The Correlation Among Deposition Parameters, Structure and Corrosion Behavior in ZnNi/Nano-SiC Coating
Source abstract
Abstract
The present work explores how deposition parameters affect structural and morphological characteristics of ZnNi/nano-SiC composites in order to engineer an environmentally benign corrosion-resistant coating. In this regard, ZnNi and ZnNi coatings containing SiC nanoparticles were electrodeposited from chloride bath by direct current method, and the effects of SiC concentration, deposition current density and two types of surfactant (sodium dodecyl sulfate, SDS, and hexadecyltrimethyl ammonium bromide, HTAB) were investigated. Increasing SiC nanoparticles concentration in the electrolyte enhances the SiC content of the coating and can affect the coating composition, structure and morphology. Elevation of deposition current density may reduce SiC content of the coating, yet this decline can be compensated by the addition of HTAB. Application of 11 g/L SiC nanoparticles produced a coating with a more even surface and less porosity that had the highest corrosion resistance. The presence of nanoparticles seemingly reduces the available surface for electrochemical reactions and decelerates corrosion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · ZnO doping and properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. M.M. Abou-Krisha, Effect of pH and current density on the electrodeposition of Zn-Ni-Fe alloys from a sulfate bath, J. Coat. Technol. Res., 2012, 9(6), p 775–78310.1007/s11998-012-9402-1 ↗
2. S.H. Mosavat, M.H. Shariat, and M.E. Bahrololoom, Study of corrosion performance of electrodeposited nanocrystalline Zn-Ni alloy coatings, Corros. Sci., 2012, 59, p 81–8710.1016/j.corsci.2012.02.012 ↗
3. A. Maciej, G. Nawrat, W. Simka, and J. Piotrowski, Formation of compositionally modulated Zn-Ni alloy coatings on steel, Mater. Chem. Phys., 2012, 132(2–3), p 1095–110210.1016/j.matchemphys.2011.12.074 ↗
4. A. Conde, M.A. Arenas, and J.J. de Damborenea, Electrodeposition of Zn-Ni Coatings as Cd replacement for corrosion protection of high strength steel, Corros. Sci., 2011, 53(4), p 1489–149710.1016/j.corsci.2011.01.021 ↗
5. K.R. Sriraman, H.W. Strauss, S. Brahimi, R.R. Chromik, J.A. Szpunar, J.H. Osborne, and S. Yue, Tribological behavior of electrodeposited Zn, Zn-Ni, Cd and Cd-Ti coatings on low carbon steel substrates, Tribol. Int., 2012, 56, p 107–12010.1016/j.triboint.2012.06.008 ↗
6. M. Mouanga, M. Puiggali, and O. Devos, EIS and LEIS investigation of aging low carbon steel with Zn-Ni coating, Electrochim. Acta, 2013, 106, p 82–9010.1016/j.electacta.2013.05.021 ↗
7. V. Bachvarov, M. Peshova, S. Vitkova, and N. Boshkov, Electrodeposition, structure and composition of ternary Zn-Ni-P alloys, Mater. Chem. Phys., 2012, 136(2–3), p 999–100710.1016/j.matchemphys.2012.08.039 ↗
8. R.M. Gnanamuthu, S. Mohan, G. Saravanan, and C.W. Lee, Comparative study on structure, corrosion and hardness of Zn-Ni alloy deposition on AISI, 347 steel aircraft material, J. Alloys Compd., 2012, 513, p 449–45410.1016/j.jallcom.2011.10.078 ↗
9. S. Yogesha and A.C. Hegde, Optimization of deposition conditions for development of high corrosion resistant Zn-Fe multilayer coatings, J. Mater. Process. Technol., 2011, 211(8), p 1409–141510.1016/j.jmatprotec.2011.03.010 ↗
10. C.M. PraveenKumar, T.V. Venkatesha, K. Vathsala, and K.O. Nayana, Electrodeposition and corrosion behavior of Zn-Ni and Zn-Ni-Fe2O3 coatings, J. Coat. Technol. Res., 2012, 9(1), p 71–7710.1007/s11998-011-9322-5 ↗
11. S. Basavanna and Y.A. Naik, Study of the effect of new brightener on Zn-Ni alloy electrodeposition from acid sulphate bath, J. Appl. Electrochem., 2011, 41(5), p 535–54110.1007/s10800-011-0263-6 ↗
