journal article·2025-09-09Open access

Thermo-mechanical processing of Al–Mg–Si(Cu) alloy extrusions based on dynamic stretching

Dariusz Leśniak, Antoni Woźnicki, Beata Leszczyńska-Madej, Grzegorz Włoch, Tomasz Latos, Jacek Madura, Marek Bogusz, Piotr Korczak, Bartłomiej Płonka

Abstract

Abstract In the first part of the work, the 3-step homogenization procedure was carried out for AlMgSi(Cu) alloy, aimed at obtaining billets microstructure with numerous fine particles of strengthening phases and increased solidus temperature. In the second part of the work, an original on a global scale prototype device for the dynamic stretching of extruded profiles before artificial ageing, was proposed and tested in semi-industrial conditions. The thermo-mechanical treatment of extruded hollow profiles from AlMgSi(Cu) alloy with 1.22% content of copper was performed with dynamic deformation range: 0.25%, 0.5%, 1%, 1.5% and 2%. The microstructural inspection was performed in the welding area and outside the weld for variant after only extrusion and for variant after extrusion and dynamic stretching before artificial ageing. It was revealed that the designed three-stage homogenization treatment led to dissolution of soluble phases present in the as-cast billets microstructure, which caused significant increase in solidus temperature, from 509 °C in as-cast state to 573 °C after completed soaking. The application of dynamic deformation during the straightening of aluminium profiles after hot extrusion with water cooling on the press run, led to the induced favourable changes in the microstructure of the alloy, which translated into a significant increase in UTS of about 11%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Reiso O. Extrusion of AlMgSi alloys. Mater Forum. 2004;28:32–46.
2. Birol Y. Optimization of homogenization for a low alloyed AlMgSi alloy. Mater Charact. 2013;80:69–75. https://doi.org/10.1016/j.matchar.2013.03.013.10.1016/j.matchar.2013.03.013 ↗
3. Røyset J, Bauger Ø, Reiso O, Tundal U. Innovations in billet casting and homogenization. In: Proceedings of the 11th international aluminum extrusion technology seminar ET’16, Chicago, IL, USA, 2016.
4. Woźnicki A, Leśniak D, Włoch G, Leszczyńska-Madej B, Wojtyna A. The effect of homogenization conditions on the structure and properties of 6082 alloy billets. Arch Metall Mater. 2015;60:1763–72.10.1515/amm-2015-0303 ↗
5. Arnoldt AR, Schiffl A, Höppel HW, Österreicher JA. Influence of different homogenization heat treatments on the microstructure and hot flow stress of the aluminum alloy AA6082. Mater Char. 2022;191:112129. https://doi.org/10.1016/j.matchar.2022.112129.10.1016/j.matchar.2022.112129 ↗
6. Birol Y. Homogenization of direct chill cast AlSi1MgMn billets. Int J Mater Res. 2014;105(1):75–82. https://doi.org/10.3139/146.110992.10.3139/146.110992 ↗
7. Birol Y. Homogenization of EN AW 6005A alloy for improved extrudability. Metall Mater Trans A. 2013;44:504–11. https://doi.org/10.1007/s11661-012-1379-y.10.1007/s11661-012-1379-y ↗
8. Qin J, Nagaumi H, Yu C, Liu F, Li Y, Wang L. Coarsening behavior of Mg2Si precipitates during post homogenization cooling process in Al–Mg–Si alloy. J Alloys Compd. 2022;902:162851. https://doi.org/10.1016/j.jallcom.2021.162851.10.1016/j.jallcom.2021.162851 ↗
9. Chen XG, Langlais J. Solidification behavior of AA6111 Automotive Alloy. Mater Sci Forum. 2000;331–337:215–22.10.4028/www.scientific.net/MSF.331-337.215 ↗
10. Zhang S, Xiong B, Zhang Y, Li X, Wang F, Li Z, et al. The microstructural evolution of AA6111 aluminum alloy during homogenization treatment. Mater Sci Forum. 2013;749:223–8.10.4028/www.scientific.net/MSF.749.223 ↗
11. Wu Y, Xiong J, Lai R, Zhang X, Guo Z. The microstructure evolution of an Al–Mg–Si–Mn–Cu–Ce alloy during homogenization. J Alloys Compd. 2009;475:332–8. https://doi.org/10.1016/j.jallcom.2008.07.032.10.1016/j.jallcom.2008.07.032 ↗
