Comparative Analysis of Predictive Modeling Techniques for Mechanical Properties in Dissimilar Friction Stir Welding of AA6061 and AZ31B
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. S. Dharmalingam, K. Lenin, and D. Srinivasan, Investigating the FSW Parameter’s Role on Microstructure and Mechanical Properties of Welding AZ31B–AA8110 Alloy, Bull. Pol. Acad. Sci. Tech. Sci., 2021 https://doi.org/10.24425/bpasts.2022.14009810.24425/bpasts.2022.140098 ↗
2. S. Yaknesh et al., Mechanical and Microstructural Investigation on AZ91B Mg Alloys with Tool Tilt Variation by Friction Stir Welding, Adv. Mater. Sci. Eng., 2022, 2022, p 1–14. https://doi.org/10.1155/2022/831141310.1155/2022/8311413 ↗
3. S. Verma and V. Kumar, Optimization of Friction Stir Welding Parameters of Dissimilar Aluminium Alloys 6061 and 5083 by Using Response Surface Methodology. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235, (23), 7009–7020, 2021. https://doi.org/10.1177/09544062211005804.10.1177/09544062211005804 ↗
4. S. Yaknesh, P. Sevvel, K. Sampathkumar, I. John Solomon, and N. Rajamurugu, Tilt Angle Impact on Strength, Microstructure of Friction Stir Welded AZ91CMg Plates, Mater. Sci. Technol., 2023, 39(5), p 613–622. https://doi.org/10.1080/02670836.2022.213052510.1080/02670836.2022.2130525 ↗
5. S. Yaknesh, K. Sampathkumar, and P. Sevvel, Effect of Tool Pin Geometry and Process Parameters During FSW of Dissimilar Alloys of Mg, Mater. Res., 2022 https://doi.org/10.1590/1980-5373-mr-2021-050810.1590/1980-5373-mr-2021-0508 ↗
6. G. Çam, G. İpekoğlu, and H. Tarık Serindağ, Effects of use of Higher Strength Interlayer and External Cooling on Properties of Friction Stir Welded AA6061-T6 Joints, Sci. Technol. Weld. Join., 2014, 19(8), p 715–720. https://doi.org/10.1179/1362171814Y.000000024710.1179/1362171814Y.0000000247 ↗
7. T. Küçükömeroğlu, S. M. Aktarer, and G. Çam, Investigation of mechanical and microstructural properties of friction stir welded dual phase (DP) steel. In: IOP Conference Series Material Science Engineering, vol. 629, no. 1, p 012010, 2019. https://doi.org/10.1088/1757-899X/629/1/01201010.1088/1757-899X/629/1/012010 ↗
8. G. Çam, Friction Stir Welded Structural Materials: Beyond Al-Alloys, Int. Mater. Rev., 2011, 56(1), p 1–48. https://doi.org/10.1179/095066010X1277720587575010.1179/095066010X12777205875750 ↗
9. G. Çam and G. İpekoğlu, Recent Developments in Joining of Aluminum Alloys, Int. J. Adv. Manuf. Technol., 2017, 91(5–8), p 1851–1866. https://doi.org/10.1007/s00170-016-9861-010.1007/s00170-016-9861-0 ↗
10. J. Mohammadi et al., Friction Stir Welding Joint of Dissimilar Materials Between AZ31B Magnesium and 6061 Aluminum Alloys: Microstructure Studies and Mechanical Characterizations, Mater. Charact., 2015, 101, p 189–207. https://doi.org/10.1016/j.matchar.2015.01.00810.1016/j.matchar.2015.01.008 ↗
11. G. Çam, V. Javaheri, and A. Heidarzadeh, Advances in FSW and FSSW of Dissimilar Al-Alloy Plates, J. Adhes. Sci. Technol., 2023, 37(2), p 162–194. https://doi.org/10.1080/01694243.2022.202807310.1080/01694243.2022.2028073 ↗
