apsusc.2021.151635 ↗
76. A. Badr, H. Aghajani, and O. Abbaszadeh, Evaluation of Microstructure, Corrosion, and Surface Properties of Plasma-Assisted Oxy-Nitrided Ti–6Al–4V Alloy, J Bio Tribo Corros., 2024 https://doi.org/10.1007/s40735-024-00832-610.1007/s40735-024-00832-6 ↗
77. H. Parangusan, J. Bhadra, and N. Al-thani, A Review of Passivity Breakdown on Metal Surfaces: Influence of Chloride- and Sulfide-Ion Concentrations, Temperature, and pH, Emerg. Mater., 2021, 4, p 1187–1203. https://doi.org/10.1007/s42247-021-00194-610.1007/s42247-021-00194-6 ↗
78. K.V. Akpanyung and R.T. Loto, Pitting Corrosion Evaluation: A Review, J. Phys.: Conf., 2019 https://doi.org/10.1088/1742-6596/1378/2/02208810.1088/1742-6596/1378/2/022088 ↗
79. M. Gojić, L. Vrsalović, S. Kožuh, D. Ćubela, and S. Gudić, Microstructure and Corrosion Properties Ni-Ti Alloy After Electrochemical Testing in 0.9 % NaCl Solution, Microstruct. Corro. Prop. Ni-Ti Alloy, 2012, 53, p 345.
80. H. Li, Z. Cui, Z. Li, S. Zhu, and X. Yang, Effect of Gas Nitriding Treatment on Cavitation Erosion Behavior of Commercially Pure Ti and Ti−6Al−4V Alloy, Surf. Coat. Technol., 2013, 221, p 29–36. https://doi.org/10.1016/j.surfcoat.2013.01.02310.1016/j.surfcoat.2013.01.023 ↗
81. I.M. Pohrelyuk, S.M. Lavrys, O.M. Sakharuk, I.V. Stasyshyn, and O.V. Penkovyi, Pretreatment Influence on Titanium Surface Properties After Gas Nitriding, J. Mater. Eng. Perform., 2017, 26, p 5072–5078. https://doi.org/10.1007/s11665-017-2934-x10.1007/s11665-017-2934-x ↗
82. H.L. Yakel, Thermocrystallography of Higher Hydrides of Titanium and Zirconium, Acta Crystallogr., 1958, 11, p 46–51. https://doi.org/10.1107/S0365110X5800009810.1107/S0365110X58000098 ↗
83. T.P. Feist and P.K. Davies, The Soft Chemical Synyhesis of TiO2 (B) from Layered Titanates, J. Solid State Chem., 1992, 101, p 275–295. https://doi.org/10.1016/0022-4596(92)90184-W10.1016/0022-4596(92)90184-W ↗
84. Y. Li, L. Qu, and F. Wang, The Electrochemical Corrosion Behavior of TiN and (Ti, Al)N Coatings in Acid and Salt Solution, Corros. Sci., 2003, 45, p 1367–1381. https://doi.org/10.1016/S0010-938X(02)00223-810.1016/S0010-938X(02)00223-8 ↗
85. NIST X-ray Photoelectron Spectroscopy Database, NIST Standard Reference Database 20. https://srdata.nist.gov/xps
86. L. Zhang, M. Shao, Z. Wang, Z. Zhang, Y. He, J. Yan, J. Lu, J. Qiu, and Y. Li, Comparison of Tribological Properties of Nitrided Ti-N Modified Layer and Deposited TiN Coatings on TA2 Pure Titanium, Tribol. Int., 2022, 174, 107712. https://doi.org/10.1016/j.triboint.2022.10771210.1016/j.triboint.2022.107712 ↗
87. J. Pouilleau, D. Devilliers, F. Garrido, S. Durand-Vidal, and E. Mahé, Structure and Composition of Passive Titanium Oxide Films, J. mater. sci. eng., 1997, 47, p 235–243. https://doi.org/10.1016/S0921-5107(97)00043-310.1016/S0921-5107(97)00043-3 ↗
88. E. McCafferty and J.P. Wightman, An X-ray Photoelectron Spectroscopy Sputter Profile Study of the Native Air-Formed Oxide Film on Titanium, Appl. Surf. Sci., 1999, 143, p 92–100. https://doi.org/10.1016/S0169-4332(98)00927-110.1016/S0169-4332(98)00927-1 ↗
89. M.F. López, J.A. Jiménez, and A. Gutiérrez, XPS Characterization of Surface Modified Titanium Alloys for Use as Biomaterials, Vacuum, 2011, 85, p 1076–1079. https://doi.org/10.1016/j.vacuum.2011.03.00610.1016/j.vacuum.2011.03.006 ↗
