Influence of Arc Length Correction on Friction and Wear Characteristics of Wire-Arc Additive Manufactured AA 5356 Alloy
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. N. Guo and M.C. Leu, Additive Manufacturing: Technology, Applications and Research Needs, Front. Mech. Eng., 2013, 8, p 215–243. https://doi.org/10.1007/s11465-013-0248-810.1007/s11465-013-0248-8 ↗
2. M. Vorkapić, D.M. Bajić, M. Baltić, D. Nešić, and I. Mladenović, Mechanical Properties of Laminate Materials Based on Polylactic Acid and Polyvinyl Chloride Meshes as Reinforcement, Tribol. Mater., 2024, 3(1), p 35–43. https://doi.org/10.46793/tribomat.2024.00510.46793/tribomat.2024.005 ↗
3. J. Nandy, H. Sarangi, and S. Sahoo, A Review on Direct Metal Laser Sintering: Process Features and Microstructure Modeling, Lasers Manuf. Mater. Process., 2019, 6, p 280–316. https://doi.org/10.1007/s40516-019-00094-y10.1007/s40516-019-00094-y ↗
4. G. Kostadinov, T. Penyashki, A. Nikolov, and A. Vencl, Improving the Surface Quality and Tribological Characteristics of 3D-Printed Titanium Parts through Reactive Electro-Spark Deposition, Materials, 2024, 17, p 382. https://doi.org/10.3390/ma1702038210.3390/ma17020382 ↗
5. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P. Colegrove, Wire+ Arc Additive Manufacturing, J. Mater. Sci. Technol., 2016, 32, p 641–647. https://doi.org/10.1179/1743284715Y.000000007310.1179/1743284715Y.0000000073 ↗
6. J. Gu, J. Ding, S.W. Williams, H. Gu, J. Bai, Y. Zhai, and P. Ma, The Strengthening Effect of Inter-Layer Cold Working and Post-Deposition Heat Treatment on the Additively Manufactured Al-6.3Cu Alloy, Mater. Sci. Eng. A, 2016, 651, p 18–26. https://doi.org/10.1016/j.msea.2015.10.10110.1016/j.msea.2015.10.101 ↗
7. L. Murr, S. Gaytan, A. Ceylan, E. Martinez, J. Martínez, D. Hernandez, B. Machado, D. Ramirez, F. Medina, S. Collins et al., Characterization of Titanium Aluminide Alloy Components Fabricated by Additive Manufacturing Using Electron Beam Melting, Acta Mater. Mater., 2010, 58, p 1887–1894. https://doi.org/10.1016/j.actamat.2009.11.03210.1016/j.actamat.2009.11.032 ↗
8. S. Pattanayak and S.K. Sahoo, Gas Metal Arc Welding Based Additive Manufacturing—A Review, CIRP J. Manuf. Sci. Technol., 2021, 33, p 398–442. https://doi.org/10.1016/j.cirpj.2021.04.01010.1016/j.cirpj.2021.04.010 ↗
9. S. Balos, M. Dramicanin, and P. Janjatovic, Gas Metal Arc Welding of Metal-Polymer-Metal Sheets, Tribol. Mater., 2022, 1(2), p 61–69. https://doi.org/10.46793/tribomat.2022.00810.46793/tribomat.2022.008 ↗
10. T.B. Kim, S. Yue, Z. Zhang, E. Jones, J.R. Jones, and P.D. Lee, Additive Manufactured Porous Titanium Structures: Through-Process Quantification of Pore And Strut Networks, J. Mater. Process. Technol., 2014, 214, p 2706–2715. https://doi.org/10.1016/j.jmatprotec.2014.05.00610.1016/j.jmatprotec.2014.05.006 ↗
11. R. Wang and F.H. Beck, New Stainless Steel Without Nickel or Chromium for Marine Applications, Met. Prog., 1983, 123, p 74–76.
