Effect of Nitride Addition on Microstructure, Hardness, and Wear Resistance of Additively Manufactured Stainless Steel
Source abstract
Abstract
Abstract Modified feedstock containing 316L stainless steel powder along with 1 wt.% of different nitrides, namely aluminum nitride (AlN), boron nitride (BN), titanium nitride (TiN), iron nitride (Fe x N) and silicon nitride (Si 3 N 4 ) were laser powder bed fusion (LPBF) printed. The influence of these nitrides on the surface roughness, microhardness, and wear resistance of LPBF-316L has been investigated. The BN addition has significantly improved the microhardness and wear resistance of LPBF-316L, whereas the surface roughness has declined. The improved properties in LPBF-316L with BN addition were correlated with the altered microstructure.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. D. Kong, C. Dong, X. Ni, and X. Li, Corrosion of Metallic Materials Fabricated by Selective Laser Melting, NPJ. Mater. Degrad., 2019 https://doi.org/10.1038/s41529-019-0086-110.1038/s41529-019-0086-1 ↗
2. V.B. Vukkum, T. Ray, A. Karmakar, and S. Das, Microstructure – Texture – Mechanical Property Correlation in Laser-Welded Dual-Phase and Interstitial-Free Steel, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-07959-610.1007/s11665-023-07959-6 ↗
3. V.B. Vukkum and R.K. Gupta, Review on Corrosion Performance of Laser Powder-Bed Fusion Printed 316L Stainless Steel: Effect of Processing Parameters, Manufacturing Defects, Post-Processing, Feedstock, and Microstructure, Mater. Design, 2022, 12, p 110874. https://doi.org/10.1016/j.matdes.2022.11087410.1016/j.matdes.2022.110874 ↗
4. G. Sander, J. Tan, P. Balan, O. Gharbi, D.R. Feenstra, L. Singer, S. Thomas, R.G. Kelly, J.R. Scully, and N. Birbilis, Corrosion of Additively Manufactured Alloys: A Review, Corrosion, 2018, 74(12), p 1318–1350.10.5006/2926 ↗
5. GE, “The Catalyst Engine: GE Advanced Turboprop Engine,” 2022, https://www.geaviation.com/sites/default/files/2022-01/GECatalyst-Datasheet.pdf.
6. T. Voisin, R. Shi, Y. Zhu, Z. Qi, M. Wu, S. Sen-Britain, Y. Zhang, S.R. Qiu, Y.M. Wang, S. Thomas, and B.C. Wood, Pitting Corrosion in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion Additive Manufacturing: A Review and Perspective, JOM, 2022, 74(4), p 1668–1689. https://doi.org/10.1007/S11837-022-05206-210.1007/S11837-022-05206-2 ↗
7. H. Yin, J. Yang, Y. Zhang, L. Crilly, R.L. Jackson, and X. Lou, Carbon Nanotube (CNT) Reinforced 316L Stainless Steel Composites Made by Laser Powder Bed Fusion: Microstructure and Wear Response, Wear, 2022, 496–497, 204281. https://doi.org/10.1016/j.wear.2022.20428110.1016/j.wear.2022.204281 ↗
8. U. Scipioni Bertoli, B.E. MacDonald, and J.M. Schoenung, Stability of Cellular Microstructure in Laser Powder Bed Fusion of 316L Stainless Steel, Mater. Sci. Eng. A, 2019, 739, p 109–117. https://doi.org/10.1016/j.msea.2018.10.05110.1016/j.msea.2018.10.051 ↗
9. D. Riabov, A. Leicht, J. Ahlström, and E. Hryha, Investigation of the Strengthening Mechanism in 316L Stainless Steel Produced with Laser Powder Bed Fusion, Mater. Sci. Eng. A, 2021, 822, 141699.10.1016/j.msea.2021.141699 ↗
10. J. Boes, A. Röttger, L. Becker, and W. Theisen, Processing of Gas-Nitrided AISI 316L Steel Powder by Laser Powder Bed Fusion – Microstructure and Properties, Addit. Manuf., 2019, 30, 100836. https://doi.org/10.1016/j.addma.2019.10083610.1016/j.addma.2019.100836 ↗
11. D. Riabov, M. Rashidi, E. Hryha, and S. Bengtsson, Effect of the Powder Feedstock on the Oxide Dispersion Strengthening of 316L Stainless Steel Produced by Laser Powder Bed Fusion, Mater Charact, 2020, 169, 110582.10.1016/j.matchar.2020.110582 ↗
12. A. Eliasu, A. Czekanski, and S. Boakye-Yiadom, Effect of Laser Powder Bed Fusion Parameters on the Microstructural Evolution and Hardness of 316L Stainless Steel, Int. J. Adv. Manufact. Technol., 2021, 113(9–10), p 2651–2669. https://doi.org/10.1007/s00170-021-06818-910.1007/s00170-021-06818-9 ↗
13. P. Dong, F. Vecchiato, Z. Yang, P.A. Hooper, and M.R. Wenman, The Effect of Build Direction and Heat Treatment on Atmospheric Stress Corrosion Cracking of Laser Powder Bed Fusion 316L Austenitic Stainless Steel, Addit. Manuf., 2021, 40, 101902.