90. S.N. Nesov, V.S. Kovivchak, and A.M. Badamshin, Formation of Chemical Compounds in the Surface Layers of Titanium Under the Action of a High-Power Ion Beam of Nanosecond Duration, Nucl. Instrum. Methods Phys. Res. B: Beam Interact. Mater. Atoms, 2022, 531, p 74–81. https://doi.org/10.1016/j.nimb.2022.09.02510.1016/j.nimb.2022.09.025 ↗
91. J. Lausmaa and B. Kasemo, Surface Spectroscopic Characterization of Titanium Implant Materials, Appl. Surf. Sci., 1990, 44, p 133–146. https://doi.org/10.1016/0169-4332(90)90100-E10.1016/0169-4332(90)90100-E ↗
92. I. Milošev, M. Metikoš-Huković, and H.-H. Strehblow, Passive Film on Orthopaedic TiAlV Alloy Formed In Physiological Solution Investigated by X-ray Photoelectron Spectroscopy, Biomaterials, 2000, 21, p 2103–2113. https://doi.org/10.1016/S0142-9612(00)00145-910.1016/S0142-9612(00)00145-9 ↗
93. Y. Tsutsumi, D. Nishimura, H. Doi, N. Nomura, and T. Hanawa, Difference in Surface Reactions Between Titanium and Zirconium in Hanks’ Solution to Elucidate Mechanism of Calcium Phosphate Formation on Titanium Using XPS and Cathodic Polarization, Mater. Sci. Eng. C, 2009, 29, p 1702–1708. https://doi.org/10.1016/j.msec.2009.01.01610.1016/j.msec.2009.01.016 ↗
94. Y. Oshida, 4 - Oxidation and Oxides, Biosci. Bioeng. Titan. Mater., 2013 https://doi.org/10.1016/B978-0-444-62625-7.00004-210.1016/B978-0-444-62625-7.00004-2 ↗
95. H. Zhao, L. Xie, C. Xin, N. Li, B. Zhao, and L. Li, Effect of Molybdenum Content on Corrosion Resistance and Corrosion Behavior of Ti-Mo Titanium Alloy in Hydrochloric Acid, Mater. Today Commun., 2023, 34, 105032. https://doi.org/10.1016/j.mtcomm.2022.10503210.1016/j.mtcomm.2022.105032 ↗
96. J. Li, Y. He, W. Shi, S. Xiang, and W. Gao, Different Passivation Behavior Between α and β Phases of Ti-6Al-4V in HCl Solutions Under Oxygenated/Deoxygenated Conditions, Appl. Surf. Sci., 2022, 604, 154539. https://doi.org/10.1016/j.apsusc.2022.15453910.1016/j.apsusc.2022.154539 ↗
97. E. Galvanetto, F.P. Galliano, F. Borgioli, U. Bardi, and A. Lavacchi, XRD and XPS Study on Reactive Plasma Sprayed Titanium–Titanium Nitride Coatings, Thin Solid Films, 2001, 384, p 223–229. https://doi.org/10.1016/S0040-6090(00)01871-X10.1016/S0040-6090(00)01871-X ↗
98. V.M.C.A. Oliveira, M.O.H. Cioffi, M.J.R. Barboza, R. Landers, B. Schmitt, D.C.A.R. Tapia, and H.J.C. Voorwald, Plasma Immersion ion Implantation (PIII) Influence on Ti-6Al-4V Alloy: Frequency Effect, Int. J. Fatigue, 2018, 109, p 157–165. https://doi.org/10.1016/j.ijfatigue.2017.12.01610.1016/j.ijfatigue.2017.12.016 ↗
99. J. Guan, Q. Xiang, X. Zhang, J. Liu, and F. Yang, Analysis of the Mechanical Properties and Microstructure Oftitanium Surfaces Designed Byelectromagnetic Induction Nitriding, Mater. Res. Express, 2022, 9, p 020010. https://doi.org/10.1088/2053-1591/ac52c510.1088/2053-1591/ac52c5 ↗
100. J. Liu, Z. Wang, Z. Ye, W. Jin, Z. Chen, Y. Hu, J. Wu, D. Chen, B. Bai, X. Wang, Z. Cai, and K. Liu, Improved Dry Sliding Wear Behavior of TA1 Titanium by Low-Temperature Plasma Nitriding by CCPN Method, Vacuum, 2024, 221, 112945. https://doi.org/10.1016/j.vacuum.2023.11294510.1016/j.vacuum.2023.112945 ↗