12. S.H. Mosavat, M.E. Bahrololoom, and M.H. Shariat, Electrodeposition of nanocrystalline Zn-Ni alloy from alkaline glycinate bath containing saccharin as additive, Appl. Surf. Sci., 2011, 257(20), p 8311–831610.1016/j.apsusc.2011.03.017 ↗
13. N. Eliaz, K. Venkatakrishna, and A.C. Hegde, Electroplating and characterization of Zn–Ni, Zn-Co and Zn-Ni-Co alloys, Surf. Coat. Technol., 2010, 205(7), p 1969–197810.1016/j.surfcoat.2010.08.077 ↗
14. A.C. Hegde, K. Venkatakrishna, and N. Eliaz, Electrodeposition of Zn-Ni, Zn-Fe and Zn-Ni–Fe alloys, Surf. Coat. Technol., 2010, 205(7), p 2031–204110.1016/j.surfcoat.2010.08.102 ↗
15. R. Ramanauskas, L. Gudavičiūtė, A. Kaliničenko, and R. Juškėnas, Pulse plating effect on microstructure and corrosion properties of Zn-Ni alloy coatings, J. Solid State Electrochem., 2005, 9(12), p 900–90810.1007/s10008-005-0049-z ↗
16. K.R. Sriraman, S. Brahimi, J.A. Szpunar, J.H. Osborne, and S. Yue, Tribocorrosion behavior of Zn, Zn-Ni, Cd and Cd-Ti electrodeposited on low carbon steel substrates, Surf. Coat. Technol., 2013, 224, p 126–13710.1016/j.surfcoat.2013.03.010 ↗
17. K. Wykpis, M. Popczyk, and A. Budniok, Electrolytic deposition and corrosion resistance of Zn-Ni coatings obtained from sulphate-chloride bath, Bull. Mater. Sci., 2011, 34(4), p 997–100110.1007/s12034-011-0228-8 ↗
18. M. Gavrila, J.P. Millet, H. Mazille, D. Marchandise, and J.M. Cuntz, Corrosion behaviour of zinc-nickel coatings, electrodeposited on steel, Surf. Coat. Technol., 2000, 123(2–3), p 164–17210.1016/S0257-8972(99)00455-7 ↗
19. K.R. Sriraman, S. Brahimi, J.A. Szpunar, J.H. Osborne, and S. Yue, Characterization of corrosion resistance of electrodeposited Zn-Ni, Zn and Cd coatings, Electrochim. Acta, 2013, 105, p 314–32310.1016/j.electacta.2013.05.010 ↗
20. A. Gomes, I. Almeida, T. Frade, and A.C. Tavares, Stability of Zn-Ni-TiO2 and Zn-TiO2 nanocomposite coatings in near-neutral sulphate solutions, J. Nanopart. Res., 2012, 14(2), p 1–1310.1007/s11051-011-0692-5 ↗
21. B.M. Praveen and T.V. Venkatesha, Electrodeposition and properties of Zn-Ni-CNT composite coatings, J. Alloys Compd., 2009, 482(1–2), p 53–5710.1016/j.jallcom.2009.04.056 ↗
22. P.C. Tulio, S.E.B. Rodrigues, and I.A. Carlos, The influence of SiC and Al2O3 micrometric particles on the electrodeposition of ZnNi films and the obtainment of ZnNi-SiC and ZnNi-Al2O3 electrocomposite coatings from slightly acidic solutions, Surf. Coat. Technol., 2007, 202(1), p 91–9910.1016/j.surfcoat.2007.04.084 ↗
23. H. Zheng, M. An, and J. Lu, Surface characterization of the Zn-Ni-Al2O3 nanocomposite coating fabricated under ultrasound condition, Appl. Surf. Sci., 2008, 254(6), p 1644–165010.1016/j.apsusc.2007.07.110 ↗
24. S. Yari and C. Dehghanian, Deposition and characterization of nanocrystalline and amorphous Ni-W coatings with embedded alumina nanoparticles, Ceram. Int., 2013, 39(7), p 7759–776610.1016/j.ceramint.2013.03.033 ↗
25. H. Zheng and M. An, Electrodeposition of Zn-Ni-Al2O3 nanocomposite coatings under ultrasound conditions, J. Alloys Compd., 2008, 459(1), p 548–55210.1016/j.jallcom.2007.05.043 ↗
26. B. Bakhit, A. Akbari, F. Nasirpouri, and M.G. Hosseini, Corrosion resistance of Ni-Co alloy and Ni-Co/SiC nanocomposite coatings electrodeposited by sediment codeposition technique, Appl. Surf. Sci., 2014, 307, p 351–35910.1016/j.apsusc.2014.04.037 ↗
27. M.R. Vaezi, S.K. Sadrnezhaad, and L. Nikzad, Electrodeposition of Ni-SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics, Colloids Surf., 2008, 315(1–3), p 176–18210.1016/j.colsurfa.2007.07.027 ↗
