Optimization of Hot Extrusion Process Parameters of Mg97Y2Zn1 Alloy Based on the Processing Maps
Source abstract
Abstract
The processing maps of the Mg97Y2Zn1 alloy have been developed for optimizing hot workability and controlling the microstructure in this paper. Compression tests were conducted in the temperature range from 250 to 450 °C and the strain rate range from 0.001 to 5.0 s−1. The processing maps were calculated based on the flow stress behavior and analyzed according to the dynamic materials model. The maps exhibited a stability domain that occurs in the temperature of 430-450 °C for a strain rate of 0.002-0.003 s−1 and having a maximum efficiency of 50%. A hot extrusion test was carried out to assess the prediction of the processing maps for Mg97Y2Zn1 alloy. The influence of the extrusion temperature on the microstructure and tensile properties of the extruded alloys was analyzed to identify the optimum processing parameters. The results have shown good agreement between the regimes exhibited by the map and the microstructure of the extruded alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. C. Antion, P. Donnadieu, F. Perrard, A. Deschamps, C. Tassin, and A. Pisch, Hardening Precipitation in a Mg-4Y-3RE Alloy, Acta Mater., 2003, 51, p 5335–534810.1016/S1359-6454(03)00391-4 ↗
2. Q. Li, Q. Wang, H. Zhou, X. Zeng, Y. Zhang, and W. Ding, High Strength Extruded Mg-5Zn-2Nd-1.5Y-0.6Zr-0.4Ca Alloy Produced by Electromagnetic Casting, Mater. Lett., 2005, 59, p 2549–255410.1016/j.matlet.2005.03.044 ↗
3. B. Chen, D.-L. Lin, X.-Q. Zeng, and C. Lu, Effects of Yttrium and Zinc Addition on the Microstructure and Mechanical Properties of Mg-Y-Zn Alloys, J. Mater. Sci., 2010, 45, p 2510–251710.1007/s10853-010-4223-z ↗
4. K. Yamada, Y. Okubo, M. Shiono, H. Watanabe, S. Kamado, and Y. Kojima, Alloy Development of High Toughness Mg-Gd-Y-Zn-Zr Alloys, Mater. Trans., 2006, 47, p 1066–107010.2320/matertrans.47.1066 ↗
5. A. Inoue, Y. Kawamura, M. Matsushita, K. Hayashi, and J. Koike, Novel Hexagonal Structure and Ultrahigh Strength of Magnesium Solid Solution in the Mg-Zn-Y System, J. Mater. Res., 2001, 16, p 1894–190010.1557/JMR.2001.0260 ↗
6. B. Chen, D.-L. Lin, X.-Q. Zeng, and C. Lu, Microstructure and Mechanical Properties of Ultrafine Grained Mg97Y2Zn1 Alloy Processed by Equal Channel Angular Pressing, J. Alloys Compd., 2007, 440, p 94–10010.1016/j.jallcom.2006.09.005 ↗
7. B. Chen, D.-L. Lin, X.-Q. Zeng, and C. Lu, Elevated Temperature Mechanical Behavior of Mg-Y-Zn Alloys, Mater. Sci. Forum, 2007, 546–549, p 237–24010.4028/www.scientific.net/MSF.546-549.237 ↗
8. M. Nishida, T. Yamamuro, M. Nagano, Y. Morizono, and Y. Kawamura, Electron Microscopy Study of Microstructure Modifications in RS P/M Mg97Zn1Y2 Alloy, Mater. Sci. Forum, 2003, 419–422, p 715–72010.4028/www.scientific.net/MSF.419-422.715 ↗
9. T. Itoi, T. Seimiya, Y. Kawamura, and M. Hirohashi, Long Period Stacking Structures Observed in Mg97Zn1Y2 Alloy, Scr. Mater., 2004, 51, p 107–11110.1016/j.scriptamat.2004.04.003 ↗