12. C.G. Pickin, S.W. Williams, and M. Lunt, Characterisation of the Cold Metal Transfer (CMT) Process and its Application for Low Dilution Cladding, J. Mater. Process. Technol., 2011, 211(3), p 496–502. https://doi.org/10.1016/j.jmatprotec.2010.11.00510.1016/j.jmatprotec.2010.11.005 ↗
13. T.K. Pasupula and V. Jaya Prasad, Influence of Arc Length Correction on Microstructure, Mechanical Properties, and Defect Formation of Wire-Arc Additive Manufactured 5356 Alloy, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09227-710.1007/s11665-024-09227-7 ↗
14. R. Kaibyshev, F. Musin, D.R. Lesuer, and T.G. Nieh, Superplastic Behavior of an Al-Mg Alloy at Elevated Temperatures, Mater. Sci. Eng. A, 2003, 342(1–2), p 169–177. https://doi.org/10.1016/S0921-5093(02)00276-910.1016/S0921-5093(02)00276-9 ↗
15. Z.S. Toor and M.M. Zafar, Corrosion Degradation of Aluminium Alloys Using a Computational Framework, Tribol. Mater., 2022, 1(4), p 150–156. https://doi.org/10.46793/tribomat.2022.01910.46793/tribomat.2022.019 ↗
16. D. Klobčar, F. Pušavec, D. Bračun, I. Garašić, Z. Kožuh, A. Vencl, and U. Trdan, Influence of Friction Riveting Parameters on the Dissimilar Joint Formation and Strength, Materials, 2022, 15(19), p 6812. https://doi.org/10.3390/ma1519681210.3390/ma15196812 ↗
17. Z.C. Linn, W.W.M. Swe, S.O.E. Aung Kyaw, and A.K. Latt, Experimental and Numerical Analysis on the Thermal Performance of the Aluminium Absorber, Tribol. Mater., 2023, 2(4), p 162–171. https://doi.org/10.46793/tribomat.2023.02010.46793/tribomat.2023.020 ↗
18. J. Gu, J. Bai, J. Ding, S. Williams, L. Wang, and K. Liu, Design and Cracking Susceptibility of Additively Manufactured Al-Cu-Mg Alloys with Tandem Wires and Pulsed Arc, J. Mater. Process. Technol., 2018, 262, p 210–220. https://doi.org/10.1016/j.jmatprotec.2018.06.03010.1016/j.jmatprotec.2018.06.030 ↗
19. H. Zhang, H. Zhu, T. Qi, Z. Hu, and X. Zeng, Selective Lasermelting of High Strength Al-Cu- Mg Alloys: Processing, Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2016, 656, p 47–54. https://doi.org/10.1016/j.msea.2015.12.10110.1016/j.msea.2015.12.101 ↗
20. N. Kaufmann, M. Imran, T.M. Wischeropp, C. Emmelmann, S. Siddique, and F. Walther, Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM), Phys. Procedia, 2016, 83, p 918–926. https://doi.org/10.1016/j.phpro.2016.08.09610.1016/j.phpro.2016.08.096 ↗
21. Y. Shi, P. Rometsch, K. Yang, F. Palm, and X. Wu, Characterisation of a Novel Sc and Zr Modified Al-Mg Alloy Fabricated by Selective Laser Melting, Mater. Lett., 2017, 196, p 347–350. https://doi.org/10.1016/j.matlet.2017.03.08910.1016/j.matlet.2017.03.089 ↗
22. H. Geng, J. Li, J. Xiong, and X. Lin, Optimisation of Interpass Temperature and Heat Input for Wire and Arc Additive Manufacturing 5A06 Aluminium Alloy, Sci. Technol. Weld. Join., 2017, 22, p 472–483. https://doi.org/10.1080/13621718.2016.125903110.1080/13621718.2016.1259031 ↗
23. M. Tang and P.C. Pistorius, Oxides, Porosity and Fatigue performance of AlSi10Mg Parts Produced by Selective Laser Melting, Int. J. Fatigue, 2017, 94, p 192–201. https://doi.org/10.1016/j.ijfatigue.2016.06.00210.1016/j.ijfatigue.2016.06.002 ↗
24. T. Kimura, T. Nakamoto, M. Mizuno, and H. Araki, Effect of Silicon Content on Densification, Mechanical and Thermal Properties of Al-xSi Binary Alloys Fabricated Using Selective Laser Melting, Mater. Sci. Eng. A, 2017, 682, p 593–602. https://doi.org/10.1016/j.msea.2016.11.05910.1016/j.msea.2016.11.059 ↗
25. K.G. Prashanth, H.S. Shahabi, H. Attar, V.C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, and S. Scudinoa, Production of High Strength Al85Nd8Ni5Co2 Alloy by Selective Laser Melting, Addit. Manuf.. Manuf., 2015, 6, p 1–5. https://doi.org/10.1016/j.addma.2015.01.00110.1016/j.addma.2015.01.001 ↗
26. K.G. Prashanth, S. Scudino, A.K. Chaubey, L. Löber, P. Wang, H. Attar, F.P. Schimansky, F. Pyczak, and J. Eckert, Processing of Al-12Si-TNM Composites by Selective Laser Melting and Evaluation of Compressive and Wear Properties, J. Mater. Res., 2016, 31, p 55–65. https://doi.org/10.1557/jmr.2015.32610.1557/jmr.2015.326 ↗
