Study for Characterizing Grinding Burn of 1045 Steel Based on Nonlinear Ultrasonic Coefficients
Source abstract
Abstract
Grinding burn is a common thermal damage phenomenon that causes the degradation of material surface properties. There are now some limitations for the existing methodologies used for grinding burn detection, such as the detection is susceptible to interference and the results lack unified worldwide standards. In the present work, the specimens of 1045 steel were prepared under different grinding conditions, and the degree of the grinding burn was then judged by observing the metallographic structure on the specimen surface. Two nonlinear ultrasonic detection models, critically refracted longitudinal wave (LCR) detection and Rayleigh wave detection, were appropriately established and designed. The experimental results revealed that the ultrasonic nonlinear coefficients of the specimens in various degrees of grinding burn were obviously different in the LCR detection model. Further, the changes of the ultrasonic nonlinear coefficients were mainly related to the variations of the metallographic structure caused by the grinding burn. The grinding burn might be characterized by the ultrasonic nonlinear coefficients of the LCR wave. It is noticed that a newly developed detection method for the grinding burn based on the LCR nonlinear ultrasonic detection would be feasible.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. W.B. Rowe, S.C.E. Black, B. Mills and H.S. Qi, Analysis of Grinding Temperatures by Energy Partitioning, Proc. Inst. Mech. Eng. Part B, 1996, 210(6), p 579–588. https://doi.org/10.1243/PIME_PROC_1996_210_156_0210.1243/PIME_PROC_1996_210_156_02 ↗
2. D. Curtis, H. Krain, A. Winder et al., Impact of Grinding Wheel Specification on Surface Integrity and Residual Stress when Grinding Inconel 718, Proc. Inst. Mech. Eng. Part B, 2021, 235, p 1668–1681. https://doi.org/10.1177/095440542096120910.1177/0954405420961209 ↗
3. H.S. Hou, C.F. Jiao et al., Detection of Cam Grinding Burns Using the Eddy Current Method, Insight, 2019, 61(6), p 337–340. https://doi.org/10.1784/insi.2019.61.6.33710.1784/insi.2019.61.6.337 ↗
4. R. Ito, T. Azuma et al., Development of Non-destructive Inspection System for Grinding Burn-An Application of the Grinding Burn Detecting Technique to Evaluate Residual Stress, Adv. Mater. Res., 2014, 1017, p 135–140. https://doi.org/10.4028/www.scientific.net/amr.1017.13510.4028/www.scientific.net/amr.1017.135 ↗
5. Z.I. Qu, H. Wang et al., Nondestructive Detection and Analysis of Skidding Damage for Bearing Steel 100Cr6 Using Improved Magnetic Barkhausen Noise Technique, J. Nondestruct. Eval., 2019, 38, p 92. https://doi.org/10.1007/s10921-019-0634-110.1007/s10921-019-0634-1 ↗
6. A. Lasaosa, K. Gurruchaga et al., Induction Hardened Layer Characterization and Grinding Burn Detection by Magnetic Barkhausen Noise Analysis, J. Nondestruct. Eval., 2017, 36(2), p 27. https://doi.org/10.1007/s10921-016-0388-y10.1007/s10921-016-0388-y ↗
7. Z. Yang, H. Wu, Z. Yu and Y. Huang, A Non-Destructive Surface Burn Detection Method for Ferrous Metals Based on Acoustic Emission and Ensemble Empirical Mode Decomposition: From Laser Simulation to Grinding Process, Meas. Sci. Technol., 2014, 25(3), p 035602. https://doi.org/10.1088/0957-0233/25/3/03560210.1088/0957-0233/25/3/035602 ↗
8. Y.J. Ren, Y.Z. Dong et al., The Investigation of Low-Cycle Fatigue Crack Propagation of 16 Mn Eccentric Bar Based on the Acoustic Emission Technique, Proc. Inst. Mech. Eng. Part B, 2021, 235(6–7), p 1235–1247. https://doi.org/10.1177/095440542097008510.1177/0954405420970085 ↗
9. A. Srivastava, A. Awale, M. Vashista et al., Characterization of Ground Steel Using Nondestructive Magnetic Barkhausen Noise Technique, J. Mater. Eng. Perform., 2014, 29, p 4617–4625. https://doi.org/10.1007/s11665-020-04993-610.1007/s11665-020-04993-6 ↗
10. B.F. He, C.E. Wei et al., A Survey of Methods for Detecting Metallic Grinding Burn, Measurement, 2019, 134, p 426–439. https://doi.org/10.1016/j.measurement.2018.10.09310.1016/j.measurement.2018.10.093 ↗
11. K.H. Matlack, J.Y. Kim et al., Review of Second Harmonic Generation Measurement Techniques for Material State Determination in Metals, J. Nondestruct. Eval., 2015, 34(1), p 273. https://doi.org/10.1007/s10921-014-0273-510.1007/s10921-014-0273-5 ↗
