Unusual Rolling Texture in Ferritic/Martensitic Steel
Source abstract
Abstract
This paper presents the results of studies on texture formation in ferritic/martensitic steel 12Cr-2W subjected to equal channel angular pressing, warm rolling, and additional heat treatment. X-ray diffraction analysis, transmission electron microscopy, and electron backscatter diffraction were used to study the structure. An unusual texture transition H {001} → L {0 $$\overline{1}$$ 1} was observed for the first time during additional heat treatment of rolled ferritic/martensitic steel. A possibility of such texture transition is due to activation of twinning processes and increase of a number of boundaries with the coincidence site lattice relationships (the CSL boundaries).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev and I.V. Alexandrov, Bulk Nanostructured Materials from Severe Plastic Deformation, Progress Mater. Sci., 2000, 45, p 103–189. https://doi.org/10.1016/S0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
2. R.Z. Valiev, A.P. Zhilyaev and T.G. Langdon, Bulk Nanostructured Materials: Fundamentals and Applications, Wiley, New Jersey, 2014, p 456. https://doi.org/10.1002/978111874267910.1002/9781118742679 ↗
3. V.D. Sitdikov, R.K. Islamgaliev, M.A. Nikitina and G.F. Sitdikova, Application of x-ray Technique to Study the Structure of Ultrafine-Grained Ferritic/Martensitic Steel, J. Mater. Eng. Perform., 2019, 28, p 7109–7118. https://doi.org/10.1007/s11665-019-04440-110.1007/s11665-019-04440-1 ↗
4. M. Holscher, D. Raabe and K. Lucke, Rolling and Recrystallization Textures of Body Centered Cubic Steels, Steel Res. Int., 1991, 62, p 567–575. https://doi.org/10.1002/srin.19910045110.1002/srin.199100451 ↗
5. D. Raabe and K. Lucke, Textures of Ferritic Stainless-Steels, Mater. Sci. Technol., 1993, 9, p 302–312. https://doi.org/10.1179/mst.1993.9.4.30210.1179/mst.1993.9.4.302 ↗
6. D. Raabe, Overview on Basic Types of Hot Rolling Textures of Steels, Steel Res. Int., 2003, 74, p 327–337. https://doi.org/10.1002/srin.20030019410.1002/srin.200300194 ↗
7. R.P. Siqueira, H.R.Z. Sandim, T.R. Oliveira and D. Raabe, Composition and Orientation Effects on the Final Recrystallization Texture of Coarse-Grained Nb-Containing AISI 430 Ferritic Stainless Steels, Mater. Sci. Eng. A, 2011, 528, p 3513–3519. https://doi.org/10.1016/j.msea.2011.01.00710.1016/j.msea.2011.01.007 ↗
8. M. Hölscher, D. Raabe and K. Lücke, Relationship Between Rolling Textures and Shear Textures in f.c.c. and b.c.c. Metals, Acta Metall. Mater., 1994, 42, p 879–886. https://doi.org/10.1016/0956-7151(94)90283-610.1016/0956-7151(94)90283-6 ↗
9. Z. Wang, Y. Guo, X. Liu, G. Wang and P. Zhang, Recrystallization Texture Characteristic and Drawability of a Warm Rolled and Cold Rolled Interstitial-Free Steel, J. Mater. Eng. Perform., 2006, 15, p 646–650. https://doi.org/10.1361/105994906X15079510.1361/105994906X150795 ↗
10. J. Scharnweber, P. Chekhonin, C.-G. Oertel, J. Romberg, J. Freudenberger, J. Jaschinski and W. Skrotzki, Microstructure, Texture, and Mechanical Properties of Laminar Metal Composites Produced by Accumulative Roll Bonding, Adv. Eng. Mater., 2019, 21, p 1800210. https://doi.org/10.1002/adem.20100006710.1002/adem.201000067 ↗
11. U.F. Kocks, C.N. Tome and H.R. Wenk, Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect, Cambridge University Press, Cambridge, 1998, p 676
12. F. Gao, F.-X. Yu, R.D.K. Misra, X.-J. Zhang, S.-M. Zhang and Z.-Y. Liu, Microstructure, Texture, and Deep Drawability Under Two Different Cold-Rolling Processes in Ferritic Stainless Steel, J. Mater. Eng. Perform., 2015, 24, p 3862–3880. https://doi.org/10.1007/s11665-015-1689-510.1007/s11665-015-1689-5 ↗