28. L. Shi, C. Sun, P. Gao, F. Zhou, and W. Liu, Mechanical properties and wear and corrosion resistance of electrodeposited Ni-Co/SiC nanocomposite coating, Appl. Surf. Sci., 2006, 252(10), p 3591–359910.1016/j.apsusc.2005.05.035 ↗
29. M. Ger, Electrochemical deposition of nickel/SiC composites in the presence of surfactants, Mater. Chem. Phys., 2004, 87(1), p 67–7410.1016/j.matchemphys.2004.04.022 ↗
30. C.T.J. Low, R.G.A. Wills, and F.C. Walsh, Electrodeposition of composite coatings containing nanoparticles in a metal deposit, Surf. Coat. Technol., 2006, 201(1–2), p 371–383
31. S. Shivakumara, U. Manohar, Y.A. Naik, and T.V. Venkatesha, Influence of additives on electrodeposition of bright Zn-Ni alloy on mild steel from acid sulphate bath, Bull. Mater. Sci., 2007, 30(5), p 455–46210.1007/s12034-007-0072-z ↗
32. M. Lekka, N. Kouloumbi, M. Gajo, and P.L. Bonora, Corrosion and wear resistant electrodeposited composite coatings, Electrochim. Acta, 2005, 50(23), p 4551–455610.1016/j.electacta.2004.11.067 ↗
33. M. Srivastava, V.K.W. Grips, and K.S. Rajam, Influence of SiC, Si3N4 and Al2O3 particles on the structure and properties of electrodeposited Ni, Mater. Lett., 2008, 62(20), p 3487–348910.1016/j.matlet.2008.03.008 ↗
34. F. Bigdeli and S.R. Allahkaram, An investigation on corrosion resistance of as-applied and heat treated Ni-P/nanoSiC coatings, Mater. Des., 2009, 30(10), p 4450–445310.1016/j.matdes.2009.04.020 ↗
35. I. Garcia, J. Fransaer, and J. Celis, Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles, Surf. Coat. Technol., 2001, 148(2–3), p 171–17810.1016/S0257-8972(01)01336-6 ↗
36. J. Alexis, B. Etcheverry, J.D. Beguin, and J.P. Bonino, Structure, morphology and mechanical properties of electrodeposited composite coatings Ni-P/SiC, Mater. Chem. Phys., 2010, 120(2–3), p 244–25010.1016/j.matchemphys.2009.12.013 ↗
37. K.H. Hou, M.D. Ger, L.M. Wang, and S.T. Ke, The wear behaviour of electro-codeposited Ni-SiC composites, Wear, 2002, 253(9–10), p 994–100310.1016/S0043-1648(02)00222-3 ↗
38. P. Nowak, R.P. Socha, M. Kaisheva, J. Fransaer, J. Celis, and Z. Stoinov, Electrochemical investigation of the codeposition of SiC and SiO2 particles with nickel, J. Appl. Electrochem., 2000, 30(4), p 429–43710.1023/A:1003979117146 ↗
39. C. Muller, M. Sarret, and M. Benballa, ZnNi/SiC composites obtained from an alkaline bath, Surf. Coat. Technol., 2002, 162(1), p 49–5310.1016/S0257-8972(02)00360-2 ↗
40. A. Hovestad and L.J.J. Janssen, Electroplating of metal matrix composites by codeposition of suspended particles, Modern Aspects of Electrochemistry No. 38, B.E. Conway, C.G. Vayenas, R.E. White, and M. Gamboa-Adelco, Ed., Kluwer Academic/Plenum Publishers, New York, 2005, p 475–53210.1007/0-387-25838-8_6 ↗
41. M.M. Abou-Krisha, F.H. Assaf, and A.A. Toghan, Electrodeposition of Zn-Ni alloys from sulfate bath, J. Solid State Electrochem., 2007, 11(2), p 244–25210.1007/s10008-006-0099-x ↗
42. S. Wang and W.J. Wei, Kinetics of electroplating process of nano-sized ceramic particle/Ni composite, Mater. Chem. Phys., 2003, 78(3), p 574–58010.1016/S0254-0584(01)00564-8 ↗
43. H. Niazi, F. Golestani-Fard, W. Wang, M. Shahmiri, H.R. Zargar, A. Alfantazi, and R. Bayati, Structure-property correlation in EEMAO fabricated TiO2-Al2O3 nanocomposite coatings, ACS Appl. Mater. Interfaces, 2014, 6(8), p 5538–554710.1021/am405938n ↗
44. J.L. Ortiz-Aparicio, Y. Meas, G. Trejo, R. Ortega, T.W. Chapman, E. Chainet, and P. Ozil, Effect of aromatic aldehydes on the electrodeposition of ZnCo alloy from cyanide-free alkaline-gluconate electrolytes, J. Appl. Electrochem., 2011, 41(6), p 669–68010.1007/s10800-011-0279-y ↗
45. R. Fratesi and G. Roventi, Corrosion resistance of Zn–Ni alloy coatings in industrial production, Surf. Coat. Technol., 1996, 82(1–2), p 158–16410.1016/0257-8972(95)02668-1 ↗