14. X. Lou, M. Song, P.W. Emigh, M.A. Othon, and P.L. Andresen, On the Stress Corrosion Crack Growth Behaviour in High Temperature Water of 316L Stainless Steel Made by Laser Powder Bed Fusion Additive Manufacturing, Corros. Sci., 2017, 128, p 140–153. https://doi.org/10.1016/j.corsci.2017.09.01710.1016/j.corsci.2017.09.017 ↗
15. Z. Duan, C. Man, H. Cui, Z. Cui, and X. Wang, Formation Mechanism of MnS Inclusion during Heat Treatments and Its Influence on the Pitting Behavior of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion, Corros. Commun., 2022 https://doi.org/10.1016/j.corcom.2022.04.00210.1016/j.corcom.2022.04.002 ↗
16. O. Andreau, E. Pessard, I. Koutiri, P. Peyre, and N. Saintier, Influence of the Position and Size of Various Deterministic Defects on the High Cycle Fatigue Resistance of a 316L Steel Manufactured by Laser Powder Bed Fusion, Int. J. Fatigue, 2021, 143, 105930.10.1016/j.ijfatigue.2020.105930 ↗
17. B. AlMangour, “Additive Manufacturing of Emerging Materials,” 2019, https://link.springer.com/content/pdf/https://doi.org/10.1007/978-3-319-91713-9.pdf. Accessed 3 December 2024.10.1007/978-3-319-91713-9.pdf ↗
18. T. Larimian, B. AlMangour, D. Grzesiak, G. Walunj, and T. Borkar, Effect of Laser Spot Size, Scanning Strategy, Scanning Speed, and Laser Power on Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated via Selective Laser Melting, J. Mater. Eng. Perform., 2022, 31(3), p 2205–2224.10.1007/s11665-021-06387-8 ↗
19. D.R. Eo, S.G. Chung, J.M. Jeon, and J.W. Cho, Melt Pool Oxidation and Reduction in Powder Bed Fusion, Addit. Manuf., 2021, 41, 101982.
20. P.A. Hooper, Melt Pool Temperature and Cooling Rates in Laser Powder Bed Fusion, Addit. Manuf., 2018, 22, p 548–559.
21. W. Shifeng, L. Shuai, W. Qingsong, C. Yan, Z. Sheng, and S. Yusheng, Effect of Molten Pool Boundaries on the Mechanical Properties of Selective Laser Melting Parts, J. Mater. Process. Technol., 2014, 214(11), p 2660–2667.10.1016/j.jmatprotec.2014.06.002 ↗
22. S. Bahl, S. Mishra, K.U. Yazar, I.R. Kola, K. Chatterjee, and S. Suwas, Non-Equilibrium Microstructure, Crystallographic Texture and Morphological Texture Synergistically Result in Unusual Mechanical Properties of 3D Printed 316L Stainless Steel, Addit. Manuf., 2019, 28(April), p 65–77. https://doi.org/10.1016/j.addma.2019.04.01610.1016/j.addma.2019.04.016 ↗
23. D. Kong, C. Dong, S. Wei, X. Ni, L. Zhang, R. Li, L. Wang, C. Man, and X. Li, About Metastable Cellular Structure in Additively Manufactured Austenitic Stainless Steels, Addit. Manufact., 2021, 38, 101804.
24. A. du Plessis, S.M.J. Razavi, M. Benedetti, S. Murchio, M. Leary, M. Watson, D. Bhate, and F. Berto, Properties and Applications of Additively Manufactured Metallic Cellular Materials: A Review, Prog. Mater. Sci., 2021, 2022(125), 100918. https://doi.org/10.1016/j.pmatsci.2021.10091810.1016/j.pmatsci.2021.100918 ↗
25. Y. Zhong, L. Liu, S. Wikman, D. Cui, and Z. Shen, Intragranular Cellular Segregation Network Structure Strengthening 316L Stainless Steel Prepared by Selective Laser Melting, J. Nuclear Mater., 2016, 470, p 170–178.10.1016/j.jnucmat.2015.12.034 ↗
26. V.B. Vukkum, J. Christudasjustus, A.A. Darwish, S.M. Storck, and R.K. Gupta, Enhanced Corrosion Resistance of Additively Manufactured Stainless Steel by Modification of Feedstock, NPJ. Mater. Degrad., 2022, 6(2), p 1–11.
