DataVXJournal of Materials Engineering and PerformancePaper
journal article·2025-03

Effect of Sintering Temperature on Microstructure and Properties of PcBN Composites

Qin Zou, Peihang Dong, Yanguo Li, Shijie Li, Lifeng Dai, Di Wu, Yongan Luo

Journal of Materials Engineering and Performance· Volume 34· Issue 5
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Ceramics & glassesComposites

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. W. Wang, Z. Li, Y. Zhu, X. Zhang, and X. Wei, Effect of Diamond Additive on the Properties of cBN Composites with Al–Si as Binder by HTHP Sintering, Ceram. Int., 2022, 48(19), p 28830–28834. https://doi.org/10.1016/j.ceramint.2022.03.02810.1016/j.ceramint.2022.03.028 ↗
2. S. Wang, Z. Li, Y. Zhu, P. Huang, W. Wang, X. Zhang, and X. Wei, Enhanced Mechanical Properties of cBN-Al-Si3N4 Composites by Introducing Diamond, Diam. Relat. Mater., 2022, 121, p 108808. https://doi.org/10.1016/j.diamond.2021.10880810.1016/j.diamond.2021.108808 ↗
3. L. Chen, J.-E. Stahl, W. Zhao, and J. Zhou, Assessment on Abrasiveness of High Chromium Cast Iron Material on the Wear Performance of PCBN Cutting Tools in Dry Machining, J. Mater. Process. Technol., 2018, 255, p 110–120. https://doi.org/10.1016/j.jmatprotec.2017.11.05410.1016/j.jmatprotec.2017.11.054 ↗
4. R. Kumar, M. Antonov, P. Klimczyk, V. Mikli, and D. Gomon, Effect of cBN Content and Additives on Sliding and Surface Fatigue Wear of Spark Plasma Sintered Al2O3-cBN Composites, Wear, 2022, 494–495, p 204250. https://doi.org/10.1016/j.wear.2022.20425010.1016/j.wear.2022.204250 ↗
5. H. Ji, Z. Li, and M. Liu, Structural and Mechanical Properties of cBN Composites by Regulating Particle Size Distribution and Holding Time, Int. J. Refract. Met. Hard Mater., 2021, 100, p 105635. https://doi.org/10.1016/j.ijrmhm.2021.10563510.1016/j.ijrmhm.2021.105635 ↗
6. Y. Liu, A. Sun, S. Zhong, P. Mo, and Y. Wu, Effect of Al Ti Content on Mechanical Properties of in-Situ Synthesized PcBN Composites, Diam. Relat. Mater., 2020, 109, p 108068. https://doi.org/10.1016/j.diamond.2020.10806810.1016/j.diamond.2020.108068 ↗
7. Q. Zou, H. Wu, Y. Li, X. Wang, L. Dai, and Y. Luo, Effects of Carbon Nanotubes and Sintering Parameters on Microstructure and Properties of PCD, Diam. Relat. Mater., 2022, 128, p 109293. https://doi.org/10.1016/j.diamond.2022.10929310.1016/j.diamond.2022.109293 ↗
8. P. Mo, C. Chen, G. Jia, J. Chen, D. Xie, L. Xiao, X. Pan, and F. Lin, Effect of Tungsten Content on Microstructure and Mechanical Properties of PCBN Synthesized in cBN-Ti-Al-W System, Int. J. Refract. Met. Hard Mater., 2020, 87, p 105138. https://doi.org/10.1016/j.ijrmhm.2019.10513810.1016/j.ijrmhm.2019.105138 ↗
9. S. Kateryna, B. Volodymyr, S. Denys, P. Igor, C. Antionette, T. Vladimir, S. Jan-Eric, and L. Filip, Multicomponent Binders for PcBN Performance Enhancement in Cutting Tool Applications, J. Eur. Ceram. Soc., 2022, 42(11), p 4513–4527. https://doi.org/10.1016/j.jeurceramsoc.2022.04.02210.1016/j.jeurceramsoc.2022.04.022 ↗
10. J. Chen, L. Sun, T. Jin, K. Luo, Z. Zhao, and Y. Tian, Binderless Layered BN Toughened cBN for Ultra-precision Cutting, J. Inorg. Mater., 2022, 37(6), p 623–628. https://doi.org/10.15541/jim2021030010.15541/jim20210300 ↗