27. J.C. Bailey, F.C. Porter, A.W. Pearson et al., Aluminium and Aluminium Alloys Corrosion, 3rd ed. Butterworth-Heinemann, UK, 1994, p 37
28. F. Felix, N. Simon, and G. Peter, Influence of Sheet Metal Texture on the Adhesive Wear and Friction Behaviour of EN AW-5083 Aluminum Under Dry and Starved Lubrication, Tribol. Int.. Int., 2020, 141, p 105956. https://doi.org/10.1016/j.triboint.2019.10595610.1016/j.triboint.2019.105956 ↗
29. V. Chakkravarthy and S. Jerome, Fabrication of Preferentially Oriented Al4043 Alloy and its Wear Anisotropy, Mater. Lett., 2020, 280, p 128578. https://doi.org/10.1016/j.matlet.2020.12857810.1016/j.matlet.2020.128578 ↗
30. G. Prabu, N. Jeyaprakash, C.-H. Yang, and N. Radhika, Analysis on the transformation of melt wear to self-healing crack of wire arc additive manufactured Al 5356 alloy, Tribol. Int.. Int., 2023, 188, p 108802. https://doi.org/10.1016/j.triboint.2023.10880210.1016/j.triboint.2023.108802 ↗
31. NCh. Kaushik and R.N. Rao, Effect of Grit Size on Two Body Abrasive Wear of Al 6082 Hybrid Composites Produced by Stir Casting Method, Tribol. Int.. Int., 2016, 102, p 52–60. https://doi.org/10.1016/j.triboint.2016.05.01510.1016/j.triboint.2016.05.015 ↗
32. NCh. Kaushik and R.N. Rao, The Effect of Wear Parameters and Heat Treatment on Two Body Abrasive Wear of Al-SiC-Gr Hybrid Composites, Tribol. Int.. Int., 2016, 96, p 184–190. https://doi.org/10.1016/j.triboint.2015.12.04510.1016/j.triboint.2015.12.045 ↗
33. P. Hariharasakthisudhan, S. Jose, and K. Manisekar, Dry Sliding Wear Behaviour of Single and Dual Ceramic Reinforcements Premixed with Al powder in AA6061 Matrix, J. Mater. Res. Technol., 2019, 8(1), p 275–283. https://doi.org/10.1016/j.jmrt.2018.01.00510.1016/j.jmrt.2018.01.005 ↗
34. A. Kumar, R.S. Rana, R. Purohit, A. Namdev, K.K. Saxena, and A. Kumar, Optimization of Dry Sliding Wear Behavior of Si3N4 and Gr Reinforced Al–Zn–Mg–Cu Composites Using Taguchi Method, J. Mater. Res. Technol., 2022, 19, 2022, p 275–283. https://doi.org/10.1016/j.jmrt.2022.06.17210.1016/j.jmrt.2022.06.172 ↗
35. S. Gong, N. Takata, M. Kobashi, and S.E. Shin, Wear Properties of Aluminum Alloys Fabricated by Laser Powder Bed Fusion, Tribol. Int.. Int., 2023, 187, p 108769. https://doi.org/10.1016/j.triboint.2023.10876910.1016/j.triboint.2023.108769 ↗
36. T.K. Pasupula, V.J. Prasad, and S. Kumar, Correlation between microstructure and hardness in 5356al fabricated by wire-arc additive manufacturing process, Advances in Manufacturing, Automation, Design and Energy Technologies. ICOFT. Springer Nature, Singapore, 2020. https://doi.org/10.1007/978-981-99-1288-9_2510.1007/978-981-99-1288-9_25 ↗
37. R.N. Rao and S. Das, Effect of Matrix Alloy and Influence of SiC Particle on the Sliding Wear Characteristics of Aluminium Alloy Composites, Mater. Design, 2010, 31(3), p 1200–1207. https://doi.org/10.1016/j.matdes.2009.09.03210.1016/j.matdes.2009.09.032 ↗
38. A. Vencl, Tribological Behavior of Ferrous-Based APS Coatings Under Dry Sliding Conditions, J. Therm. Spray Technol., 2015, 24, p 671–682. https://doi.org/10.1007/s11666-014-0202-210.1007/s11666-014-0202-2 ↗
39. S. Das, S.V. Prasad, and T.R. Ramachandran, Microstructure and Wear of Cast (Al-Si alloy)-Graphite Composites, Wear, 1989, 133(1), p 173–187. https://doi.org/10.1016/0043-1648(89)90122-110.1016/0043-1648(89)90122-1 ↗
40. A. Vencl, F. Vučetić, B. Bobić et al., The Tribological Characterisation in Dry Sliding Conditions of Compocasted Hybrid A356/SiCp/Grp Composites With Graphite Microparticles, Int. J. Adv. Manuf. Technol., 2019, 100, p 2135–2146. https://doi.org/10.1007/s00170-018-2866-010.1007/s00170-018-2866-0 ↗
41. A. Azeem, N.A. Badarulzaman, and W.F.F.W. Ali, Optimization of Wear and Hardness of Al-Zn-Mg-Cu Alloy Fabricated From Recycled Beverage Can Using Response Surface Methodology, SN Appl. Sci., 2020, 2, p 1210. https://doi.org/10.1007/s42452-020-2836-710.1007/s42452-020-2836-7 ↗