27. G. Wang, H. Ouyang, C. Fan, Q. Guo, Z. Li, W. Yan, and Z. Li, The Origin of High-Density Dislocations in Additively Manufactured Metals, Mater. Res. Lett., 2020, 8(8), p 283–290. https://doi.org/10.1080/21663831.2020.175173910.1080/21663831.2020.1751739 ↗
28. C.S. Witharamage, M.A. Alrizqi, J. Chirstudasjustus, A.A. Darwish, T. Ansell, A. Nieto, and R.K. Gupta, Corrosion-Resistant Metallic Coatings for Aluminum Alloys by Cold Spray, Corros. Sci., 2022, 209, p 110720. https://doi.org/10.1016/j.corsci.2022.11072010.1016/j.corsci.2022.110720 ↗
29. F. Yan, W. Xiong, E. Faierson , and G.B. Olson, Characterization of Nano-Scale Oxides in Austenitic Stainless Steel Processed by Powder Bed Fusion, Scr. Mater., Acta Mater. Inc, 2018, 155, p 104–108.
30. M.B. Wilms, R. Streubel, F. Frömel, A. Weisheit, J. Tenkamp, F. Walther, S. Barcikowski, J.H. Schleifenbaum , and B. Gökce, Laser Additive Manufacturing of Oxide Dispersion Strengthened Steels Using Laser-Generated Nanoparticle-Metal Composite Powders, Procedia CIRP, 2018, 74, p 196–200. https://doi.org/10.1016/j.procir.2018.08.09310.1016/j.procir.2018.08.093 ↗
31. J.M. Jeon, J.M. Park, J.H. Yu, J.G. Kim, Y. Seong, S.H. Park , and H.S. Kim, Effects of Microstructure and Internal Defects on Mechanical Anisotropy and Asymmetry of Selective Laser-Melted 316L Austenitic Stainless Steel, Mater. Sci. Eng. A, 2019, 763, p 138152. https://doi.org/10.1016/j.msea.2019.13815210.1016/j.msea.2019.138152 ↗
32. M. Laleh, A.E. Hughes, S. Yang, J. Wang, J. Li, A.M. Glenn, W. Xu , and M.Y. Tan, A Critical Insight into Lack-of-Fusion Pore Structures in Additively Manufactured Stainless Steel, Addit. Manuf., 2021, 38, 101762.
33. S. Greco, K. Gutzeit, H. Hotz, B. Kirsch , and J.C. Aurich, Selective Laser Melting (SLM) of AISI 316L—Impact of Laser Power Layer Thickness, and Hatch Spacing on Roughness, Density, and Microhardness at Constant Input Energy Density, Int. J. Adv. Manufact. Technol., 2020, 108(5–6), p 1551–1562. https://doi.org/10.1007/S00170-020-05510-8/FIGURES/1310.1007/S00170-020-05510-8/FIGURES/13 ↗
34. J.J. Marattukalam, D. Karlsson, V. Pacheco, P. Beran, U. Wiklund, U. Jansson, B. Hjörvarsson , and M. Sahlberg, The Effect of Laser Scanning Strategies on Texture, Mechanical Properties, and Site-Specific Grain Orientation in Selective Laser Melted 316L SS, Mater. Des., 2020, 193, 108852.10.1016/j.matdes.2020.108852 ↗
35. M. Kazemipour, A. Nasiri, and M. Mohammadi, “On Microstructure and Corrosion Properties of Selective Laser Melted 316L Stainless Steel,” 2018.10.25071/10315/35428 ↗
36. X. Qi, H. Feng and L. Liu, Microstructure and Mechanical Properties of 316L Stainless Steel Produced by Selective Laser Melting, AIP Confer. Proceed., 2019 https://doi.org/10.1063/1.512534710.1063/1.5125347 ↗
37. T. Zhong, K. He, H. Li , and L. Yang, Mechanical Properties of Lightweight 316L Stainless Steel Lattice Structures Fabricated by Selective Laser Melting, Mater. Des., 2019, 181, 108076.10.1016/j.matdes.2019.108076 ↗
38. A.-H. Puichaud, C. Flament, A. Chniouel, F. Lomello, E. Rouesne, P.-F. Giroux, H. Maskrot, F. Schuster , and J.-L. Béchade, Microstructure and Mechanical Properties Relationship of Additively Manufactured 316L Stainless Steel by Selective Laser Melting, EPJ N-Nuclear Sci. Technol. EDP Sci., 2019, 5, p 23.10.1051/epjn/2019051 ↗
39. M.S.I.N. Kamariah, W.S.W. Harun, N.Z. Khalil, F. Ahmad, M.H. Ismail , and S. Sharif, Effect of Heat Treatment on Mechanical Properties and Microstructure of Selective Laser Melting 316L Stainless Steel, IOP Confer. Series: Mater. Sci. Eng., 2017, 257, p 012021.10.1088/1757-899X/257/1/012021 ↗
