A New Approach for Consolidation of Pure Magnesium Powder Using an Integrated Severe Plastic Deformation Route
Source abstract
Abstract
In this paper, a new approach using a novel severe plastic deformation route is presented for consolidation and processing of a high-density and ultrafine-grained pure magnesium. Pure magnesium particles were successfully consolidated at 400 °C into a sufficiently dense bulk material using a new combined method including cyclic extrusion compression, equal channel angular pressing (ECAP) and conventional extrusion. The grain refinement, consolidation behavior and mechanical properties were deeply investigated. Results showed that the as-consolidated material had a fine grain structure with excellent tensile strength and ductility compared to as-cast and as-ECAPed specimens. Vickers microhardness increased from 38.75 to 52.58 during the process. Porosity also reduced considerably from 12.55 to 1.2% during the process which led to a dense bulk material. Results indicate that the introduced method is a promising and effective process for producing strong bulk materials from metal powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. A.A. Luo, Magnesium: Current and Potential Automotive Applications, JOM, 2002, 54(2), p 42-4810.1007/BF02701073 ↗
2. B.L. Mordike and T. Ebert, Magnesium: Properties—Applications—Potential, Mater. Sci. Eng. A, 2001, 302(1), p 37-4510.1016/S0921-5093(00)01351-4 ↗
3. Z. Li et al., The Development of Binary Mg-Ca Alloys for Use as Biodegradable Materials Within Bone, Biomaterials, 2008, 29(10), p 1329-134410.1016/j.biomaterials.2007.12.021 ↗
4. M.P. Staiger et al., Magnesium and Its Alloys as Orthopedic Biomaterials: a Review, Biomaterials, 2006, 27(9), p 1728-173410.1016/j.biomaterials.2005.10.003 ↗
5. F. Witte et al., In Vivo Corrosion of Four Magnesium Alloys and the Associated Bone Response, Biomaterials, 2005, 26(17), p 3557-356310.1016/j.biomaterials.2004.09.049 ↗
6. F. Witte et al., Biodegradable Magnesium Scaffolds: Part II: Peri-Implant Bone Remodeling, J. Biomed. Mater. Res. Part A, 2007, 81(3), p 757-76510.1002/jbm.a.31293 ↗
7. S. Amani, G. Faraji, and K. Abrinia, Microstructure and Hardness Inhomogeneity of Fine-Grained AM60 Magnesium Alloy Subjected to Cyclic Expansion Extrusion (CEE), J. Manuf. Process., 2017, 28, p 197-20810.1016/j.jmapro.2017.06.007 ↗
8. S. Amani et al., A Combined Method for Producing High Strength and Ductility Magnesium Microtubes for Biodegradable Vascular Stents Application, J. Alloys Compd., 2017, 723, p 467-47610.1016/j.jallcom.2017.06.201 ↗
9. O. Senkov et al., Compaction of Amorphous Aluminum Alloy Powder by Direct Extrusion and Equal Channel Angular Extrusion, Mater. Sci. Eng. A, 2005, 393(1), p 12-2110.1016/j.msea.2004.09.061 ↗
10. R.Z. Valiev and T.G. Langdon, Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement, Prog. Mater Sci., 2006, 51(7), p 881-98110.1016/j.pmatsci.2006.02.003 ↗
11. W. Botta Filho et al., Consolidation of Partially Amorphous Aluminium-Alloy Powders by Severe Plastic Deformation, Mater. Sci. Eng. A, 2004, 375, p 936-94110.1016/j.msea.2003.10.072 ↗
12. M. Haouaoui et al., Microstructure Evolution and Mechanical Behavior of Bulk Copper Obtained by Consolidation of Micro- and Nanopowders Using Equal-Channel angular Extrusion, Metall. Mater. Trans. A, 2004, 35(9), p 2935-294910.1007/s11661-004-0241-2 ↗
13. I. Karaman et al., The Effect of Temperature and Extrusion Speed on the Consolidation of Zirconium-Based Metallic Glass Powder Using Equal-Channel Angular Extrusion, Metall. Mater. Trans. A, 2004, 35(1), p 247-25610.1007/s11661-004-0125-5 ↗
14. R. Lapovok, D. Tomus, and C. Bettles, Shear Deformation with Imposed Hydrostatic Pressure for Enhanced Compaction of Powder, Scripta Mater., 2008, 58(10), p 898-90110.1016/j.scriptamat.2008.01.010 ↗
15. K. Matsuki et al., Microstructural Characteristics and Superplastic-Like Behavior in Aluminum Powder Alloy Consolidated by Equal-Channel Angular Pressing, Acta Mater., 2000, 48(10), p 2625-263210.1016/S1359-6454(00)00061-6 ↗
16. J. Robertson et al., Consolidation of Amorphous Copper Based Powder by Equal Channel Angular Extrusion, J. Non-Cryst. Solids, 2003, 317(1), p 144-15110.1016/S0022-3093(02)01995-6 ↗