12. N. Kashaev, V. Ventzke, and G. Çam, Prospects of Laser Beam Welding and Friction Stir Welding Processes for Aluminum Airframe Structural Applications, J. Manuf. Process., 2018, 36, p 571–600. https://doi.org/10.1016/j.jmapro.2018.10.00510.1016/j.jmapro.2018.10.005 ↗
13. M.M.Z. Ahmed, M.M. El-Sayed Seleman, D. Fydrych, and G. Çam, Friction Stir Welding of Aluminum in the Aerospace Industry: The Current Progress and State-of-the-Art Review, Materials, 2023, 16(8), p 2971. https://doi.org/10.3390/ma1608297110.3390/ma16082971 ↗
14. P. Pitchipoo, A. Muthiah, K. Jeyakumar, and A. Manikandan, Friction Stir Welding Parameter Optimization Using Novel Multi Objective Dragonfly Algorithm, Int. J. Lightw. Mater. Manuf., 2021, 4(4), p 460–467. https://doi.org/10.1016/j.ijlmm.2021.06.00610.1016/j.ijlmm.2021.06.006 ↗
15. A. Heidarzadeh et al., Friction Stir Welding/Processing of Metals and Alloys: A Comprehensive Review on Microstructural Evolution, Prog. Mater. Sci., 2021, 117, p 100752. https://doi.org/10.1016/j.pmatsci.2020.10075210.1016/j.pmatsci.2020.100752 ↗
16. B. Fu, G. Qin, F. Li, X. Meng, J. Zhang, and C. Wu, Friction Stir Welding Process of Dissimilar Metals of 6061–T6 Aluminum Alloy to AZ31B Magnesium Alloy, J. Mater. Process. Technol., 2015, 218, p 38–47. https://doi.org/10.1016/j.jmatprotec.2014.11.03910.1016/j.jmatprotec.2014.11.039 ↗
17. U. Abdul Khaliq et al., A Review on Friction Stir Butt Welding of Aluminum with Magnesium: A New Insight on Joining Mechanisms by Interfacial Enhancement, J. Mater. Res. Technol., 2023, 27, p 4595–4624. https://doi.org/10.1016/j.jmrt.2023.10.15810.1016/j.jmrt.2023.10.158 ↗
18. M.M.Z. Ahmed, M.M. El-Sayed Seleman, D. Fydrych, and G. Cam, Review on Friction Stir Welding of Dissimilar Magnesium and Aluminum Alloys: Scientometric Analysis and Strategies for Achieving High-Quality Joints, J. Magnes. Alloys, 2023, 11(11), p 4082–4127. https://doi.org/10.1016/j.jma.2023.09.03910.1016/j.jma.2023.09.039 ↗
19. J. Verma, R.V. Taiwade, C. Reddy, and R.K. Khatirkar, Effect of Friction Stir Welding Process Parameters on Mg-AZ31B/Al-AA6061 Joints, Mater. Manuf. Process., 2018, 33(3), p 308–314. https://doi.org/10.1080/10426914.2017.129195710.1080/10426914.2017.1291957 ↗
20. V. Sarila, H.P. Koneru, M. Cheepu, B.K. Chigilipalli, V.C. Kantumuchu, and M. Shanmugam, Microstructural and Mechanical Properties of AZ31B to AA6061 Dissimilar Joints Fabricated by Refill Friction Stir Spot Welding, J. Manuf. Mater. Process., 2022 https://doi.org/10.3390/jmmp605009510.3390/jmmp6050095 ↗
21. N.R.J. Hynes et al., An Experimental Insight of Friction Stir Welding of Dissimilar AA 6061/Mg AZ 31 B Joints. In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022, vol. 236, no. 6–7, pp 787–797. https://doi.org/10.1177/09544054211043474.10.1177/09544054211043474 ↗
22. K.P. Mehta, P. Carlone, A. Astarita, F. Scherillo, F. Rubino, and P. Vora, Conventional and Cooling Assisted Friction Stir Welding of AA6061 and AZ31B Alloys, Mater. Sci. Eng. A, 2019, 759, p 252–261. https://doi.org/10.1016/j.msea.2019.04.12010.1016/j.msea.2019.04.120 ↗