12. M. Zhang and F.Z. Xuan, Creep Damage Evaluation of Steam Turbine Rotor Steel by Using the Nonlinear Ultrasonic Technique, Chin. J. Mech. Eng., 2016, 52(2), p 76. https://doi.org/10.3901/jme.2016.02.07610.3901/jme.2016.02.076 ↗
13. Z. Chen, W. Lu, Y. Chen et al., Fatigue Crack Detection in AISI 304 Austenitic Stainless Steel Using Nonlinear and Linear Ultrasonic Testing Methods, J. Mater. Eng. Perform., 2020, 29, p 4040–4046. https://doi.org/10.1007/s11665-020-04914-710.1007/s11665-020-04914-7 ↗
14. Y. Zhang, X. Li, Z. Wu et al., Fatigue Life Prediction of Metallic Materials Based on the Combined Nonlinear Ultrasonic Parameter, J. Mater. Eng. Perform., 2017, 26, p 3648–3656. https://doi.org/10.1007/s11665-017-2811-710.1007/s11665-017-2811-7 ↗
15. Y.J. Lin, C.H. Yang and J.Y. Huang, Effect of Degradation on Non-Linear Ultrasonic Behaviour of Aged Centrifugally-Cast Stainless Steel, Insight, 2016, 58(3), p 142–144. https://doi.org/10.1784/insi.2016.58.3.14210.1784/insi.2016.58.3.142 ↗
16. P.M. Thanseer, A.K. Metya et al., Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation, J. Mater. Eng. Perform., 2017, 26, p 2632–2639. https://doi.org/10.1007/s11665-017-2722-710.1007/s11665-017-2722-7 ↗
17. J.F. Zhang, S.Y. Li et al., Effect of Plastic Deformation on Nonlinear Ultrasonic Response of Austenitic Stainless Steel, Mat. Sci. Eng. A-Struct., 2015, 622, p 146–152. https://doi.org/10.1016/j.msea.2014.10.08210.1016/j.msea.2014.10.082 ↗
18. Y.X. Xiang, M.X. Deng et al., Thermal Degradation Evaluation of HP40Nb Alloy Steel After Long Term Service Using a Nonlinear Ultrasonic Technique, J. Nondestruct. Eval., 2014, 33(2), p 279–287. https://doi.org/10.1007/s10921-013-0222-810.1007/s10921-013-0222-8 ↗
19. N. Pei and L.J. Bond, Analysis of Critically Refracted Longitudinal Waves, Proc. Artic., 2015 https://doi.org/10.1063/1.491480510.1063/1.4914805 ↗
20. P. Men, S.Y. Dong et al., Research on the Method of Quantitative Evaluating Material Hardness and Tensile Strength by Critically Refracted Longitudinal Wave, Appl. Acoust., 2020, 159, p 107105. https://doi.org/10.1016/j.apacoust.2019.10710510.1016/j.apacoust.2019.107105 ↗
21. H.I. Mao, Q.Z. Li, H.Y. Mao et al., Nonlinear Ultrasonic Characterization of Carburized Case Depth, NDT&E Int., 2020, 112, p 102244. https://doi.org/10.1016/j.ndteint.2020.10224410.1016/j.ndteint.2020.102244 ↗
22. K. Sreeraj, H.K. Maheshwari et al., Non-Contact Monitoring and Evaluation of Subsurface White Etching Area (WEA) Formation in Bearing STEEL USING RAYLEIGH SURFACE WAVES, Tribol. Int., 2021, 162, p 107134. https://doi.org/10.1016/j.triboint.2021.10713410.1016/j.triboint.2021.107134 ↗
23. T. Jin, D.J. Stephenson and J. Corbett, Burn Threshold of High-Carbon Steel in High-Efficiency Deep Grinding, Proc. Inst. Mech. Eng. Part B, 2002, 216(3), p 357–364. https://doi.org/10.1243/0954405021520021810.1243/09544050215200218 ↗
24. D.M.S. Ribeiro, P.R. Aguia et al., Spectra Measurements Using Piezoelectric Diaphragms to Detect Burn in Grinding Process, IEEE T. Instrum. Meas., 2017, 66(11), p 3052–3063. https://doi.org/10.1109/tim.2017.273103810.1109/tim.2017.2731038 ↗
25. A. Hikata, B.B. Chick and C. Elbaum, Effect of Dislocations on Inite Amplitude Ultrasonic Waves in Aluminum, Appl. Phys., 1963, 3(11), p 195–197. https://doi.org/10.1063/1.175384510.1063/1.1753845 ↗
26. C.D. Wallace, Thermoelasticity of Stressed Materials and Comparison of Various Elastic Constants, Phys. Rev., 1967, 162(3), p 776–789. https://doi.org/10.1103/physrev.162.77610.1103/physrev.162.776 ↗
27. A. Hikata, B.B. Chick and C. Elbaum, Dislocation Contribution to the Second Harmonic Generation of Ultrasonic Waves, Appl. Phys., 1965, 36(1), p 229–236. https://doi.org/10.1063/1.171388110.1063/1.1713881 ↗
28. W.T. Song, C. Xu et al., Non-Destructive Testing and Characterization of Residual Stress Field Using an Ultrasonic Method, Chin. J. Mech. Eng., 2016, 29(2), p 365–371.10.3901/CJME.2015.1023.126 ↗
29. D.C. Hurley, D. Balzar, P.T. Purtscher et al., Nonlinear Ultrasonic Parameter in Quenched Martensitic Steels, J. Appl. Phys., 1998, 83(9), p 4584–4588. https://doi.org/10.1063/1.36724110.1063/1.367241 ↗
30. C. Kim and I. Park, Microstructural Degradation Assessment in Pressure Vessel Steel by Harmonic Generation Technique, J. Nucl. Sci. Technol., 2008, 45(10), p 1036–1040. https://doi.org/10.1080/18811248.2008.971188910.1080/18811248.2008.9711889 ↗