Production and Characterization of Highly Conductive Aluminum Metal for Electric Motor Applications
Source abstract
Abstract
The aim of this research is to produce and develop high-conductive and non-magnetic Al-based materials used in industrial rotors to reduce rotor conductor losses and increase motor efficiency. To achieve this, ETIAL 7 Al metal was melted together with AlB2 and AlB12 inoculant materials at individually added proportions (ranging from approximately 0.025-0.300%) using an induction melting furnace. The removal of boron from Al metal was achieved by the interaction of boron with impurity elements at high temperatures and the formation of borides. Low-density metal borides precipitated into slag and high-density metal borides precipitated at the bottom of the molten metal in the induction furnace. As a result, the metal was rendered non-magnetic and its conductivity increased by removing impurity elements in the Al metal. After the casting process, the metal underwent heat treatment to obtain certain textures in the structure, which further enhanced its conductivity at desired directions. The elemental analysis, phase structure, chemical state, microstructural, electrical, and magnetic properties of the produced Al materials were characterized by using OEM, XRD, XPS, SEM-EDS, IA, and VSM. This study has successfully produced extra-high-conductivity and non-magnetic materials with an innovative approach, without changing the system, and in a cost-efficient manner compared to the current situation. These materials can be used to increase the efficiency of electric motors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. D.F. Salotti, F.A.M. Sauer, I.L. Tatizawa et al., A Performance Evaluation of Three-Phase Induction Electric Motors between 1945 and 2020, Energies, 2022 https://doi.org/10.3390/EN1506200210.3390/EN15062002 ↗
2. J.D. Widmer, R. Martin, and B.C. Mecrow, Precompressed and Stranded Aluminum Motor Windings for Traction Motors, IEEE Trans. Ind. Appl., 2016, 52, p 2215–2223. https://doi.org/10.1109/TIA.2016.252822610.1109/TIA.2016.2528226 ↗
3. D.T. Peters, E.F. Brush, and J.L. Kirtley, Die-Cast Copper Rotors as Strategy for Improving Induction Motor Efficiency.In: 2007 Electr Insul Conf Electr Manuf Expo, EEIC. 322-327 (2007). https://doi.org/10.1109/EEIC.2007.456263610.1109/EEIC.2007.4562636 ↗
4. B. Bilgin, and A. Emadi, Electric Motors in Electrified Transportation: A Step Toward Achieving a Sustainable and Highly Efficient Transportation System, IEEE Power Electron Mag., 2014, 1, p 10–17. https://doi.org/10.1109/MPEL.2014.231227510.1109/MPEL.2014.2312275 ↗
5. S. Karabay, and I. Uzman, Inoculation of Transition Elements by Addition of AlB2 and AlB12 to Decrease Detrimental Effect on the Conductivity of 99.6% Aluminium in CCL for Manufacturing of Conductor, J. Mater. Process. Technol., 2005, 160, p 174–182. https://doi.org/10.1016/J.JMATPROTEC.2004.06.01510.1016/J.JMATPROTEC.2004.06.015 ↗
6. S. Karabay, Modification of AA-6201 Alloy for Manufacturing of High Conductivity and Extra High Conductivity Wires with Property of High Tensile Stress After Artificial Aging Heat Treatment for all-Aluminium Alloy Conductors, Mater. Des., 2006, 27, p 821–832. https://doi.org/10.1016/J.MATDES.2005.06.00510.1016/J.MATDES.2005.06.005 ↗
7. S. Karabay, Influence of AlB2 Compound on Elimination of Incoherent Precipitation in Artificial Aging of Wires Drawn from Redraw Rod Extruded from Billets Cast of Alloy AA-6101 by vertical Direct Chill Casting, Mater. Des., 2008, 29, p 1364–1375. https://doi.org/10.1016/J.MATDES.2007.06.00410.1016/J.MATDES.2007.06.004 ↗
8. L. Pengfei, W. Zhigang, W. Yunli et al., Effect of Cerium on Mechanical Performance and Electrical Conductivity of Aluminum Rod for Electrical Purpose, J. Rare Earths, 2006, 24, p 355–357. https://doi.org/10.1016/S1002-0721(07)60400-110.1016/S1002-0721(07)60400-1 ↗
9. R.Z. Valiev, M. Murashkin, and I. Sabirov, A Nanostructural Design to Produce High-Strength Al Alloys with Enhanced Electrical Conductivity, Scr. Mater., 2014, 76, p 13–16. https://doi.org/10.1016/J.SCRIPTAMAT.2013.12.00210.1016/J.SCRIPTAMAT.2013.12.002 ↗
10. M.Y. Murashkin, I. Sabirov, X. Sauvage, and R.Z. Valiev, Nanostructured Al and Cu Alloys with Superior Strength and Electrical Conductivity, J. Mater. Sci., 2016, 51, p 33–49. https://doi.org/10.1007/S10853-015-9354-9/FIGURES/1010.1007/S10853-015-9354-9/FIGURES/10 ↗