40. D. Kong, C. Dong, X. Ni, L. Zhang, J. Yao, C. Man, X. Cheng, K. Xiao , and X. Li, Mechanical Properties and Corrosion Behavior of Selective Laser Melted 316L Stainless Steel after Different Heat Treatment Processes, J. Mater. Sci. Technol. The Edit. Office of J. Mater. Sci. Technol., 2019, 35(7), p 1499–1507. https://doi.org/10.1016/j.jmst.2019.03.00310.1016/j.jmst.2019.03.003 ↗
41. E. Liverani, S. Toschi, L. Ceschini , and A. Fortunato, Effect of Selective Laser Melting (SLM) Process Parameters on Microstructure and Mechanical Properties of 316L Austenitic Stainless Steel, J. Mater. Process. Technol., 2017, 249, p 255–263.10.1016/j.jmatprotec.2017.05.042 ↗
42. T. Larimian, M. Kannan, D. Grzesiak, B. AlMangour , and T. Borkar, Effect of Energy Density and Scanning Strategy on Densification, Microstructure and Mechanical Properties of 316L Stainless Steel Processed via Selective Laser Melting, Mater. Sci. Eng. A, 2020, 770, p 138455. https://doi.org/10.1016/j.msea.2019.13845510.1016/j.msea.2019.138455 ↗
43. B. AlMangour, D. Grzesiak , and J.M. Yang, In-Situ Formation of Novel TiC-Particle-Reinforced 316L Stainless Steel Bulk-Form Composites by Selective Laser Melting, J. Alloys Compd., 2017, 706, p 409–418. https://doi.org/10.1016/j.jallcom.2017.01.14910.1016/j.jallcom.2017.01.149 ↗
44. V.B. Vukkum, F. Ozdemir, S. Storck , and R.K. Gupta, Corrosion Performance of Feedstock Modified – Additively Manufactured Stainless Steel, Corros. Sci., 2022, 209, 110724. https://doi.org/10.1016/J.CORSCI.2022.11072410.1016/J.CORSCI.2022.110724 ↗
45. V.B. Vukkum, E. Delvecchio, J. Christudasjustus, S. Storck , and R.K. Gupta, Intergranular Corrosion of Feedstock Modified — Additively Manufactured Stainless Steel After Sensitization, Corrosion, 2023, 79(6), p 624–636. https://doi.org/10.5006/424510.5006/4245 ↗
46. Y. Sun, A. Moroz , and K. Alrbaey, Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel, J. Mater. Eng. Perform., 2014, 23(2), p 518–526.10.1007/s11665-013-0784-8 ↗
47. S. Alvi, K. Saeidi , and F. Akhtar, High Temperature Tribology and Wear of Selective Laser Melted (SLM) 316L Stainless Steel, Wear, 2020, 448–449, p 203228. https://doi.org/10.1016/j.wear.2020.20322810.1016/j.wear.2020.203228 ↗
48. X. Lou, M.A. Othon , and R.B. Rebak, Corrosion Fatigue Crack Growth of Laser Additively-Manufactured 316L Stainless Steel in High Temperature Water, Corros. Sci., 2017, 127, p 120–130.10.1016/j.corsci.2017.08.023 ↗
49. R. Shrestha, J. Simsiriwong , and N. Shamsaei, Fatigue Behavior of Additive Manufactured 316L Stainless Steel Parts: Effects of Layer Orientation and Surface Roughness, Addit. Manuf., 2019, 28, p 23–38. https://doi.org/10.1016/j.addma.2019.04.01110.1016/j.addma.2019.04.011 ↗
50. M.U.F. Khan, T. Larimian, T. Borkar , and R.K. Gupta, Corrosion Behavior and Hardness of Binary Mg Alloys Produced via High-Energy Ball-Milling and Subsequent Spark Plasma Sintering, Corrosion, NACE Int., 2021, 77(2), p 228–241.10.5006/3633 ↗
51. C.S. Witharamage, J. Christudasjustus , and R.K. Gupta, The Effect of Milling Time and Speed on Solid Solubility Grain Size, and Hardness of Al-V Alloys, J. Mater. Eng. Perform., 2021, 30(4), p 3144–3158. https://doi.org/10.1007/s11665-021-05663-x10.1007/s11665-021-05663-x ↗
52. M.U.F. Khan, A. Patil, J. Christudasjustus, T. Borkar , and R.K. Gupta, Spark Plasma Sintering of a High-Energy Ball Milled Mg-10 wt% Al Alloy, Journal of Magnesium and Alloys, National Engg Res. Center for Magnesium Alloys, 2020, 8(2), p 319–328.