23. B. Eren, M.A. Guvenc, and S. Mistikoglu, Artificial Intelligence Applications for Friction Stir Welding: A Review, Met. Mater. Int., 2021, 27(2), p 193–219. https://doi.org/10.1007/s12540-020-00854-y10.1007/s12540-020-00854-y ↗
24. M. Fakkir Mohamed, S. Yaknesh, C. M. Anantha Kumar, J. Godwin Rajadurai, S. Janarthanan, and A. V. S. Vignes, Optimization of friction stir welding parameters for enhancing welded joints strength using Taguchi based grey relational analysis. In: Material Today Proceedings, 2021, vol. 39, pp. 676–681. https://doi.org/10.1016/j.matpr.2020.09.188.10.1016/j.matpr.2020.09.188 ↗
25. W. Hu, Z. Ma, S. Ji, S. Qi, M. Chen, and W. Jiang, Improving the Mechanical Property of Dissimilar Al/Mg Hybrid Friction Stir Welding Joint by PIO-ANN, J. Mater. Sci. Technol., 2020, 53, p 41–52. https://doi.org/10.1016/j.jmst.2020.01.06910.1016/j.jmst.2020.01.069 ↗
26. J. Anbarasi, S. Yaknesh, K. Sampathkumar, and N. Rajamurugu, Performance Characteristics Optimization in Dissimilar Friction Stir Welding Using Grey Relational Analysis. In: Material Today Proceedings, 2022, vol. 55, pp. 294–298. https://doi.org/10.1016/j.matpr.2021.07.302.10.1016/j.matpr.2021.07.302 ↗
27. M.A. Bezerra, R.E. Santelli, E.P. Oliveira, L.S. Villar, and L.A. Escaleira, Response Surface Methodology (RSM) as a Tool for Optimization in Analytical Chemistry, Talanta, 2008, 76(5), p 965–977. https://doi.org/10.1016/j.talanta.2008.05.01910.1016/j.talanta.2008.05.019 ↗
28. S. Yaknesh et al., A Technical Perspective on Integrating Artificial Intelligence to Solid-State Welding, Int. J. Adv. Manuf. Technol., 2024, 132(9–10), p 4223–4248. https://doi.org/10.1007/s00170-024-13524-910.1007/s00170-024-13524-9 ↗
29. H. Tagimalek, M.R. Maraki, M. Mahmoodi, H.K. Moghaddam, and S. Farzad-Rik, Prediction of Mechanical Properties and Hardness of Friction Stir Welding of Al 5083/pure Cu Using ANN, ICA and PSO Model, SN Appl. Sci., 2022, 4(4), p 102. https://doi.org/10.1007/s42452-022-04989-y10.1007/s42452-022-04989-y ↗
30. D. Jayabalakrishnan and M. Balasubramanian, Friction Stir Weave Welding (FSWW) of AA6061 Aluminium Alloy with a Novel Tool-Path Pattern, Aust. J. Mech. Eng., 2019, 17(2), p 133–144. https://doi.org/10.1080/14484846.2017.137358410.1080/14484846.2017.1373584 ↗
31. M. Vahdati, M. Moradi, and M. Shamsborhan, Modeling and Optimization of the Yield Strength and Tensile Strength of Al7075 Butt Joint Produced by FSW and SFSW Using RSM and Desirability Function Method, Trans. Indian Inst. Met., 2020, 73(10), p 2587–2600. https://doi.org/10.1007/s12666-020-02075-810.1007/s12666-020-02075-8 ↗
32. K.P. Vasantha Kumar and M. Balasubramanian, Optimization of FSW Processing Factors on Hardness for Dissimilar AA6061-T6 and AZ31B O Alloys, Strojniški vestnik J. Mech. Eng., 2022, 68(3), p 166–174. https://doi.org/10.5545/sv-jme.2021.731610.5545/sv-jme.2021.7316 ↗