13. D. Raabe and M. Ylitalo, Experimental Investigation of the Transformation Texture in Hotrolledferritic Stainless Steel using Single Orientation Determination, Metall. Mater. Trans. A, 1996, 27, p 49–57.10.1007/BF02647746 ↗
14. R.B. Singh, D. Verma, N.K. Mukhopadhyay, G.V.S. Sastry and R. Manna, Development of Texture in Ultrafine-Grained Low-Carbon Steel Processed through Equal-Channel Angular Pressing, J. Mater. Eng. Perform., 2019, 28, p 3638–3651.10.1007/s11665-019-04085-0 ↗
15. R.K. Islamgaliev, M.A. Nikitina, A.V. Ganeev and V.D. Sitdikov, Strengthening Mechanisms in Ultrafine-Grained Martensitic Steel, Mater. Sci. Eng. A, 2019, 744, p 163–170. https://doi.org/10.1016/j.msea.2018.11.14110.1016/j.msea.2018.11.141 ↗
16. R.A. Lebensohn and C.N. Tome, A Self-consistent Viscoplastic Model: Prediction of Rolling Textures of Anisotropic Polycrystals, Mater. Sci. Eng. A, 1994, 175, p 71–82.10.1016/0921-5093(94)91047-2 ↗
17. N.P. Gurao, P. Kumar, A. Sarkar, H.-G. Brokmeier and S. Suwas, Simulation of Deformation Texture Evolution During Multi Axial Forging of Interstitial Free Steel, J. Mater. Eng. Perform., 2013, 22, p 1004–1009. https://doi.org/10.1007/s11665-012-0388-810.1007/s11665-012-0388-8 ↗
18. L.S. Toth, A. Molinari and D. Raabe, Modeling of Rolling Texture Development in a Ferritic Chromium Steel, Metall. Mater. Trans. A, 1997, 28, p 2343–2351.10.1007/s11661-997-0191-6 ↗
19. M. Imran and F. Walther, Metal Forming (Cold): Dislocation Mechanisms and Microstructural Changes, Reference Module Mater. Sci. Eng., 2015 https://doi.org/10.1016/B978-0-12-803581-8.02881-210.1016/B978-0-12-803581-8.02881-2 ↗
20. I. Gutierrez-Urrutia and D. Raabe, Study of Deformation Twinning and Planar Slip in a TWIP Steel by Electron Channeling Contrast Imaging in a SEM, Mater. Sci. Forum, 2012, 702–703, p 523–529.
21. J. Hidalgo and M.J. Santofimia, Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite, Metall. Mater. Trans. A, 2016, 47, p 5288–5301. https://doi.org/10.1007/s11661-016-3525-410.1007/s11661-016-3525-4 ↗
22. R.D.K. Misra, S. Nayak, P.K.C. Venkatasurya, V. Ramuni, M.C. Somani and L.P. Karjalainen, Nanograined/Ultrafine-Grained Structure and Tensile Deformation Behavior of Shear Phase Reversion-Induced 301 Austenitic Stainless Steel, Metall. Mater. Trans. A., 2010, 41, p 2162–2174.10.1007/s11661-010-0230-6 ↗
23. F. Forouzan, A. Najafizadeh, A. Kermanpur, A. Hedayati and R. Surkialiabad, Production of Nano/Submicron Grained AISI 304L Stainless Steel Through the Martensite Reversion Process, Mater. Sci. Eng. A., 2010, 527, p 7334–7339. https://doi.org/10.1016/j.msea.2010.08.00210.1016/j.msea.2010.08.002 ↗
24. I. Shakhova, V. Dudko, A. Belyakov, K. Tsuzaki and R. Kaibyshev, Effect of Large Strain Cold Rolling and Subsequent Annealing on Microstructure and Mechanical Properties of an Austenitic Stainless Steel, Mater. Sci. Eng. A., 2012, 545, p 176–186.10.1016/j.msea.2012.02.101 ↗
25. Y.F. Shen, L. Lu, Q.H. Lu, Z.H. Jin and K. Lu, Tensile Properties of Copper with Nano-Scale Twins, Scripta Mater., 2005, 52, p 989–994. https://doi.org/10.1016/j.scriptamat.2005.01.03310.1016/j.scriptamat.2005.01.033 ↗
26. Y.F. Shen, N. Jia, R.D.K. Misra and L. Zuo, Softening Behavior by Excessive Twinning and Adiabatic Heating at High Strain Rate in a Fe-20Mn-0.6C TWIP Steel, Acta Mater., 2016, 103, p 229–242. https://doi.org/10.1016/j.actamat.2015.09.06110.1016/j.actamat.2015.09.061 ↗
27. Y.F. Shen, Y.D. Wang, X.P. Liu, X. Sun, R. Lin Peng, S.Y. Zhang, L. Zuo and P.K. Liaw, Deformation Mechanisms of a 20 Mn TWIP Steel Investigated by In Situ Neutron Diffraction and TEM, Acta Mater., 2013, 61, p 6093–6106. https://doi.org/10.1016/j.actamat.2013.06.05110.1016/j.actamat.2013.06.051 ↗