53. F. Ozdemir, J. Christudasjustus, V.B. Vukkum, H. Okuyucu , and R.K. Gupta, Need of an Inert Atmosphere for High-Energy Ball Milling of Al Alloys, J. Mater. Eng. Perform., 2022, 32, p 1–7. https://doi.org/10.1007/s11665-022-07309-y10.1007/s11665-022-07309-y ↗
54. F. Ozdemir, C.S. Witharamage, J. Christudasjustus, A.A. Darwish, H. Okuyucu , and R.K. Gupta, Corrosion Behavior of a Bulk Nanocrystalline Al-Fe Alloy, Corros. Sci. Pergamon, 2022, 209, 110727. https://doi.org/10.1016/J.CORSCI.2022.11072710.1016/J.CORSCI.2022.110727 ↗
55. J. Christudasjustus, C.S. Witharamage, G. Walunj, T. Borkar , and R.K. Gupta, The Influence of Spark Plasma Sintering Temperatures on the Microstructure Hardness, and Elastic Modulus of the Nanocrystalline Al-XV Alloys Produced by High-Energy Ball Milling, J. Mater. Sci. Technol., 2022, 122, p 68–76.10.1016/j.jmst.2022.02.008 ↗
56. G. Walunj, A. Bearden, A. Patil, T. Larimian, J. Christudasjustus, R.K. Gupta , and T. Borkar, Mechanical and Tribological Behavior of Mechanically Alloyed Ni-TiC Composites Processed via Spark Plasma Sintering, Mater., Multidiscip. Digit. Publis. Inst., 2020, 13(22), p 1–19. https://doi.org/10.3390/ma1322530610.3390/ma13225306 ↗
57. J. Christudasjustus, M.R. Felde, C.S. Witharamage, J. Esquivel, A.A. Darwish, C. Winkler , and R.K. Gupta, Age-Hardening Behavior Corrosion Mechanisms, and Passive Film Structure of Nanocrystalline Al-V Supersaturated Solid Solution, J. Mater. Sci. Technol., 2023, 135, p 1–12.10.1016/j.jmst.2022.06.044 ↗
58. J. Christudasjustus, M.R. Felde, C.S. Witharamage, J. Esquivel, A.A. Darwish, C. Winkler , and R.K. Gupta, Age-Hardening Behavior, Corrosion Mechanisms, and Passive Film of Nanocrystalline Al-V Alloy Exhibiting Supersaturated Solid Solution, J. Mater. Sci. Technol., 2022, 135, p 1–12.10.1016/j.jmst.2022.06.044 ↗
59. L. Esteves, J. Christudasjustus, S.P. O’Brien, C.S. Witharamage, A.A. Darwish, G. Walunj, P. Stack, T. Borkar, R.E. Akans , and R.K. Gupta, Effect of V Content on Corrosion Behavior of High-Energy Ball Milled AA5083, Corros. Sci., 2021, 186, 109465.10.1016/j.corsci.2021.109465 ↗
60. R. Karunakaran, S. Ortgies, A. Tamayol, F. Bobaru , and M.P. Sealy, Additive Manufacturing of Magnesium Alloys, Bioact. Mater., 2020, 5(1), p 44–54. https://doi.org/10.1016/j.bioactmat.2019.12.00410.1016/j.bioactmat.2019.12.004 ↗
61. R.K. Gupta, D. Fabijanic, T. Dorin, Y. Qiu, J.T. Wang , and N. Birbilis, Simultaneous Improvement in the Strength and Corrosion Resistance of Al via High-Energy Ball Milling and Cr Alloying, Mater. Des., 2015, 84, p 270–276.10.1016/j.matdes.2015.06.120 ↗
62. J. Christudasjustus, C.S. Witharamage, V.B. Vukkum, G. Walunj, T. Borkar , and R.K. Gupta, Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure, J. Electrochem. Soc., 2023, 170(3), p 031508.10.1149/1945-7111/acc7ce ↗
63. J. Christudasjustus, V.B. Vukkum , and R.K. Gupta, Evolution of Surface Film in AA2024-T3 after a Long-Term Immersion in NaCl Solution, Corros. Sci., 2023, 215, p 111056. https://doi.org/10.1016/J.CORSCI.2023.11105610.1016/J.CORSCI.2023.111056 ↗
64. B. AlMangour, Y.K. Kim, D. Grzesiak , and K.A. Lee, Novel TiB2-Reinforced 316L Stainless Steel Nanocomposites with Excellent Room- and High-Temperature Yield Strength Developed by Additive Manufacturing, Compos. B Eng., 2019, 156, p 51–63.10.1016/j.compositesb.2018.07.050 ↗
65. B. AlMangour, D. Grzesiak , and J.M. Yang, Selective Laser Melting of TiB2/316L Stainless Steel Composites: The Roles of Powder Preparation and Hot Isostatic Pressing Post-Treatment, Powder Technol., 2017, 309, p 37–48. https://doi.org/10.1016/j.powtec.2016.12.07310.1016/j.powtec.2016.12.073 ↗
66. O.O. Salman, C. Gammer, J. Eckert, M.Z. Salih, E.H. Abdulsalam, K.G. Prashanth , and S. Scudino, Selective Laser Melting of 316L Stainless Steel: Influence of TiB2 Addition on Microstructure and Mechanical Properties, Mater. Today Commun., 2019, 21, 100615.