33. Q. Song, H. Wang, S. Ji, Z. Ma, W. Jiang, and M. Chen, Improving Joint Quality of Hybrid Friction Stir Welded Al/Mg Dissimilar alloys by RBFNN-GWO System, J. Manuf. Process., 2020, 59, p 750–759. https://doi.org/10.1016/j.jmapro.2020.10.03710.1016/j.jmapro.2020.10.037 ↗
34. A. Mishra and A. Dasgupta, Supervised and Unsupervised Machine Learning Algorithms for Forecasting the Fracture Location in Dissimilar Friction-Stir-Welded Joints, Forecasting, 2022, 4(4), p 787–797. https://doi.org/10.3390/forecast404004310.3390/forecast4040043 ↗
35. S.N. Sachinkumar, D. Chakradhar, and S. Narendranath, Analysis of the Effect of Friction Stir Welding Parameters on Characteristics of AA6061 Composites Using Response Surface Methodology, Trans. Indian Inst. Metals, 2021, 74(6), p 1303–1319. https://doi.org/10.1007/s12666-021-02214-910.1007/s12666-021-02214-9 ↗
36. A. Asmare, R. Al-Sabur, and E. Messele, Experimental Investigation of Friction Stir Welding on 6061–t6 Aluminum Alloy Using Taguchi-Based Gra, Metals (Basel), 2020, 10(11), p 1–21. https://doi.org/10.3390/met1011148010.3390/met10111480 ↗
37. K.P. Vasantha Kumar, M. Balasubramanian, and K. Arumugam, Multiple Response Optimization of Dissimilar Friction Stir Welding on 6061–T6 Aluminum Alloy and AZ31B Magnesium Alloy, Mater. Sci. Forum, 2023, 1110, p 125–132. https://doi.org/10.4028/p-e8afwB10.4028/p-e8afwB ↗
38. S. Beg and S. Akhter, Box–Behnken Designs and Their Applications in Pharmaceutical Product Development, Design of Experiments for Pharmaceutical Product Development. Springer Singapore, Singapore, 2021, p 77–8510.1007/978-981-33-4717-5_7 ↗
39. S. Aneja, A. Sharma, R. Gupta, and D.-Y. Yoo, Bayesian Regularized Artificial Neural Network Model to Predict Strength Characteristics of Fly-Ash and Bottom-Ash Based Geopolymer Concrete, Materials, 2021, 14(7), p 1729. https://doi.org/10.3390/ma1407172910.3390/ma14071729 ↗
40. S. Bhatnagar, G. Kumar, H. Mehdi, and M. Kumar, Optimization of FSW Parameters for Enhancing Dissimilar Joint Strength of AA7050 and AA6061 Using Response Surface Methodology (RSM). In: Material Today Proceedings, 2023. https://doi.org/10.1016/j.matpr.2023.04.144.10.1016/j.matpr.2023.04.144 ↗
41. W. Safeen, S. Hussain, A. Wasim, M. Jahanzaib, H. Aziz, and H. Abdalla, Predicting the Tensile Strength, Impact Toughness, and Hardness of Friction Stir-Welded AA6061-T6 Using Response Surface Methodology, Int. J. Adv. Manuf. Technol., 2016, 87(5–8), p 1765–1781. https://doi.org/10.1007/s00170-016-8565-910.1007/s00170-016-8565-9 ↗
42. S. Ugender, A. Kumar, and A. S. Reddy, Microstructure and Mechanical Properties of AZ31B Magnesium Alloy by Friction Stir Welding. In: Procedia Materials Science, 2014, vol. 6, pp 1600–1609. https://doi.org/10.1016/j.mspro.2014.07.143.10.1016/j.mspro.2014.07.143 ↗
43. R.S. Sidhu et al., Joining of Dissimilar Al and Mg Metal Alloys by Friction Stir Welding, Materials, 2022, 15(17), p 5901. https://doi.org/10.3390/ma1517590110.3390/ma15175901 ↗