10. M. Yoshikawa, M. Kohzu, H. Watanabe, and K. Higashi, Quality Improvement of Rapidly Solidified Magnesium Alloy by Plastic Processing, Mater. Sci. Forum, 2003, 419–422, p 769–77610.4028/www.scientific.net/MSF.419-422.769 ↗
11. D. Lin, L. Wang, Y. Liu, J.-Z. Cui, and Q.-C. Le, Effects of Plastic Deformation on Precipitation Behavior and Tensile Fracture Behavior of Mg-Gd-Y-Zr Alloy, T. Nonferr. Metal. Soc., 2011, 21, p 2160–216710.1016/S1003-6326(11)60989-8 ↗
12. R. Wang, J. Dong, L.-K. Fan, P. Zhang, and W.-J. Ding, Microstructure and Mechanical Properties of Rolled Mg-12Gd-3Y-0.4Zr Alloy Sheets, T. Nonferr. Metal. Soc., 2008, 18, p s189–s19310.1016/S1003-6326(10)60200-2 ↗
13. B. Chen, C. Lu, D.-L. Lin, and X.-Q. Zeng, Flow Stress Behavior of Mg97Y2Zn1 Alloy during Hot Compression Deformation at Elevated Temperatures, J. Shanghai Jiao Tong Univ., 2010, 44, p 593–597 (in Chinese)
14. H.-Z. Li, H.-J. Wang, Z. Li, C.-M. Liu, and H.-T. Liu, Flow Behavior and Processing Map of As-Cast Mg-10Gd-4.8Y-2Zn-0.6Zr Alloy, Mater. Sci. Eng. A, 2010, 528, p 154–16010.1016/j.msea.2010.08.090 ↗
15. S. Anbuselvan and S. Ramanathan, Hot Deformation and Processing Maps of Extruded ZE41A Magnesium Alloy, Mater. Des., 2010, 31, p 2319–232310.1016/j.matdes.2009.12.008 ↗
16. N. Srinivasan, Y. Prasad, and P. Rama Rao, Hot Deformation Behaviour of Mg-3Al Alloy—A Study Using Processing Map, Mater. Sci. Eng. A, 2008, 476, p 146–15610.1016/j.msea.2007.04.103 ↗
17. M. Meng, Z.-M. Zhang, B.-H. Zhang, and J. Dou, Flow Behaviors and Processing Maps of As-Cast and As-Homogenized AZ91 Alloy, J. Alloys Compd., 2011, 513, p 112–117
18. O. Sivakesavam and Y. Prasad, Hot Deformation Behaviour of As-Cast Mg-2Zn-1Mn Alloy in Compression: A Study with Processing Map, Mater. Sci. Eng. A, 2003, 362, p 118–12410.1016/S0921-5093(03)00296-X ↗
19. C.-Y. Wang, X.-J. Wang, H. Chang, K. Wu, and M.-Y. Zheng, Processing Maps for Hot Working of ZK60 Magnesium Alloy, Mater. Sci. Eng. A, 2007, 464, p 52–5810.1016/j.msea.2007.03.003 ↗
20. H.-T. Zhou, Q.-B. Li, Z.-K. Zhao, Z.-C. Liu, S.-F. Wen, and Q.-D. Wang, Hot Workability Characteristics of Magnesium Alloy AZ80—A Study Using Processing Map, Mater. Sci. Eng. A, 2010, 527, p 2022–202610.1016/j.msea.2009.12.009 ↗
21. Y. Prasad and S. Sasidhara, Hot Working Guide: A Compendium of Processing Maps, ASM International, Materials Park, OH, 1997
22. Y.V.R.K. Prasad, H. Gegel, S. Doraivelu, J. Malas, J. Morgan, K. Lark, and D. Barker, Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242, Metall. Mater. Trans. A, 1984, 15, p 1883–189210.1007/BF02664902 ↗
23. Y. Prasad, Recent Advances in the Science of Mechanical Processing, Indian J. Technol., 1990, 28, p 435–451
24. R. Wilcox and P. Whitton, The Cold Extrusion of Metals Using Lubrication at Slow Speeds, J. Inst. Met., 1958–1959, 87, p 289–293
25. G.-E. Dieter, H.-A. Huhn, and S.-L. Semiatin, Handbook of Workability and Process Design, ASM International, Materials Park, OH, 2003