67. B. AlMangour, D. Grzesiak , and J.M. Yang, In Situ Formation of TiC-Particle-Reinforced Stainless Steel Matrix Nanocomposites during Ball Milling: Feedstock Powder Preparation for Selective Laser Melting at Various Energy Densities, Powder Technol., 2018, 326, p 467–478. https://doi.org/10.1016/j.powtec.2017.11.06410.1016/j.powtec.2017.11.064 ↗
68. Z. Sun, Y. Xu, F. Chen, L. Shen, X. Tang, L. Sun, M. Fan , and P. Huang, Effects of Ion Irradiation on Microstructure of 316L Stainless Steel Strengthened by Disperse Nano TiC through Selective Laser Melting, Mater Charact, 2021, 180, 111420.
69. S. Zhao, X. Shen, J. Yang, W. Teng , and Y. Wang, Densification Behavior and Mechanical Properties of Nanocrystalline TiC Reinforced 316L Stainless Steel Composite Parts Fabricated by Selective Laser Melting, Opt. Laser Technol., 2018, 103, p 239–250. https://doi.org/10.1016/j.optlastec.2018.01.00510.1016/j.optlastec.2018.01.005 ↗
70. B. AlMangour, D. Grzesiak, T. Borkar, J.Y.-M.& Design, and undefined 2018, Densification Behavior, Microstructural Evolution, and Mechanical Properties of TiC/316L Stainless Steel Nanocomposites Fabricated by Selective Laser Melting, Elsevier, n.d., https://www.sciencedirect.com/science/article/pii/S0264127517309668. Accessed 3 December 2024.10.1016/j.matdes.2017.10.039 ↗
71. B. AlMangour, M. Baek, D. Grzesiak, K.L.-M.S. and, and undefined 2018, Strengthening of Stainless Steel by Titanium Carbide Addition and Grain Refinement during Selective Laser Melting, ElsevierB AlMangour, MS Baek, D Grzesiak, KA LeeMaterials Science and Engineering: A, 2018•Elsevier, n.d., https://www.sciencedirect.com/science/article/pii/S0921509317315976. Accessed 3 December 2024.10.1016/j.msea.2017.11.126 ↗
72. H. Attar, K.G. Prashanth, L.C. Zhang, M. Calin, I.V. Okulov, S. Scudino, C. Yang , and J. Eckert, Effect of Powder Particle Shape on the Properties of in Situ Ti-TiB Composite Materials Produced by Selective Laser Melting, J. Mater. Sci. Technol., 2015, 31(10), p 1001–1005.10.1016/j.jmst.2015.08.007 ↗
73. B. AlMangour, D. Grzesiak, J.Y.-J. of A. and Compounds, and undefined 2016, Rapid Fabrication of Bulk-Form TiB2/316L Stainless Steel Nanocomposites with Novel Reinforcement Architecture and Improved Performance by Selective Laser Melting, ElsevierB AlMangour, D Grzesiak, JM YangJournal of Alloys and Compounds, 2016•Elsevier, n.d., https://www.sciencedirect.com/science/article/pii/S0925838816311355. Accessed 3 December 2024.10.1016/j.jallcom.2016.04.156 ↗
74. S. Srisawadi, D. Tanprayoon, Y. Sato, M. Tsukamoto , and T. Suga, Fabrication of 316L Stainless Steel with TiN Addition by Vacuum Laser Powder Bed Fusion, Opt. Laser Technol., 2020, 126, 106116.10.1016/j.optlastec.2020.106116 ↗
75. D. Tanprayoon, S. Srisawadi, Y. Sato, M. Tsukamoto , and T. Suga, Microstructure and Hardness Response of Novel 316L Stainless Steel Composite with TiN Addition Fabricated by SLM, Opt. Laser Technol., 2020, 129, 106238.10.1016/j.optlastec.2020.106238 ↗
76. A. Nieto, V.B. Vukkum, P. Jalagam, K. Nema, J. Budan, R.K. Gupta , and T.Y. Ansell, 3D Printed Carbon Nanotube Reinforced Stainless Steel via Selective Laser Melting, MRS Commun., 2022, 12(5), p 578–584. https://doi.org/10.1557/s43579-022-00200-w10.1557/s43579-022-00200-w ↗
