Corrosion Resistance of CoCrFeNiMox (x = 0.1, 0.3, 0.5) High-Entropy Alloys in Aggressive Aqueous Solutions Containing Cl− or SO42− Ions

1. E.P. George, D. Raabe, and R.O. Ritchie, High-Entropy Alloys, Nat. Rev. Mater., 2019, 4, p 515–534. https://doi.org/10.1038/s41578-019-0121-410.1038/s41578-019-0121-4 ↗

2. M. Tokarewicz and M. Grądzka-Dahlke, Review of Recent Research on AlCoCrFeNi High-Entropy Alloy, Metals, 2021, 11, p 1302. https://doi.org/10.3390/met1108130210.3390/met11081302 ↗

3. Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, and C.C. Tasan, Metastable High-Entropy Dual-Phase Alloys Overcome the Strength-Ductility Trade-Off, Nature, 2016, 534, p 227–230. https://doi.org/10.1038/nature1798110.1038/nature17981 ↗

4. E.P. George, W.A. Curtin, and C.C. Tasan, High Entropy Alloys: A Focused Review of Mechanical Properties and Deformation Mechanisms, Acta Mater., 2020, 188, p 435–474. https://doi.org/10.1016/j.actamat.2019.12.01510.1016/j.actamat.2019.12.015 ↗

5. A.K. Kasar, K. Scalaro, and P.L. Menezes, Tribological Properties of High-entropy Alloys Under Dry Conditions for a Wide Temperature Range—A Review, Materials, 2021, 14, p 5814. https://doi.org/10.3390/ma1419581410.3390/ma14195814 ↗

6. O. Samoilova, N. Shaburova, A. Ostovari Moghaddam, and E. Trofimov, Al0.25CoCrFeNiSi0.6 High Entropy Alloy with High Hardness and Improved Wear Resistance, Mater. Lett., 2022, 328, p 133190. https://doi.org/10.1016/j.matlet.2022.13319010.1016/j.matlet.2022.133190 ↗

7. Y. Shi, B. Yang, and P.K. Liaw, Corrosion-Resistant High-Entropy Alloys: A Review, Metals, 2017, 7, p 43. https://doi.org/10.3390/met702004310.3390/met7020043 ↗

8. Y. Qiu, S. Thomas, M.A. Gibson, H.L. Fraser, and N. Birbilis, Corrosion of High Entropy Alloys, npj Mater. Degrad., 2017, 1, p 15. https://doi.org/10.1038/s41529-017-0009-y10.1038/s41529-017-0009-y ↗

9. S. Jiang, Z. Lin, H. Xu, and Y. Sun, Studies on the Microstructure and Properties of AlxCoCrFeNiTi1-X High Entropy Alloys, J. Alloys Compd., 2018, 741, p 826–833. https://doi.org/10.1016/j.jallcom.2018.01.24710.1016/j.jallcom.2018.01.247 ↗

10. S. Pratskova, O. Samoilova, E. Ageenko, N. Shaburova, A. Ostovari Moghaddam, and E. Trofimov, Corrosion Resistance of AlxCoCrFeNiM (M = Ti, V, Si, Mn, Cu) High Entropy Alloys in NaCl and H2SO4 Solutions, Metals, 2022, 12, p 352. https://doi.org/10.3390/met1202035210.3390/met12020352 ↗

11. B.Y. Li, K. Peng, A.P. Hu, L.P. Zhou, J.J. Zhu, and D.Y. Li, Structure and Properties of FeCoNiCrCu0.5Alx High-Entropy Alloy, Trans. Nonferrous Met. Soc. China, 2013, 23, p 735–741. https://doi.org/10.1016/S1003-6326(13)62523-610.1016/S1003-6326(13)62523-6 ↗

12. X.W. Qiu, Microstructure and Properties of AlCrFeNiCoCu High Entropy Alloy Prepared by Powder Metallurgy, J. Alloys Compd., 2013, 555, p 246–249. https://doi.org/10.1016/j.jallcom.2012.12.07110.1016/j.jallcom.2012.12.071 ↗

