Mechanical, Tribological, and Corrosion Properties of Selective Laser Melted 316L Stainless Steel
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. M. Fellah, M. Labaïz, O. Assala, A. Iost and L. Dekhil, Tribological Behaviour of AISI 316L Stainless Steel for Biomedical Applications, Tribology-Mater., Surf. Interfaces, 2013, 7(3), p 135–149.10.1179/1751584X13Y.0000000032 ↗
2. B. AlMangour, D. Grzesiak, J. Cheng, and Y. Ertas, Thermal Behavior of the Molten Pool, Microstructural Evolution, and Tribological Performance During Selective Laser Melting of TiC/316L Stainless Steel Nanocomposites: Experimental and Simulation Methods, J. Mater. Process. Technol., 2018, 257, p 288–301.10.1016/j.jmatprotec.2018.01.028 ↗
3. Z. Zou, Z. Liu, L. Yang, Y. Tang, Y. Qiao, and D. Lu, Corrosion Behavior of Different Building Planes of Selective Laser Melting 316L Stainless Steel in 0.1 M HCl Solution, J. Mater. Res. Technol., 2024, 28, p 4738–4753.10.1016/j.jmrt.2024.01.078 ↗
4. K. Benarji, Y. Ravi Kumar, A. Jinoop, C. Paul, and K. Bindra, Effect of Heat-Treatment on the Microstructure, Mechanical Properties and Corrosion Behaviour of SS 316 Structures Built by Laser Directed Energy Deposition Based Additive Manufacturing, Metals Mater. Int., 2021, 27, p 488–499.10.1007/s12540-020-00838-y ↗
5. A. Esmaeili, S.A. Ghaffari, M. Nikkhah, F.M. Ghaini, F. Farzan, and S. Mohammadi, Biocompatibility Assessments of 316L Stainless Steel Substrates Coated by Fe-Based Bulk Metallic Glass Through Electro-Spark Deposition Method, Colloids Surf., B, 2021, 198, 111469.10.1016/j.colsurfb.2020.111469 ↗
6. Q. Chao, V. Cruz, S. Thomas, N. Birbilis, P. Collins, A. Taylor, P.D. Hodgson, and D. Fabijanic, On the Enhanced Corrosion Resistance of a Selective Laser Melted Austenitic Stainless Steel, Scripta Mater., 2017, 141, p 94–98.10.1016/j.scriptamat.2017.07.037 ↗
7. H. Zhou and Q. Fan, 3D Reconstruction and SLM Survey for Dental Implants, J. Mech. Med. Biol., 2017, 17(03), p 1750084.10.1142/S0219519417500841 ↗
8. A. Threlfall, L. Pilkington, K. Milsom, A. Blinkhorn, and M. Tickle, General Dental Practitioners’ Views on the Use of Stainless Steel Crowns to Restore Primary Molars, Br. Dent. J., 2005, 199(7), p 453–455.10.1038/sj.bdj.4812746 ↗
9. N.S. Seale and R. Randall, The Use of Stainless Steel Crowns: a Systematic Literature Review, Pediatr. Dent., 2015, 37(2), p 145–160.
10. F.S. Ludovichetti, E. Stellini, A.G. Signoriello, A. Gracco, and S. Mazzoleni, Zirconia vs. Stainless Steel Pediatric Crowns: a Literature Review, Minerva Dental Oral Sci., 2020, 70(3), p 112–118.
