Preparation of Silicalite-1 Molecular Sieve Composite Anticorrosive Film on Stainless Steel Surfaces and Its Anticorrosion Performance and Mechanism
Source abstract
Abstract
This paper reports on a method of synthesizing silicalite-1 molecular sieve-based anti-corrosive film on stainless steel surface. The corrosion resistance and mechanisms of four preparation methods were studied. The results show that the silicalite-1 anti-corrosive film prepared by silane hot pressing shows the best surface, crystallinity, and anti-corrosion performance. On this basis, the film formation and anti-corrosive mechanisms of silicalite-1 anti-corrosion film on stainless steel surfaces were analyzed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Anodic Oxide Films and Nanostructures · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. A. Melissa, G. Javad, B. Florent et al., Improving the Formability of Stainless Steel 321 through Multistep Deformation for Hydroforming Applications, Trans. Can. Soc. Mech. Eng., 2013, 37(1), p 39–5210.1139/tcsme-2013-0003 ↗
2. L.Y. Yu, H. Luo, and L. Liu, AFM and Electro-Chemical Analysis of Pitting Corrosion of 2205 Duplex Stainless Steel in HCL Solution, Corros. Prot., 2010, 31(9), p 682–684
3. S. Pahlavan, S. Moazzen, I. Taji et al., Pitting Corrosion of Martensitic Stainless Steel in Halide Bearing Solutions, Corros. Sci., 2016, 112, p 233–24010.1016/j.corsci.2016.07.008 ↗
4. A. Pachón-Montao, J. Sánchez-Montero, C. Andrade et al., Threshold Concentration of Chlorides in Concrete for Stainless Steel Reinforcement: Classic Austenitic and New Duplex Stainless Steel, Constr. Build. Mater., 2018, 186, p 495–50210.1016/j.conbuildmat.2018.07.081 ↗
5. P. Marta, K.I. Helena, L.G. Rafael et al., Influence of Different Counterions on Gemini Surfactants with Polyamine Platform as Corrosion Inhibitors for Stainless Steel AISI, 304 in 3 M HCl, J. Mol. Liq., 2018, 268, p 824–83110.1016/j.molliq.2018.07.120 ↗
6. O. Kaczerewska, R. Leiva-Garcia, R. Akid et al., Efficiency of Cationic Gemini Surfactants with 3-Azamethylpentamethylene Spacer as Corrosion Inhibitors for Stainless Steel in Hydrochloric Acid, J. Mol. Liq., 2017, 247, p 6–1310.1016/j.molliq.2017.09.103 ↗
7. K. Aramaki and T. Shimura, An Ultrathin Polymer Coating of Carboxylate Self-assembled Monolayer Adsorbed on Passivated Iron to Prevent Iron Corrosion in 0.1 M Na2SO4, Corros. Sci., 2010, 52(1), p 1–610.1016/j.corsci.2009.06.055 ↗
8. Z.M. Chen, P. Lu, and H.Y. Xing, New Technology for Self-assembled Film Formation on Aluminum Surface, Mater. Corros., 2011, 44(1), p 58–66
9. C.B. Santos, E. Tentardini, L.A. Piana et al., Corrosion Resistance of PAPVD TiN Coating on AISI, 304 Stainless Steel, Trans. IMF, 2002, 80(5), p 147–14910.1080/00202967.2002.11871455 ↗
10. A. Paszternák, I. Felhősi, Z. Pászti et al., Surface Analytical Characterization of Passive Iron Surface Modified by Alkyl-Phosphonic Acid Layers, Electrochim. Acta, 2010, 55(3), p 804–81210.1016/j.electacta.2009.09.023 ↗
11. X. Liu, C. Yang, G.W. Xie et al., Study on the Corrosion-Resistant Performance of ZSM-5 Zeolite Film on the Surface of Al2024, Adv. Mater. Res., 2014, 1033–1034, p 1254–125710.4028/www.scientific.net/AMR.1033-1034.1254 ↗
12. H.B. Pande and P.A. Parikh, Novel Application of ZSM-5 Zeolite: Corrosion-Resistant Coating in Chemical Process Industry, J. Mater. Eng. Perform., 2013, 22(1), p 190–19910.1007/s11665-012-0226-z ↗
13. Y. Dong, Y. Peng, G. Wang et al., Corrosion-Resistant Zeolite Silicalite-1 Coatings Synthesized by Seeded Growth, Ind. Eng. Chem. Res., 2012, 51(9), p 3646–365210.1021/ie202080a ↗
14. R. Cai, Cheminform Abstract: Ionothermal Synthesis of Oriented Zeolite Ael Films and Their Application as Corrosion-Resistant Coatings, Angew. Chem., 2010, 47(3), p 42010.1002/anie.200790264 ↗