77. V.B. Vukkum, T.Y. Ansell, A. Nieto , and R.K. Gupta, Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel, JOM, 2024, 76(1), p 232–237.10.1007/s11837-023-06165-y ↗
78. V. Vukkum, J. Christudasjustus, T. Ansell, … A.N.-C., and undefined 2023, Influence of Carbon Nanotubes on Microstructure and Corrosion Performance of Additively Manufactured 316L Stainless Steel, ElsevierVB Vukkum, J Christudasjustus, TY Ansell, A Nieto, RK GuptaCorrosion Science, 2023•Elsevier, n.d., https://www.sciencedirect.com/science/article/pii/S0010938X2300536X. Accessed 3 December 2024.10.2139/ssrn.4482159 ↗
79. C.S.P. Mendonça, A.N.O. Dias, M.L.N.M. Melo, V.A.S. Ribeiro, M.R. da Silva, A.F. Oliveira , and G. Silva, Evaluation of High-Energy Milling Efficiency in Stainless Steel with Addition of Vanadium Carbides, Int. J. Adv. Manuf. Technol., 2018, 95(5–8), p 3093–3099. https://doi.org/10.1007/s00170-017-1297-710.1007/s00170-017-1297-7 ↗
80. T. Gualtieri and A. Bandyopadhyay, Additive Manufacturing of Compositionally Gradient Metal-Ceramic Structures: Stainless Steel to Vanadium Carbide, Mater. Des., 2018, 139, p 419–428. https://doi.org/10.1016/j.matdes.2017.11.00710.1016/j.matdes.2017.11.007 ↗
81. B. Li, B. Qian, Y. Xu, Z. Liu, J. Zhang , and F. Xuan, Additive Manufacturing of Ultrafine-Grained Austenitic Stainless Steel Matrix Composite via Vanadium Carbide Reinforcement Addition and Selective Laser Melting: Formation Mechanism and Strengthening Effect, Mater. Sci. Eng. A, 2018, 2019(745), p 495–508.
82. E.H. Valente, V.K. Nadimpalli, T.L. Christiansen, D.B. Pedersen , and M.A.J. Somers, In-Situ Interstitial Alloying during Laser Powder Bed Fusion of AISI 316 for Superior Corrosion Resistance, Addit. Manufact. Lett., 2021, 1, 100006.
83. O. Salman, A. Funk, A. Waske, J. Eckert, and S. Scudino, Additive Manufacturing of a 316L Steel Matrix Composite Reinforced with CeO2 Particles: Process Optimization by Adjusting the Laser Scanning Speed, Technologies (Basel), 2018, 6(1), p 25.10.3390/technologies6010025 ↗
84. J. Quan, K. Lin, and D. Gu, Selective Laser Melting of Silver Submicron Powder Modified 316L Stainless Steel: Influence of Silver Addition on Microstructures and Performances, Powder Technol., 2020, 364, p 478–483.10.1016/j.powtec.2020.01.082 ↗
85. X. Yin, Q. Zhai, Q. Zhang, K. Wang, L. Meng, Z. Ma, G. Chen, S. Wang , and L. Wang, Effect of Tungsten Particles on Microstructure and Properties of 316 L Stainless Steel Manufactured by Selective Laser Melting, J. Manuf. Process., 2021, 68, p 210–221.10.1016/j.jmapro.2021.05.039 ↗
86. C.L. Wu, S. Zhang, C.H. Zhang, J.B. Zhang, Y. Liu, and J. Chen, Effects of SiC Content on Phase Evolution and Corrosion Behavior of SiC-Reinforced 316L Stainless Steel Matrix Composites by Laser Melting Deposition, Opt. Laser Technol., 2019, 115, p 134–139. https://doi.org/10.1016/j.optlastec.2019.02.02910.1016/j.optlastec.2019.02.029 ↗
87. A. Riquelme, C. de R. Candela, … P.R.-J. of M., and undefined 2022, Influence of Process Parameters in Additive Manufacturing of Highly Reinforced 316L/SiCp Composites, ElsevierA Riquelme, CS de Rojas Candela, P Rodrigo, J RamsJournal of Materials Processing Technology, 2022•Elsevier, n.d., https://www.sciencedirect.com/science/article/pii/S0924013621002855. Accessed 3 December 2024.10.1016/j.jmatprotec.2021.117325 ↗