11. J.G. Wall and D.L. Cipra, Alternative Crown Systems: Is the Metal-Ceramic Crown Always the Restoration of Choice?, Dent. Clin. North Am., 1992, 36(3), p 765–782.10.1016/S0011-8532(22)01827-4 ↗
12. M. Ziętala, T. Durejko, M. Polański, I. Kunce, T. Płociński, W. Zieliński, M. Łazińska, W. Stępniowski, T. Czujko, and K.J. Kurzydłowski, The Microstructure, Mechanical Properties and Corrosion Resistance of 316 L Stainless Steel Fabricated Using Laser Engineered Net Shaping, Mater. Sci. Eng., A, 2016, 677, p 1–10.10.1016/j.msea.2016.09.028 ↗
13. A. Röttger, J. Boes, W. Theisen, M. Thiele, C. Esen, A. Edelmann, and R. Hellmann, Microstructure and Mechanical Properties of 316L Austenitic Stainless Steel Processed by Different SLM Devices, Int. J. Adv. Manuf. Technol., 2020, 108, p 769–783.10.1007/s00170-020-05371-1 ↗
14. C.Y. Yap, C.K. Chua, Z.L. Dong, Z.H. Liu, D.Q. Zhang, L.E. Loh, and S.L. Sing, Review of Selective Laser Melting: Materials and Applications, Appl. Phys. Rev., 2015, 2(4), 041101.10.1063/1.4935926 ↗
15. T. Larimian, M. Kannan, D. Grzesiak, B. AlMangour, and T. Borkar, Effect of Energy Density and Scanning Strategy on Densification, Microstructure and Mechanical Properties of 316L Stainless Steel Processed via Selective Laser Melting, Mater. Sci. Eng., A, 2020, 770, 138455.10.1016/j.msea.2019.138455 ↗
16. T. Larimian, B. AlMangour, D. Grzesiak, G. Walunj, and T. Borkar, Effect of Laser Spot Size, Scanning Strategy, Scanning Speed, and Laser Power on Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated via Selective Laser Melting, J. Mater. Eng. Performance, 2021 https://doi.org/10.1007/s11665-021-06387-810.1007/s11665-021-06387-8 ↗
17. B. Şener, O. Çavuşoğlu, and C. Yuce, Effects of Process Parameters on Surface Quality and Mechanical Performance of 316L Stainless Steel Produced by Selective Laser Melting, Optik, 2023, 287, 171050.10.1016/j.ijleo.2023.171050 ↗
18. L. Hao, W. Wang, J. Zeng, M. Song, S. Chang, and C. Zhu, Effect of Scanning Speed and Laser Power on Formability, Microstructure, and Quality of 316L Stainless Steel prepared by Selective Laser Melting, J. Market. Res., 2023, 25, p 3189–3199.
19. A. Adeyemi, E.T. Akinlabi, and R.M. Mahamood, Powder Bed Based Laser Additive Manufacturing Process of Stainless Steel: A Review, Mater. Today: Proc., 2018, 5(9), p 18510–18517.
20. H. Jia, H. Sun, H. Wang, Y. Wu, and H. Wang, Scanning Strategy in Selective Laser Melting (SLM): a Review, Int. J. Adv. Manuf. Technol., 2021, 113, p 2413–2435.10.1007/s00170-021-06810-3 ↗
21. M. Amirjan and H. Sakiani, Effect of Scanning Strategy and Speed on the Microstructure and Mechanical Properties of Selective Laser Melted IN718 Nickel-Based Superalloy, Int. J. Adv. Manuf. Technol., 2019, 103, p 1769–1780.10.1007/s00170-019-03545-0 ↗
22. K. Davidson and S. Singamneni, Selective Laser Melting of Duplex Stainless Steel Powders: an Investigation, Mater. Manuf. Processes, 2016, 31(12), p 1543–1555.10.1080/10426914.2015.1090605 ↗
23. K.P. Davidson, G. Littlefair, and S. Singamneni, On the Machinability of Selective Laser Melted Duplex Stainless Steels, Mater. Manuf. Processes, 2022, 37(12), p 1446–1462.10.1080/10426914.2021.2001513 ↗
24. J.M. Jeon, J.M. Park, J.-H. Yu, J.G. Kim, Y. Seong, S.H. Park, and H.S. Kim, Effects of Microstructure and Internal Defects on Mechanical Anisotropy and Asymmetry of Selective Laser-Melted 316L Austenitic Stainless Steel, Mater. Sci. Eng., A, 2019, 763, 138152.10.1016/j.msea.2019.138152 ↗