11. S. Chen, H. Fan, Y. Su, W. Li, J. Li, B. Yan, J. Song, L. Hu, and Y. Zhang, Influence of Binder Systems on Sintering Characteristics, Microstructures, and Mechanical Properties of PcBN Composites Fabricated by SPS, J. Adv. Ceram., 2022, 11(2), p 321–330. https://doi.org/10.1007/s40145-021-0536-410.1007/s40145-021-0536-4 ↗
12. S. Gordon, J.-J. Roa, T. Rodriguez-Suarez, R. M’Saoubi, E. Jiménez-Piqué, L.-F.-P. Franca, and L. Llanes, Influence of Microstructural Assemblage of the Substrate on the Adhesion Strength of Coated PcBN Grades, Ceram. Int., 2022, 48(15), p 22354–22363. https://doi.org/10.1016/j.ceramint.2022.04.23610.1016/j.ceramint.2022.04.236 ↗
13. V. Bushlya, F. Lenrick, J.-E. Ståhl, and R. M’Saoubi, Influence of Oxygen on the Tool Wear in Machining, CIRP Ann., 2018, 67(1), p 79–82. https://doi.org/10.1016/j.cirp.2018.03.01110.1016/j.cirp.2018.03.011 ↗
14. Y. Yu, N. Xu, S. Zhu, Z. Qiao, J. Zhang, J. Yang, and W. Liu, A Novel Cu-Doped High Entropy Alloy with Excellent Comprehensive Performances for Marine Application, J. Mater. Sci. Technol., 2021, 69, p 48–59. https://doi.org/10.1016/j.jmst.2020.08.01610.1016/j.jmst.2020.08.016 ↗
15. Y. Yu, F. He, Z. Qiao, Z. Wang, W. Liu, and J. Yang, Effects of Temperature and Microstructure on the Triblogical Properties of CoCrFeNiNbx Eutectic High Entropy Alloys, J. Alloys Compd., 2019, 775, p 1376–1385. https://doi.org/10.1016/j.jallcom.2018.10.13810.1016/j.jallcom.2018.10.138 ↗
16. Z. Gao, H. Geng, Z. Qiao, B. Sun, Z. Gao, and C. Zhang, In Situ TiBX/TiXNiY/TiC Reinforced Ni60 Composites by Laser Cladding and Its Effect on the Tribological Properties, Ceram. Int., 2023, 49(4), p 6409–6418. https://doi.org/10.1016/j.ceramint.2022.10.08710.1016/j.ceramint.2022.10.087 ↗
17. W. Deng, F. Deng, R. Liu, P. Zhang, X. Ma, and Z. Xu, Interfacial Bonding Mechanism of High-Pressure Sintered Al–Ti–cBN Composites, Diam. Relat. Mater., 2019, 91, p 29–33. https://doi.org/10.1016/j.diamond.2018.11.00310.1016/j.diamond.2018.11.003 ↗
18. J. Wu, H. Wang, C. Wang, Y. Tang, Z. Hou, S. Wan, B. Liu, D. Wu, B. Chen, Z. Tan, and X. Ouyang, High Pressure Synthesis of Tungsten Carbide-Cubic Boron Nitride (WC-cBN) Composites: Effect of Thermodynamic Condition and cBN Volume Fraction on their Microstructure and Properties, J. Eur. Ceram. Soc., 2022, 42(11), p 4503–4512. https://doi.org/10.1016/j.jeurceramsoc.2022.04.03710.1016/j.jeurceramsoc.2022.04.037 ↗
19. H. Xie, F. Deng, H. Wang, J. Liu, S. Han, and F. Feng, Study of the Proportioning Design Method and Mechanical Properties of a cBN–TiN Composite, Int. J. Refract. Met. Hard Mater., 2020, 89, p 105209. https://doi.org/10.1016/j.ijrmhm.2020.10520910.1016/j.ijrmhm.2020.105209 ↗
20. Z. Xinxuan, N. Yangjin, J. Zijian, L. Shutong, Yu. Lou Zhichao, Z.Q. Jinku, and W. Mingzhi, Synthesis of Nonstoichiometric High-Entropy Nb-Added Carbides, Ceram. Int., 2021, 49(5), p 7187–7195. https://doi.org/10.1016/j.ceramint.2021.12.03810.1016/j.ceramint.2021.12.038 ↗
21. F. Kong, M. Yi, G. Xiao, Z. Chen, J. Zhang, H. Chen, L. Wang, J. Wu, and C. Xu, Synthesis and Characterization of cBN–Al2O3–Al Cutting Tool Material by Dual Power Spark Plasma Sintering, Int. J. Refract. Met. Hard Mater., 2022, 103, p 105765. https://doi.org/10.1016/j.ijrmhm.2021.10576510.1016/j.ijrmhm.2021.105765 ↗