12. Woźnicki A, Leszczyńska-Madej B, Włoch G, Madura J, Bogusz M, Leśniak D. Homogenization of extrusion billets of a novel Al–Mg–Si–Cu alloy with increased copper content. Materials. 2023;16:2091. https://doi.org/10.3390/ma16052091.10.3390/ma16052091 ↗
13. Lodgaard L, Ryum N. Precipitation of dispersoids containing Mn and/or Cr in Al–Mg–Si alloys. Mater Sci Eng A-Struct. 2000;283:144–52.10.1016/S0921-5093(00)00734-6 ↗
14. Han Y, Ma K, Wang C, Nagaumi H. Precipitation behavior of dispersoids in Al–Mg–Si–Cu–Mn–Cr alloy during homogenization annealing. In: Proceedings of the 13th International Conference on Aluminium Alloys ICAA13, Pittsburgh, PA, USA, 2012.
15. Hu R, Ogura T, Tezuka H, Sato T, Liu Q. Dispersoid formation and recrystallization behavior in an Al–Mg–Si–Mn alloy. J Mater Sci Technol. 2010;26(3):237–43. https://doi.org/10.1016/S1005-0302(10)60040-0.10.1016/S1005-0302(10)60040-0 ↗
16. Li Z, Qin J, Zhang H, Wang X, Zhang B, Nagaumi H. Improved distribution and uniformity of α-Al(Mn, Cr)Si dispersoids in Al–Mg–Si–Cu–Mn (6xxx) alloys by two-step homogenization. Metall Mater Trans A. 2021;52:3204–20. https://doi.org/10.1007/s11661-021-06243-3.10.1007/s11661-021-06243-3 ↗
17. Elasheri A, Elgallad EM, Parson N, Chen XG. Improving the dispersoid distribution and recrystallization resistance of a Zr-containing 6xxx alloy using two-step homogenization. Philos Mag A. 2022;102:2345–61. https://doi.org/10.1080/14786435.2022.2103597.10.1080/14786435.2022.2103597 ↗
18. Belov NA, Eskin DG, Aksenov AA. Multicomponent phase diagrams, applications for commercial Aluminum alloys. London: Elsevier; 2005.
19. Leśniak D, Gromek P. Estimation of extrusion welding conditions for 6xxx aluminum alloys. Procedia Manuf. 2020;47:253–60.10.1016/j.promfg.2020.04.213 ↗
20. Łatkowski A. Obróbka cieplno-mechaniczna stopów aluminium (in Polish). Pap AGH Univ Krakow Metall Foundry. 1989;1272:128.
21. Sin HS, Jo GG, Jeong YH, Sin MC. Effect of stretching on the microstructure and mechanical properties of Al–Li–Cu–Mg alloys. Korean J Mater Res. 1995;5:1005–112.
22. Kolar M, Pedersen KO, Gulbrandsen-Dahl S, Teichmann K, Marthinsen K. Effect of pre-deformation on mechanical response of an artificially aged Al–Mg–Si alloy. Mater Trans. 2011;52:1356–62.10.2320/matertrans.L-MZ201127 ↗
23. Wang Z, Li H, Miao F, Fang B, Song R, Zheng R. Improving the strength and ductility of Al–Mg–Si–Cu alloys by a novel thermo-mechanical treatment. Mater Sci Eng A. 2014;607:313–7.10.1016/j.msea.2014.04.009 ↗
24. Li L, Flores-Johnson EA, Shen L, Proust G. Effects of heat treatment and strain rate on the microstructure and mechanical properties of 6061 Al alloy. Int J Damage Mech. 2016;25:26–41.10.1177/1056789515569088 ↗
25. Granum H, Myhr O, Børvik T, Hopperstad OS. Effect of pre-stretching on the mechanical behaviour of three artificially aged 6xxx series aluminium alloys. Mater Today Commun. 2021;27:102408.10.1016/j.mtcomm.2021.102408 ↗
26. Scharifi E, Sajadifar SV, Moeini G, Weidig U, Böhm S, Niendorf T, et al. Dynamic tensile deformation of high strength aluminium alloys processed following novel thermomechanical treatment strategies. Adv Eng Mater. 2020;22:2000193.10.1002/adem.202000193 ↗
27. Tong M, Jiang F, Wang H, Jiang J, Ye P, Xu X. The evolutions of mechanical properties and microstructures of Al–Mg–Mn–Sc Zr alloy during dynamic stretching deformation. J Alloys Compd. 2021;889:161753.10.1016/j.jallcom.2021.161753 ↗
28. Li GA, Ma Z, Jiang JT, Shao WZ, Liu W, Zhen L. Effect of pre-stretch on the precipitation behavior and the mechanical properties of 2219 Al alloy. Materials. 2021;14:2101.10.3390/ma14092101 ↗
29. Ma Z, Robson JD. Understanding the effect of deformation combined with heat treatment on age hardening of Al–Zn–Mg–Cu alloy AA7075. Mater Sci Eng A. 2023;878:145212.10.1016/j.msea.2023.145212 ↗
30. Lesniak D, Zasadzinski J, Libura W, Leszczynska-Madej B, Bogusz M, Latos T, et al. Structure and mechanical properties of AlMgSi(Cu) extrudates straightened with dynamic deformation. Materials. 2024;17:3983.10.3390/ma17163983 ↗