25. N.S. Seale, The Use of Stainless Steel Crowns, Pediatr. Dent., 2002, 24(5), p 501–505.
26. B. Zhou, P. Xu, W. Li, Y. Liang, and Y. Liang, Microstructure and Anisotropy of the Mechanical Properties of 316L Stainless Steel Fabricated by Selective Laser Melting, Metals, 2021, 11(5), p 775.10.3390/met11050775 ↗
27. S. Liu, H. Li, C. Qin, R. Zong, and X. Fang, The Effect of Energy Density on Texture and Mechanical Anisotropy in Selective Laser Melted Inconel 718, Mater. Des., 2020, 191, 108642.10.1016/j.matdes.2020.108642 ↗
28. S. Wang, L. Wang, J. Liu, R. Yang, J. Li, and G. Wang, Effects of Laser Energy Density on Morphology Features and Microstructures of the Single Molten Track in Selective Laser Melting, Front. Mater., 2023, 10, p 1110844.10.3389/fmats.2023.1110844 ↗
29. J. Liu, Y. Song, C. Chen, X. Wang, H. Li, J. Wang, K. Guo, and J. Sun, Effect of Scanning Speed on the Microstructure and Mechanical Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Des., 2020, 186, 108355.10.1016/j.matdes.2019.108355 ↗
30. Y. Li, Y. Ge, J. Lei, and W. Bai, Mechanical Properties and Constitutive Model of Selective Laser Melting 316L Stainless Steel at Different Scanning Speeds, Adv. Mater. Sci. Eng., 2022, 2022, p 1–13. https://doi.org/10.1155/2022/290584310.1155/2022/2905843 ↗
31. S. Greco, K. Gutzeit, H. Hotz, B. Kirsch, and J.C. Aurich, Selective Laser Melting (SLM) of AISI 316L—Impact of Laser Power, Layer Thickness, and Hatch Spacing on Roughness, Density, and Microhardness at Constant Input Energy Density, Int. J. Adv. Manuf. Technol, 2020, 108, p 1551–1562.10.1007/s00170-020-05510-8 ↗
32. M. Pant, L. Nagdeve, G. Moona, H. Kumar, and A. Sharma, Tribological Behavior Investigation of 316L Stainless Steel Samples Processed by Selective Laser Melting, Proc. Instit. Mech. Eng., Part J: J. Eng. Tribol, 2023, 237(4), p 718–731.10.1177/13506501221101797 ↗
33. J. Jhabvala, E. Boillat, T. Antignac, and R. Glardon, On the Effect of Scanning Strategies in the Selective Laser Melting Process, Virtual Phys. Prototyping, 2010, 5(2), p 99–109.10.1080/17452751003688368 ↗
34. X. Miao, X. Liu, P. Lu, J. Han, W. Duan, and M. Wu, Influence of Scanning Strategy on the Performances of GO-reinforced Ti6Al4V Nanocomposites Manufactured by SLM, Metals, 2020, 10(10), p 1379.10.3390/met10101379 ↗
35. J. Guan and Q. Wang, The Effect of a Remelting Treatment Scanning Strategy on the Surface Morphology, Defect Reduction Mechanism, and Mechanical Properties of a Selective Laser-Melted Al-Based Alloy, J. Mater. Sci., 2022, 57(21), p 9807–9817.10.1007/s10853-021-06761-w ↗
36. H. Wan, Z. Zhou, C. Li, G. Chen, and G. Zhang, Effect of Scanning Strategy on Mechanical Properties of Selective Laser Melted Inconel 718, Mater. Sci. Eng., A, 2019, 753, p 42–48.10.1016/j.msea.2019.03.007 ↗
37. H. Ali, H. Ghadbeigi, and K. Mumtaz, Effect of Scanning Strategies on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V, Mater. Sci. Eng., A, 2018, 712, p 175–187.10.1016/j.msea.2017.11.103 ↗
38. L. MatWeb, AISI Type 316L Stainless Steel, Annealed Sheet, ed., 2014
39. Y. Wang, L. Lei, L. Shi, H. Wan, F. Liang, and G. Zhang, Scanning Strategy Dependent Tensile Properties of Selective Laser Melted GH4169, Mater. Sci. Eng., A, 2020, 788, 139616.10.1016/j.msea.2020.139616 ↗
40. H.G. Coe and S. Pasebani, Use of Bimodal Particle Size Distribution in Selective Laser Melting of 316L Stainless Steel, J. Manuf. Mater. Proc., 2020, 4(1), p 8.
41. Y. Parikh and M. Kuttolamadom, Property-Graded Stainless Steel 316L by Selective Laser Melting: Characterization & Design, J. Manuf. Sci. Eng., 2023, 145(6), 061008.10.1115/1.4056825 ↗