15. X. Cheng, Z. Wang, and Y. Yan, Corrosion-Resistant Zeolite Coatings by In Situ Crystallization, Electrochem. Solid ST., 2001, 4(5), p B2310.1149/1.1359396 ↗
16. S. Mintova, J. Hedlund, V. Valtchev et al., Continuous Films of Zeolite ZSM-5 on Modified Gold Surface, Chem. Commun., 2007, 1, p 15
17. W. Yuan, Y.S. Lin, and W. Yang, Molecular Sieving MFI-Type Zeolite Membranes for Pervaporation Separation of Xylene Isomers, J. Am. Chem. Soc., 2004, 126(15), p 4776–477710.1021/ja031653t ↗
18. P.Z. Culfaz, A. Culfaz, and H. KaliPciLar, Preparation of MFI, Type Zeolite Membranes in a Flow System with Circulation of the Synthesis Solution, Microporous Mesoporous Mater., 2006, 92(1–3), p 134–14410.1016/j.micromeso.2006.01.004 ↗
19. W.F. Lai, H.W. Deckman, J.A. McHenry et al., Supported Zeolite Membranes with Controlled Crystal Width and Preferred Orientation Grown on a Growth Enhancing Layer. US Patent 5871650, 1994
20. Z. Lai, M. Tsapatsis, and J. Nicolich, Siliceous ZSM-5 Membranes by Secondary Growth of b-Oriented Seed Layers, Adv. Funct. Mater., 2004, 14(7), p 716–72910.1002/adfm.200400040 ↗
21. W. Xu, J. Dong, J. Li et al., A Novel Method for the Preparation of Zeolite ZSM-5, J. Chem. Soc. Chem. Commun., 1990, 10, p 755–75610.1039/c39900000755 ↗
22. M. Menendez, Preparation of MFI, Type Tubular Membranes by Steam-Assisted Crystallization, Microporous Mesoporous Mater., 2001, 50(2), p 195–200
23. L.H. Wee, L. Tosheva, C. Vasilev et al., Influence of the Dispersion Medium on the Properties of Spin-Coated Silicalite-1 Films, Microporous Mesoporous Mater., 2007, 103(1–3), p 296–30110.1016/j.micromeso.2007.02.016 ↗
24. D. Song, X. Jing, J. Wang et al., Corrosion-Resistant ZSM-5 Zeolite Coatings Formed on Mg-Li Alloy by Hot-Pressing, Corros. Sci., 2011, 53(5), p 1732–173710.1016/j.corsci.2011.01.047 ↗
25. D. Song, X. Jing, J. Wang et al., The Assembly of ZSM-5 Layer on Mg-Li Alloy by Hot-Pressing Using Silane Coupling Agent as Bond and Its Corrosion Resistance, J. Alloys Compd., 2012, 510(1), p 66–7010.1016/j.jallcom.2011.08.071 ↗
26. S. Yu, A. Ito, R. Tu, and T. Goto, Dome-Like and Dense SiC-SiO2 Nanocomposite Films Synthesized by Laser Chemical Vapor Deposition Using CO2 Laser, Surf. Coat. Technol., 2011, 205, p 2818–282210.1016/j.surfcoat.2010.10.050 ↗
27. L.-Y. Cui, S.-D. Gao, and P.-P. Li, Corrosion Resistance of a Self-healing Micro-arc Oxidation/Polymethyltrimethoxysilane Composite Coating on Magnesium Alloy AZ31, Corros. Sci., 2017, 118, p 84–9510.1016/j.corsci.2017.01.025 ↗
28. P. Roy, R. Kisslinger, S. Farsinezhad et al., All-Solution Processed, Scalable Superhydrophobic Coatings on Stainless Steel Surfaces Based on Functionalized Discrete Titania Nanotubes, Chem. Eng. J., 2018, 351, p 482–48910.1016/j.cej.2018.06.105 ↗
29. J.Y. Seo and M. Han, Multi-functional Hybrid Coatings Containing Silica Nanoparticles and Anti-corrosive Acrylate Monomer for Scratch and Corrosion Resistance, Nanotechnology, 2011, 22(2), p 02560110.1088/0957-4484/22/2/025601 ↗
30. L. Calabrese, L. Bonaccorsi, A. Caprì et al., Adhesion Aspects of Hydrophobic Silane Zeolite Coatings for Corrosion Protection of Aluminium Substrate, Prog. Org. Coat., 2014, 77(9), p 1341–135010.1016/j.porgcoat.2014.04.025 ↗
31. S.R. Wasserman, Y.T. Tao, and G.M. Whitesides, Structure and Reactivity of Alkylsiloxane Monolayers Formed by Reaction of Alkyltrichlorosilanes on Silicon Substrates, Langmuir, 1989, 5(4), p 1074–108710.1021/la00088a035 ↗
32. Z. Szklarska-Mialowska and E. Lunarska, The Effect of Sulfide Inclusions on the Susceptibility of Steels to Pitting, Stress Corrosion Cracking and Hydrogen Embrittlement, Mater. Corros., 1981, 32(11), p 478–48510.1002/maco.19810321103 ↗
33. G.S. Eklund, ChemInform Abstract: On the Initiation of Crevice Corrosion on Stainless Steel, ChemInform, 1976, 7(20), p 170