44. S. Yaknesh, K. Sampathkumar, P. Sevvel, and I. John Solomon, Generation of Force and Torque During Joining of AZ91C plates by FSW Under Distinctive Tool Tilt Angle and Their Impact on Mechanical Strength and Micro-Structure, J. Adhes. Sci. Technol., 2023, 37(6), p 1071–1090. https://doi.org/10.1080/01694243.2022.205776310.1080/01694243.2022.2057763 ↗
45. S. Saravanakumar, S. Gopalakrishnan, K. Kalaiselvan, and K. B. Prakash, Microstructure and mechanical properties of Cu/RHA composites fabricated by friction stir processing. In: Mater Today Proceedings, 2021, vol. 45, pp. 879–883. https://doi.org/10.1016/j.matpr.2020.02.935.10.1016/j.matpr.2020.02.935 ↗
46. S. Saravanakumar et al., Optimizing Friction Stir Processing Parameters for Aluminium Alloy 2024 Reinforced with SiC Particles: A Taguchi Approach of Investigation, J. Market. Res., 2024, 30, p 4847–4855. https://doi.org/10.1016/j.jmrt.2024.04.06610.1016/j.jmrt.2024.04.066 ↗
47. S. Jeyakrishnan, S. Vijayakumar, M.N. Swapna Sri, and P. Anusha, An Integration of RSM and ANN Modelling Approach for Prediction of FSW Joint Properties in AA7178/AA5456 Alloys, Can. Metall. Q., 2024 https://doi.org/10.1080/00084433.2024.231034410.1080/00084433.2024.2310344 ↗
48. B. Bora, R. Kumar, S. Chattopadhyaya, and S. Borucki, Analysis of Variance of Dissimilar Cu-Al Alloy Friction Stir Welded Joints with Different Offset Conditions, Appl. Sci., 2021, 11(10), p 4604. https://doi.org/10.3390/app1110460410.3390/app11104604 ↗
49. A. Afzal, S.A. Khan, T. Islam, R.D. Jilte, A. Khan, and M.E.M. Soudagar, Investigation and Back-Propagation Modeling of Base Pressure at Sonic and Supersonic Mach Numbers, Phys. Fluids, 2020, 32, p 096109. https://doi.org/10.1063/5.002201510.1063/5.0022015 ↗
50. A. Afzal, J.K. Bhutto, A. Alrobaian, A.R. Kaladgi, and S.A. Khan, Modelling and Computational Experiment to Obtain Optimized Neural Network for Battery Thermal Management Data, Energies, 2021, 14, p 7370. https://doi.org/10.3390/en1421737010.3390/en14217370 ↗
51. I. Mokashi, A. Afzal, S.A. Khan, N.A. Abdullah, M.H. Bin Azami, R.D. Jilte, and O.D. Samuel, Nusselt Number Analysis from a Battery Pack Cooled by Different Fluids and Multiple Back-Propagation Modelling Using Feed-Forward Networks, Int. J. Therm. Sci., 2021 https://doi.org/10.1016/j.ijthermalsci.2020.10673810.1016/j.ijthermalsci.2020.106738 ↗
52. A. Afzal, C.A. Saleel, I.A. Badruddin, T.M.Y. Khan, S. Kamangar, Z. Mallick, O.D. Samuel, and M.E.M. Soudagar, Human Thermal Comfort in Passenger Vehicles Using an Organic Phase Change Material– an Experimental Investigation, Neural Network Modelling, and Optimization, Build. Environ., 2020, 180, p 107012. https://doi.org/10.1016/j.buildenv.2020.10701210.1016/j.buildenv.2020.107012 ↗
53. A. Afzal, R.G. Roy, C.P. Koshy, Y. Alex, M. Abbas, E. Cuce, R.K.A. Razak, S. Shaik, and C.A. Saleel, Characterization of Biodiesel Based on Plastic Pyrolysis Oil (PPO) and Coconut Oil: Performance and Emission Analysis Using RSM-ANN Approach, Sustain. Energy Technol. Assess., 2023, 56, p 103046. https://doi.org/10.1016/j.seta.2023.10304610.1016/j.seta.2023.103046 ↗