13. Y.Y. Liu, Z. Chen, J.C. Shi, Z.Y. Wang, and J.Y. Zhang, The Effect of Al Content on Microstructures and Comprehensive Properties in AlxCoCrCuFeNi High Entropy Alloys, Vacuum, 2019, 161, p 143–149. https://doi.org/10.1016/j.vacuum.2018.12.00910.1016/j.vacuum.2018.12.009 ↗

14. C. Xiang, Z.M. Zhang, H.M. Fu, E.-H. Han, H.F. Zhang, and J.Q. Wang, Microstructure and Corrosion Behavior of AlCoCrFeNiSi0.1 High-Entropy Alloy, Intermetallics, 2019, 114, p 106599. https://doi.org/10.1016/j.intermet.2019.10659910.1016/j.intermet.2019.106599 ↗

15. O. Samoilova, S. Pratskova, N. Shaburova, A. Ostovari Moghaddam, and E. Trofimov, Effect of Au Addition on the Corrosion Behavior of Al0.25CoCrFeNiCu0.25 High-Entropy Alloy in 0.5 M H2SO4 Solution, Mater. Lett., 2023, 350, p 134932. https://doi.org/10.1016/j.matlet.2023.13493210.1016/j.matlet.2023.134932 ↗

16. S.-B. Shin, S.-J. Song, Y.-W. Shin, J.-G. Kim, B.-J. Park, and Y.-C. Suh, Effect of Molybdenum on the Corrosion of Low Alloy Steels in Synthetic Seawater, Mater. Trans., 2016, 57(12), p 2116–2121. https://doi.org/10.2320/matertrans.M201622210.2320/matertrans.M2016222 ↗

17. H.-Y. Ha, T.-H. Lee, J.-H. Bae, and D.W. Chun, Molybdenum Effects on Pitting Corrosion Resistance of FeCrMnMoNC Austenitic Stainless Steels, Metals, 2018, 8, p 653. https://doi.org/10.3390/met808065310.3390/met8080653 ↗

18. Y.L. Chou, J.W. Yeh, and H.C. Shih, The Effect of Molybdenum on the Corrosion Behaviour of the High-Entropy Alloys Co1.5CrFeNi1.5Ti0.5Mox in Aqueous Environments, Corr. Sci., 2010, 52, p 2571–2581. https://doi.org/10.1016/j.corsci.2010.04.00410.1016/j.corsci.2010.04.004 ↗

19. Y.L. Chou, Y.C. Wang, J.W. Yeh, and H.C. Shih, Pitting Corrosion of the High-Entropy Alloy Co1.5CrFeNi1.5Ti0.5Mo0.1 in Chloride-Containing Sulphate Solutions, Corr. Sci., 2010, 52, p 3481–3491. https://doi.org/10.1016/j.corsci.2010.06.02510.1016/j.corsci.2010.06.025 ↗

20. C. Shang, E. Axinte, J. Sun, X. Li, P. Li, J. Du, P. Qiao, and Y. Wang, CoCrFeNi(W1–xMox) High-Entropy Alloy Coatings with Excellent Mechanical Properties and Corrosion Resistance Prepared by Mechanical Alloying and Hot Pressing Sintering, Mater. Des., 2017, 117, p 193–202. https://doi.org/10.1016/j.matdes.2016.12.07610.1016/j.matdes.2016.12.076 ↗

21. A.A. Rodriguez, J.H. Tylczak, M.C. Gao, P.D. Jablonski, M. Detrois, M. Ziomek-Moroz, and J.A. Hawk, Effect of Molybdenum on the Corrosion Behavior of High-Entropy Alloys CoCrFeNi2 and CoCrFeNi2Mo0.25 under Sodium Chloride Aqueous Conditions, Adv. Mater. Sci. Eng., 2018, 2018, p 3016304. https://doi.org/10.1155/2018/301630410.1155/2018/3016304 ↗