88. A. Das, V. Yadav, B. AlMangour, … H.P.-M.C. and, and undefined 2023, Additive Manufacturing of Graphene Reinforced 316L Stainless Steel Composites with Tailored Microstructure and Mechanical Properties, ElsevierA Das, V Yadav, B AlMangour, HC Prasad, N Sathish, M Ashiq, AK SrivastavaMaterials Chemistry and Physics, 2023•Elsevier, n.d., https://www.sciencedirect.com/science/article/pii/S0254058423005345. Accessed 3 December 2024.10.1016/j.matchemphys.2023.127826 ↗
89. M. Ghasri-Khouzani, X. Li, A.A. Bogno, Z. Chen, J. Liu, H. Henein, and A.J. Qureshi, Fabrication of Aluminum/Stainless Steel Bimetallic Composites through a Combination of Additive Manufacturing and Vacuum-Assisted Melt Infiltration Casting, J. Manuf. Process., 2021, 69, p 320–330.10.1016/j.jmapro.2021.07.047 ↗
90. G. Sander, D. Jiang, Y. Wu, and N. Birbilis, Exploring the Possibility of a Stainless Steel and Glass Composite Produced by Additive Manufacturing, Mater. Des., 2020, 196, 109179.10.1016/j.matdes.2020.109179 ↗
91. V. Vukkum, T. Sanborn, J. Shepherd, S.S.- Crystals, and undefined 2024, Influence of Spatter on Porosity, Microstructure, and Corrosion of Additively Manufactured Stainless Steel Printed Using Different Island Size, mdpi.comVB Vukkum, T Sanborn, J Shepherd, S Saptarshi, R Basu, T Horn, RK GuptaCrystals, 2024•mdpi.com, n.d., https://www.mdpi.com/2073-4352/14/4/328. Accessed 3 December 2024.10.3390/cryst14040328 ↗
92. M.O. Speidel, Nitrogen Containing Austenitic Stainless Steels, Materwiss Werksttech, 2006, 37(10), p 875–880.10.1002/mawe.200600068 ↗
93. H. Feng, Z. Jiang, H. Li, P. Lu, S. Zhang, H. Zhu, B. Zhang, T. Zhang, D. Xu, and Z. Chen, Influence of Nitrogen on Corrosion Behaviour of High Nitrogen Martensitic Stainless Steels Manufactured by Pressurized Metallurgy, Corros. Sci., 2018, 144(May), p 288–300.10.1016/j.corsci.2018.09.002 ↗
94. J.W. Simmons, Overview: High-Nitrogen Alloying of Stainless Steels, Mater. Sci. Eng. A, 1996, 207(2), p 159–169.10.1016/0921-5093(95)09991-3 ↗
95. H. Baba, T. Kodama, and Y. Katada, Role of Nitrogen on the Corrosion Behavior of Austenitic Stainlesss Steels, Corros. Sci., 2002, 44(10), p 2393–2407.10.1016/S0010-938X(02)00040-9 ↗
96. A. Sadough Vanini, J.P. Audouard, and P. Marcus, The Role of Nitrogen in the Passivity of Austenitic Stainless Steels, Corros. Sci., 1994, 36(11), p 1825–1834.10.1016/0010-938X(94)90021-3 ↗
97. H.J. Grabke, The Role of Nitrogen in the Corrosion of Iron and Steels, ISIJ Int., 1996, 36(7), p 777–786.10.2355/isijinternational.36.777 ↗
98. R. Abdel-Karim, I. Elmahallawi,and K. El-Menshawy, Microstructure and Corrosion Properties of Nitrogen Stainless Steel 316L Produced by Hipping, Powder Metall., 2004, 47(1), p 43–48.10.1179/003258904225015428 ↗
99. W.A. Ghanem, Effect of Nitrogen on the Corrosion Behavior of Austenitic Stainless Steel in Chloride Solutions, In: EUROCORR 2004 - European Corrosion Conference: Long Term Prediction and Modelling of Corrosion, 2004, p 1–8.
100. J. Dai, H. Feng, H.B. Li, Z.H. Jiang, H. Li, S.C. Zhang, P. Zhou, and T. Zhang, Nitrogen Significantly Enhances Corrosion Resistance of 316L Stainless Steel in Thiosulfate-Chloride Solution, Corros. Sci., 2020, 174, 108792.