22. G. Li, F. Dai, Y. Zhang, Q. Liu, and X. Fan, Research Progress on Oxidation Properties of Al Series High Entropy Alloys at High Temperature, J. Yanshan Univ., 2021, 45(3), p 189–201. https://doi.org/10.3969/j.issn.1007-791X.2021.03.00110.3969/j.issn.1007-791X.2021.03.001 ↗
23. D. Chu, H. Ma, Z. Zhang, F. Peng, and X. Jia, Synthesis and Characterization of Cubic Boron Nitride (Al)-Al2O3 Composites Under High Pressure and High Temperature Conditions, Int. J. Refract. Met. Hard Mater., 2022, 106, p 105876. https://doi.org/10.1016/j.ijrmhm.2022.10587610.1016/j.ijrmhm.2022.105876 ↗
24. L. Sun, P. Li, M. Ma, K. Luo, B. Liu, B. Li, Y. Wu, P. Ying, Y. Zhang, Z. Li, J. He, and Z. Zhao, Hard and Tough Ultrafine-Grained B4C-cBN Composites Prepared by High-Pressure Sintering, J. Eur. Ceram. Soc., 2022, 42(5), p 2015–2020. https://doi.org/10.1016/j.jeurceramsoc.2021.12.03310.1016/j.jeurceramsoc.2021.12.033 ↗
25. Z. Qin, P. Dong, Y. Li, Z. Yuan, D. Wu, and Y. Luo, Effects of the Ratio of Binder and the Ratio of cBN Particle Size on the Microstruc Ture and Properties of PcBN Composites, Diam. Abras. Eng., 2024, 44(263), p 1–8. https://doi.org/10.13394/j.cnki.jgszz.2023.009010.13394/j.cnki.jgszz.2023.0090 ↗
26. S. Xu, M. Wang, L. Qiao et al., Enhancing the Sintering Ability of TiNx by Introduction of Nitrogen Vacancy Defects, Ceram. Int., 2015, 41(8), p 9514–9520. https://doi.org/10.1016/j.ceramint.2015.04.00910.1016/j.ceramint.2015.04.009 ↗
27. Xu. Shuai, W. Mingzhi, Q. Lina et al., Influence of Nitrogen Vacancy Defects Incorporation on Densification Behaviour of Spark Plasma Sintered Non-stoichiometric TiN1−x, Adv. Appl. Ceram., 2014, 114(5), p 256–260. https://doi.org/10.1179/1743676114Y.000000021610.1179/1743676114Y.0000000216 ↗
28. J. Su and F. Yang, Effect of Sintering Intering Content on Microstructure and Mechanical Property of PCBN Composites, China Ceram., 2022, 58(2), p 32–36. https://doi.org/10.16521/j.cnki.issn.1001-9642.2022.02.00510.16521/j.cnki.issn.1001-9642.2022.02.005 ↗
29. W. Zhiwei, Li. Yanguo, Z. Qin, Yu. Dai Lifeng, L.Y. Qianghua, L. Wenqi, and Y. Yuhang, Effect of Sintering Parameters on Microstructure and Properties of Nanopolycrystalline Diamond Bulks Synthesized from Onion-Like Carbon, Diam. Relat. Mater., 2021, 111, p 108233. https://doi.org/10.1016/j.diamond.2020.10823310.1016/j.diamond.2020.108233 ↗
30. C. Chen, P. Mo, F. Lin, J. Chen, D. Xie, L. Xiao, and X. Pan, Synthesis of PCBN Composite by cBN–TiN–Al and Performance Research, China Ceram., 2019 https://doi.org/10.16521/j.cnki.issn.1001-9642.2019.07.00610.16521/j.cnki.issn.1001-9642.2019.07.006 ↗
31. E. Marzieh, Z. Mohammad, and R. Mansour, The Effect of Temperature on the Physical and Mechanical Properties of Nanostructured Boron Nitride by Spark Plasma Sintering, J. Alloy. Compd., 2020, 835, p 155317. https://doi.org/10.1016/j.jallcom.2020.15531710.1016/j.jallcom.2020.155317 ↗
32. K. Li, P. Mo, J. Chen, X. Pan, J. Zhang, Y. Wu, and C. Chen, Phase Composition, Microstructure, and Mechanical Properties of PcBN Composites with Ti and Ti Al Binders: Effects of Holding Time and Synthesis Pressure, Int. J. Refract. Met. Hard Mater., 2024, 118, p 106434. https://doi.org/10.1016/j.ijrmhm.2023.10643410.1016/j.ijrmhm.2023.106434 ↗
33. P. Mo, J. Chen, C. Chen, Q. Hu, X. Pan, L. Xiao, and F. Lin, Study on the Composition, Microstructure and Mechanical Properties of PCBN Composites Synthesized by TiN–AlN–Ti Combined with cBN, J. Mater. Sci., 2022, 57(36), p 17481–17490. https://doi.org/10.1007/s10853-022-07726-310.1007/s10853-022-07726-3 ↗