22. X. Wang, D. Mercier, Y. Danard, T. Rieger, L. Perrière, M. Laurent-Brocq, I. Guillot, V. Maurice, and P. Marcus, Enhanced Passivity of Cr-Fe-Co-Ni-Mo Multi-Component Single-Phase Face-Centred Cubic Alloys: Design, Production and Corrosion Behavior, Corros. Sci., 2022, 200, p 110233. https://doi.org/10.1016/j.corsci.2022.11023310.1016/j.corsci.2022.110233 ↗

23. J.M. Zhu, H.M. Fu, H.F. Zhang, A.M. Wang, H. Li, and Z.Q. Hu, Microstructures and Compressive Properties of Multicomponent AlCoCrFeNiMox Alloys, Mater. Sci. Eng. A, 2010, 527, p 6975–6979. https://doi.org/10.1016/j.msea.2010.07.02810.1016/j.msea.2010.07.028 ↗

24. C.-Y. Hsu, T.-S. Sheu, J.-W. Yeh, and S.-K. Chen, Effect of Iron Content on Wear Behavior of AlCoCrFexMo0.5Ni High-Entropy Alloys, Wear, 2010, 268, p 653–659. https://doi.org/10.1016/j.wear.2009.10.01310.1016/j.wear.2009.10.013 ↗

25. Y. Dong, Y. Lu, J. Kong, J. Znang, and T. Li, Microstructure and Mechanical Properties of Multi-component AlCrFeNiMox High-Entropy Alloys, J. Alloy. Compd., 2013, 573, p 96–101. https://doi.org/10.1016/j.jallcom.2013.03.25310.1016/j.jallcom.2013.03.253 ↗

26. Y.X. Zhuang, X.L. Zhang, and X.Y. Gu, Effect of Molybdenum on Phases, Microstructure and Mechanical Properties of Al0.5CoCrFeMoxNi High Entropy Alloys, J. Alloys Compd., 2018, 743, p 514–522. https://doi.org/10.1016/j.jallcom.2018.02.00310.1016/j.jallcom.2018.02.003 ↗

27. R.A. Swalin, Thermodynamics of Solids, 2nd ed. Wiley, New York, 1972, p 400

28. B. Straumal and I. Konyashin, WC-Based Cemented Carbides with High Entropy Alloyed Binders: A Review, Metals, 2023, 13, p 171. https://doi.org/10.3390/met1301017110.3390/met13010171 ↗

29. B. Straumal, N. Khrapova, A. Druzhinin, K. Tsoy, G. Davdian, V. Orlov, G. Gerstein, and A. Straumal, Grain Boundary Wetting Transition in the Mg-Based ZEK 100 Alloy, Crystals, 2023, 13, p 1538. https://doi.org/10.3390/cryst1311153810.3390/cryst13111538 ↗

30. A.F. Guillermet, The Fe-Mo (Iron-Molybdenum) System, Bull. Alloy Phase Diagr., 1982, 3(3), p 359–367. https://doi.org/10.1007/BF0286931510.1007/BF02869315 ↗

31. A. Jacob, E. Povoden-Karadeniz, and E. Kozeschnik, Revised Thermodynamic Description of the Fe-Cr System Based on an Improved Sublattice Model of the σ Phase, Calphad, 2018, 60, p 16–28. https://doi.org/10.1016/j.calphad.2017.10.00210.1016/j.calphad.2017.10.002 ↗

32. M. Venkatraman and J.P. Neumann, The Cr-Mo (Chromium-Molybdenum) System, Bull. Alloy Phase Diagr., 1987, 8(3), p 216–220. https://doi.org/10.1007/BF0287491110.1007/BF02874911 ↗

