Flow Stress Analysis and Hot Bending of P11 Alloy Steel
Source abstract
Abstract
Based on the growing application value of the P11 alloy steel in the nuclear power field, its dynamic recrystallization (DRX) behavior was firstly investigated by means of isothermal hot compression experiments, under the conditions of a testing temperature range between 800 and 950 °C, and a strain rate range between 0.01 and 2/s. Furthermore, optical microscopy and transmission electron microscopy were also employed to analyze the effect of the mechanism of the strain rate on DRX. The results indicated that the grain size could be significantly refined with the increase of strain rate. Also, the recrystallized volume fraction was increased and the dislocation density decreased with the decrease of strain rate, for the same strain values. Subsequently, numerical simulations, under the assistance of experimental results on DRX behavior, were successfully used to study the hot push bending process and simultaneously obtain the processing parameters of the actual work-pieces. Finally, some comparative analyses were performed and discussed in parallel with the deformed actual work-pieces. The EBSD results on the deformed P11 alloy steel were emphasized for exploring the forming properties of this alloy steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. G. Harrop and B.P. Poirier, Construction of Westinghouse AP1000 Nuclear Power Plants in China[J], Int. Conf. Nucl. Eng., 2010, 6, p 303–309
2. H. Mirzadeh and A. Najafizadeh, Prediction of the Critical Conditions for Initiation of Dynamic Recrystallization [J], Mater. Des., 2010, 31, p 1174–117910.1016/j.matdes.2009.09.038 ↗
3. M.A. Mostafaei and M. Kazeminezhad, Analyses on the Flow Stress of an Al-Mg Alloy During Dynamic Recovery [J], J. Mater. Eng. Perform., 2013, 22, p 700–70510.1007/s11665-012-0305-1 ↗
4. Takanori Matsui, High Temperature Deformation and Dynamic Recrystallization Behavior of Alloy 718 [J], Mater. Trans., 2013, 54, p 512–51910.2320/matertrans.M2012202 ↗
5. G.Z. Quan, A. Mao, G.C. Luo et al., Constitutive Modeling for the Dynamic Recrystallization Kinetics of As-Extruded 3Cr20Ni10W2 Heat-Resistant Alloy Based on Stress-Strain Data [J], Mater. Des., 2013, 52, p 98–10710.1016/j.matdes.2013.05.030 ↗
6. E.I. Poliak and J.J. Jonas, A One-Parameter Approach to Determining the Critical Conditions for the Initiation of Dynamic Recrystallization [J], Acta Mater., 1996, 44, p 127–13610.1016/1359-6454(95)00146-7 ↗
7. J. Luo, M.Q. Li, W.X. Yu et al., Effect of the Strain on Processing Maps of Titanium Alloys in Isothermal Compression [J], Mater. Sci. Eng. A, 2009, 504, p 90–9810.1016/j.msea.2008.10.020 ↗
8. S. Mandal, V. Rakesh, P.V. Sivaprasad et al., Constitutive Equations to Predict High Temperature Flow Stress in a Ti-Modified Austenitic Stainless Steel [J], Mater. Sci. Eng. A, 2009, 500, p 114–12110.1016/j.msea.2008.09.019 ↗
9. J.J. Jonas, X. Quelennec, L. Jiang et al., The Avrami Kinetics of Dynamic Recrystallization [J], Acta Mater., 2009, 57, p 2748–275610.1016/j.actamat.2009.02.033 ↗
10. Y.C. Lin, M.S. Chen, J. Zhong et al., Effect of Temperature and Strain Rate on the Compressive Deformation Behavior of 42CrMo Steel [J], J. Mater. Process. Technol., 2008, 205, p 308–31510.1016/j.jmatprotec.2007.11.113 ↗
11. Y.H. Xiao and C. Guo, Constitutive Modelling for High Temperature Behavior of 1Cr12Ni3Mo2VNbN Martensitic Steel [J], Mater. Sci. Eng. A, 2011, 528, p 5081–508710.1016/j.msea.2011.03.050 ↗
12. E.I. Poliak and J.J. Jonas, Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation [J], ISIJ Int., 2003, 43, p 684–69110.2355/isijinternational.43.684 ↗
13. A. Najafizadeh and J.J. Jonas, Predicting the Critical Stress for Initiation of Dynamic Recrystallization [J], ISIJ Int., 2006, 46, p 1679–168410.2355/isijinternational.46.1679 ↗
14. A. Galiyev, R. Kaibyshev, and G. Gottstein, Correlation of Plastic Deformation and Dynamic Recrystallization in Magnesium Alloy ZK60 [J], Acta Mater., 2001, 49, p 119910.1016/S1359-6454(01)00020-9 ↗
15. H.J. McQueen, S. Yue, N.D. Ryan et al., Hot Working Characteristics of Steels in Austenitic State [J], J. Mater. Process. Technol., 1995, 53, p 293–31010.1016/0924-0136(95)01987-P ↗
16. S.F. Medina and C.A. Hernandez, Modelling of the Dynamic Recrystallization of Austenite in Low Alloy and Microalloyed Steels [J], Acta Mater., 1996, 44, p 165–17110.1016/1359-6454(95)00154-6 ↗
17. G.Z. Quan, G.S. Li, T. Chen et al., Dynamic Recrystallization Kinetics of 42CrMo Steel During Compression at Different Temperatures and Strain Rates [J], Mater. Sci. Eng. A, 2011, 528, p 4643–465110.1016/j.msea.2011.02.090 ↗
18. Y. Zhang, X.Q. Zeng, C. Lu et al., Deformation Behavior and Dynamic Recrystallization of a Mg-Zn-Y-Zr Alloy [J], Mater. Sci. Eng. A, 2006, 428, p 91–9710.1016/j.msea.2006.04.103 ↗
19. J.D. Robson and P.B. Prangnell, Predicting the Recrystallized Volume Fraction in AA7050 Hot Rolling Plate [J], Mater. Sci. Technol., 2002, 18, p 607–61410.1179/026708302225003622 ↗