34. J. Wu, Z. Zhang, H. Wang, C. Wang, Z. Hou, D. Wu, and X. Ouyang, High-Pressure Synthesis of Tungsten Carbide–Cubic Boron Nitride (WC–cBN) Composites: Effect of cBN Particle Size and Volume Fraction on their Microstructure and Properties, Int. J. Refract. Met. Hard Mater., 2023, 110, p 106037. https://doi.org/10.1016/j.ijrmhm.2022.10603710.1016/j.ijrmhm.2022.106037 ↗
35. Z. Jiang, Q. Jian, Y. Han, Y. Zhu, and Z. Li, Performance Evaluation of cBN–Ti3AlC2–Al Composites Fabricated by HTHP Method, Ceram. Int., 2020, 46(15), p 24449–24453. https://doi.org/10.1016/j.ceramint.2020.06.22810.1016/j.ceramint.2020.06.228 ↗
36. M.-A. Umer, P.-H. Sub, D.-J. Lee, H.-J. Ryu, and S.-H. Hong, Polycrystalline Cubic Boron Nitride Sintered Compacts Prepared from Nanocrystalline TiN Coated cBN Powder, Mater. Sci. Eng. A, 2012, 552, p 151–156. https://doi.org/10.1016/j.msea.2012.05.02410.1016/j.msea.2012.05.024 ↗
37. M. Li, L. Liang, H. Wang, P. Zhao, X. Zhao, G. Shao, and R. Zhang, Processing and Properties of PcBN Composites Fabricated by HPHT Using PSN and Al as Sintering Additive, Rare Met., 2020, 39(5), p 570–576. https://doi.org/10.1007/s12598-020-01371-y10.1007/s12598-020-01371-y ↗
38. L. Li, Y. Zhao, K. Sun, H. Ji, D. Feng, and Z. Li, Composition, Microstructure and Mechanical Properties of cBN-Based Composites Sintered with AlN-Al-Ni Binder, Ceram. Int., 2018, 44(14), p 16915–16922. https://doi.org/10.1016/j.ceramint.2018.06.13010.1016/j.ceramint.2018.06.130 ↗
39. M. Chen, Y. Zheng, X. Guo, H. Liang, X. Xu, M. Yang, Z. Jiang, and X. Zhu, Effect of VC Addition on the Microstructure and Properties of TiC Steel-Bonded Carbides Fabricated by Two-Step Sintering, Int. J. Refract. Met. Hard Mater., 2022, 108, p 105948. https://doi.org/10.1016/j.ijrmhm.2022.10594810.1016/j.ijrmhm.2022.105948 ↗
40. Z. Wang, Y. Liu, K. Liu, and B. Wang, Mechanical Properties and Microstructure of Spark Plasma Sintered WC-8 wt.%Co–VC–cBN Ultrafine Grained Cemented Carbide, Ceram. Int., 2019, 45(17), p 23658–23665. https://doi.org/10.1016/j.ceramint.2019.08.07810.1016/j.ceramint.2019.08.078 ↗
41. Z. Qin, P. Dong, Y. Li, D. Wu, and Y. Luo, Preparation and Characterization of PcBN Composites with High Entropy Ceramic Bonding, Diam. Relat. Mater., 2023, 131, p 109536. https://doi.org/10.1016/j.diamond.2022.10953610.1016/j.diamond.2022.109536 ↗
42. Y. Yungang, C. Xiaozhe, C. Rui, Li. Tianheng, Z. Jianbing, Yu. Wang Yanhui, Y.L. Jing, and Xu. Xipeng, Reactive Sintering cBN–Ti–Al Composites by Spark Plasma Sintering, Diam. Relat. Mater., 2016, 69, p 138–143. https://doi.org/10.1016/j.diamond.2016.08.00910.1016/j.diamond.2016.08.009 ↗
43. Mo. Peicheng, C. Chao, C. Jiarong, J. Guang, X. Delong, X. Leyin, P. Xiaoyi, and L. Feng, Effect of Sintering Temperature on Synthesis of PCBN in cBN–Ti–Al–W System, Diam. Relat. Mater., 2020, 103, p 107714. https://doi.org/10.1016/j.diamond.2020.10771410.1016/j.diamond.2020.107714 ↗
44. H. Ji, Z. Li, K. Sun, and Y. Zhu, Assessment of the Performance of TiB2 Nanoparticles Doped cBN–TiN–Al–Co Composites by High Temperature High Pressure Sintering, Mater. Chem. Phys., 2019, 233, p 46–51. https://doi.org/10.1016/j.matchemphys.2019.05.04210.1016/j.matchemphys.2019.05.042 ↗