33. R. Silva, C.L. Kugelmeier, G.S. Vacchi, C.B. Martins Junior, I. Dainezi, C.R.M. Afonso, A.A. Mendes Filho, and C.A.D. Rovere, A Comprehensive Study of the Pitting Corrosion Mechanism of Lean Duplex Stainless Steel Grade 2404 Aged at 475°C, Corr. Sci., 2021, 191, p 109738. https://doi.org/10.1016/j.corsci.2021.10973810.1016/j.corsci.2021.109738 ↗

34. C.A. Della Rovere, J.H. Alano, R. Silva, P.A.P. Nascente, J. Otubo, and S.E. Kuri, Characterization of Passive Films on Shape Memory Stainless Steels, Corr. Sci., 2012, 57, p 154–161. https://doi.org/10.1016/j.corsci.2011.12.02210.1016/j.corsci.2011.12.022 ↗

35. O. Samoilova, S. Pratskova, N. Shaburova, A. Ostovari Moghaddam, and E. Trofimov, Corrosion Resistance of Al0.5CoCrFeNiCuxAgy (x = 0.25, 0.5; y = 0, 0.1) High-Entropy Alloys in 0.5M H2SO4 Solution, Materials, 2023, 16(9), p 3585. https://doi.org/10.3390/ma1609358510.3390/ma16093585 ↗

36. Y.F. Kao, T.D. Lee, S.K. Chen, and Y.S. Chang, Electrochemical Passive Properties of AlxCoCrFeNi (x = 0, 0.25, 0.50, 1.00) Alloys in Sulfuric Acids, Corr. Sci., 2010, 52, p 1026–1034. https://doi.org/10.1016/j.corsci.2009.11.02810.1016/j.corsci.2009.11.028 ↗

37. D.H. Xiao, P.F. Zhou, W.Q. Wu, H.Y. Diao, M.C. Gao, M. Song, and P.K. Liaw, Microstructure, Mechanical and Corrosion Behaviors of AlCoCuFeNi-(Cr, Ti) High Entropy Alloys, Mater. Des., 2017, 116, p 438–447. https://doi.org/10.1016/j.matdes.2016.12.03610.1016/j.matdes.2016.12.036 ↗

38. C.P. Lee, C.C. Chang, Y.Y. Chen, J.W. Yeh, and H.C. Shih, Effect of Aluminium Content of AlxCrFe1.5MnNi0.5 High–Entropy Alloys on the Corrosion Behaviour in Aqueous Environments, Corr. Sci., 2008, 50, p 2053–2060. https://doi.org/10.1016/j.corsci.2008.04.01110.1016/j.corsci.2008.04.011 ↗

39. C.A. Della Rovere, J.H. Alano, J. Otubo, and S.E. Kuri, Corrosion Behavior of Shape Memory Stainless Steel in Acid Media, J. Alloys Compd., 2011, 509, p 5376–5380. https://doi.org/10.1016/j.jallcom.2011.02.05110.1016/j.jallcom.2011.02.051 ↗

40. C.A. Della Rovere, J.H. Alano, R. Silva, P.A.P. Nascente, J. Otubo, and S.E. Kuri, Influence of Alloying Elements on the Corrosion Properties of Shape Memory Stainless Steels, Mater. Chem. Phys., 2012, 133, p 668–673. https://doi.org/10.1016/j.matchemphys.2012.01.04910.1016/j.matchemphys.2012.01.049 ↗

41. R. Silva, G.S. Vacchi, C.L. Kugelmeier, I.G.R. Santos, A.A. Mendes Filho, D.C.C. Magalhães, C.R.M. Afonso, V.L. Sordi, and C.A.D. Rovere, New Insights into the Hardening and Pitting Corrosion Mechanisms of Thermally Aged Duplex Stainless Steel at 475 °C: A Comparative Study Between 2205 and 2101 Steels, J. Mater. Sci. Technol., 2022, 98, p 123–135. https://doi.org/10.1016/j.jmst.2021.04.04610.1016/j.jmst.2021.04.046 ↗