11. M. Corchado, F. Reyes, and O.M. Suárez, Effects of AlB2 Particles and Zinc on the Absorbed Impact Energy of Gravity Cast Aluminum Matrix Composites, JOM, 2014, 66, p 926–934. https://doi.org/10.1007/S11837-014-0911-5/TABLES/210.1007/S11837-014-0911-5/TABLES/2 ↗
12. I. Sabirov, M.Y. Murashkin, and R.Z. Valiev, Nanostructured Aluminium Alloys Produced by Severe Plastic Deformation: New Horizons in Development, Mater. Sci. Eng. A, 2013, 560, p 1–24. https://doi.org/10.1016/J.MSEA.2012.09.02010.1016/J.MSEA.2012.09.020 ↗
13. Y. Birol, Grain Refining Aluminium Foundry Alloys with Commercial Al-B Master Alloys, Mater. Sci. Technol., 2014, 30, p 277–282. https://doi.org/10.1179/1743284713Y.000000035010.1179/1743284713Y.0000000350 ↗
14. T. Wang, Z. Chen, H. Fu et al., Grain Refinement Mechanism of Pure Aluminum by Inoculation with Al-B Master Alloys, Mater. Sci. Eng. A, 2012, 549, p 136–143. https://doi.org/10.1016/J.MSEA.2012.04.01910.1016/J.MSEA.2012.04.019 ↗
15. Z. Chen, T. Wang, L. Gao et al., Grain Refinement and Tensile Properties Improvement of Aluminum Foundry Alloys by Inoculation with Al-B Master Alloy, Mater. Sci. Eng. A, 2012, 553, p 32–36. https://doi.org/10.1016/J.MSEA.2012.05.08810.1016/J.MSEA.2012.05.088 ↗
16. (2) (PDF) The Influence of Inoculation Type on Structure of Pure Aluminum. https://www.researchgate.net/publication/265796857_The_influence_of_inoculation_type_on_structure_of_pure_aluminum. Accessed 28 Sep 2023
17. F. Xiao, M.X. Wu, Y.X. Wang et al., Effect of Trace Boron on Grain Refinement of Commercially Pure Aluminum by Al-5Ti-1B, Trans. Nonferrous Met. Soc. China, 2022, 32, p 1061–1069. https://doi.org/10.1016/S1003-6326(22)65855-210.1016/S1003-6326(22)65855-2 ↗
18. J. Szajnar, and T. Wróbel, Inoculation of Pure Aluminum with an Electromagnetic Field, J. Manuf. Process., 2008, 10, p 74–81. https://doi.org/10.1016/J.JMAPRO.2009.03.00310.1016/J.JMAPRO.2009.03.003 ↗
19. H. Chen, J.C. Jie, Y. Fu et al., Grain Refinement of Pure Aluminum by Direct Current Pulsed Magnetic Field and Inoculation, Trans. Nonferrous Met. Soc. China, 2014, 24, p 1295–1300. https://doi.org/10.1016/S1003-6326(14)63191-510.1016/S1003-6326(14)63191-5 ↗
20. S. Karabay, and I. Uzman, A Study on the Possible Usage of Continuously Cast Aluminium 99.6% Containing High Ti, V, and Cr Impurities AS Feedstock for the Manufacturing of Electrical ConductoRS, Mater. Manuf. Process., 2005, 20, p 231–243. https://doi.org/10.1081/AMP-20004188410.1081/AMP-200041884 ↗
21. X. Cui, Y. Wu, X. Liu et al., Effects of Grain Refinement and Boron Treatment on Electrical Conductivity and Mechanical Properties of AA1070 Aluminum, Mater. Des., 2015, 86, p 397–403. https://doi.org/10.1016/J.MATDES.2015.06.14910.1016/J.MATDES.2015.06.149 ↗
22. H. Wenk, Texture and Anisotropy—Twin, Reports Prog. Phys., 1998, 67, p 1367.10.1088/0034-4885/67/8/R02 ↗
23. I.L. Dillamore, and W.T. Roberts, Preferred Orientation in Wrought and Annealed Metals, Metall. Rev., 2013 https://doi.org/10.1179/mtlr196510127110.1179/mtlr1965101271 ↗
24. W.D. Callister, and D.G. Rethwisch, Materials Science and Engineering: an Introduction, Wiley, Hoboken, 2007.
25. M. Nowak, L. Bolzoni, and N. Hari Babu, Grain Refinement of Al-Si Alloys by Nb-B Inoculation. Part I: Concept Development and Effect on Binary Alloys, Mater. Des., 2015, 66, p 366–375. https://doi.org/10.1016/J.MATDES.2014.08.06610.1016/J.MATDES.2014.08.066 ↗
26. A. Yavaş, F. Güneş, M. Erol et al., Development of Visible Light Active Self-Cleaning Clay Roofing Tiles as Novel Building Materials: An Investigation on the Effects of α-Fe2O3 Coating and Firing Temperature, J. Clean. Prod., 2022, 362, 132302. https://doi.org/10.1016/J.JCLEPRO.2022.13230210.1016/J.JCLEPRO.2022.132302 ↗
27. Y. Zhang, Y. Liu, Y. Han et al., The Role of Cooling Rate in the Microstructure of Al-Fe-Si Alloy with High Fe and Si Contents, J. Alloys Compd., 2009, 473, p 442–445. https://doi.org/10.1016/J.JALLCOM.2008.06.00410.1016/J.JALLCOM.2008.06.004 ↗
28. X. Cui, Y. Wu, G. Zhang et al., Study on the Improvement of Electrical Conductivity and Mechanical Properties of Low Alloying Electrical Aluminum Alloys, Compos. Part B Eng., 2017, 110, p 381–387. https://doi.org/10.1016/J.COMPOSITESB.2016.11.04210.1016/J.COMPOSITESB.2016.11.042 ↗
29. Y. Ueda, E. Hashimoto, H. Tamura, and T. Kino, Anisotropy of Electrical Resistivity in High-Purity Aluminium Single Crystals, Le. J. Phys. IV, 1995, 05, p C7-287. https://doi.org/10.1051/JP4:199573410.1051/JP4:1995734 ↗