17. M.R. Rezaei, S.H. Razavi, and S.G. Shabestari, Development of a Novel Al-Cu-Ti Metallic Glass Reinforced Al Matrix Composite Consolidated Through Equal Channel Angular Pressing (ECAP), J. Alloy. Compd., 2016, 673, p 17-2710.1016/j.jallcom.2016.02.234 ↗
18. K. Edalati et al., Cold Consolidation of Ball-Milled Titanium Powders Using High-Pressure Torsion, Metal. Mater. Trans. A, 2010, 41(13), p 3308-331710.1007/s11661-010-0400-6 ↗
19. M. Eskandarzade et al., A New Designed Incremental High Pressure Torsion Process for Producing Long Nanostructured Rod Samples, J. Alloy. Compd., 2017, 695, p 1539-154610.1016/j.jallcom.2016.10.296 ↗
20. K. Xia and X. Wu, Back Pressure Equal Channel Angular Consolidation of Pure Al Particles, Scripta Mater., 2005, 53(11), p 1225-122910.1016/j.scriptamat.2005.08.012 ↗
21. Wu, X.L. and K. Xia. Synthesis of Bulk Materials by Equal Channel Angular Consolidation of Particles. in Materials Science Forum. 2006. Trans Tech Publ.10.4028/0-87849-985-7.233 ↗
22. K. Xia et al., Ultrafine Pure Aluminium Through Back Pressure Equal Channel Angular Consolidation (BP-ECAC) of Particles, J. Mater. Sci., 2007, 42(5), p 1551-156010.1007/s10853-006-0819-8 ↗
23. J. Xiang et al., Microstructure Characteristics of ECAP-Processed (TiB + La2O3)/Ti-6Al-4 V Composites, J. Alloy. Compd., 2017, 726, p 57-6610.1016/j.jallcom.2017.07.294 ↗
24. M. Paydar et al., Equal Channel Angular Pressing–Forward Extrusion (ECAP–FE) Consolidation of Al Particles, Mater. Des., 2009, 30(3), p 429-43210.1016/j.matdes.2008.06.012 ↗
25. B. Mani and M. Paydar, Application of Forward Extrusion-Equal Channel Angular Pressing (FE-ECAP) in Fabrication of Aluminum Metal Matrix Composites, J. Alloy. Compd., 2010, 492(1-2), p 116-12110.1016/j.jallcom.2009.11.098 ↗
26. L. Ping et al., Refinement and Consolidation of Pure Al Particles by Equal Channel Angular Pressing and Torsion, Trans. Nonferrous Metals Soc. China, 2014, 24(5), p 1289-129410.1016/S1003-6326(14)63190-3 ↗
27. G. Faraji and H. Kim, Review of Principles and Methods of Severe Plastic Deformation for Producing Ultrafine-Grained Tubes, Mater. Sci. Technol., 2017, 33(8), p 905-92310.1080/02670836.2016.1215064 ↗
28. M. Bocanegra-Bernal, Hot Isostatic Pressing (HIP) Technology and its Applications to Metals and Ceramics, J. Mater. Sci., 2004, 39(21), p 6399-642010.1023/B:JMSC.0000044878.11441.90 ↗
29. Y. Iwahashi et al., Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials, Scripta Mater., 1996, 35(2), p 143-14610.1016/1359-6462(96)00107-8 ↗
30. M. Richert, H.J. McQueen, and J. Richert, Microband Formation in Cyclic Extrusion Compression of Aluminum, Can. Metall. Q., 1998, 37(5), p 449-457
31. K.H. Grote and E.K. Antonsson, Springer Handbook of Mechanical Engineering, Springer, Berlin, 200910.1007/978-3-540-30738-9 ↗
32. H. Ashuri and A. Hassani, Characterization of Severely Deformed New Composites Fabricated by Powder Metallurgy Including a Stage of Mechanical Alloying, J. Alloy. Compd., 2014, 617, p 444-45410.1016/j.jallcom.2014.08.031 ↗
33. R. Lapovok, Damage Evolution Under Severe Plastic Deformation, Int. J. Fract., 2002, 115(2), p 159-17210.1023/A:1016399111787 ↗
34. W. Lei et al., Effect of Annealing on the Texture and Mechanical Properties of Pure Mg by ECAP at Room Temperature, Vacuum, 2017, 144, p 281-28510.1016/j.vacuum.2017.08.016 ↗
35. O. Sitdikov and R. Kaibyshev, Dynamic Recrystallization in Pure Magnesium, Mater. Trans., 2001, 42(9), p 1928-193710.2320/matertrans.42.1928 ↗
36. H. Zengin and Y. Turen, Effect of La Content and Extrusion Temperature on Microstructure, Texture and Mechanical Properties of Mg-Zn-Zr Magnesium Alloy, Mater. Chem. Phys., 2018, 214, p 421-43010.1016/j.matchemphys.2018.04.110 ↗
37. Biswas, S., et al. Study of Texture Evolution of Pure Magnesium During ECAE Using EBSD. in Materials Science Forum. 2008. Trans Tech Publ.10.4028/www.scientific.net/MSF.584-586.343 ↗
38. S. Biswas et al., Analysis of Texture Evolution in Pure Magnesium and the Magnesium Alloy AM30 During Rod and Tube Extrusion, Mater. Sci. Eng. A, 2011, 528(10-11), p 3722-372910.1016/j.msea.2011.01.021 ↗
39. G. Fan et al., Improved Mechanical Property and Internal Friction of Pure Mg Processed by ECAP, Mater. Sci. Eng. A, 2012, 556, p 588-59410.1016/j.msea.2012.07.031 ↗
40. J. Del Valle, M.T. Pérez-Prado, and O. Ruano, Texture Evolution During Large-Strain Hot Rolling of the Mg AZ61 Alloy, Mater. Sci. Eng. A, 2003, 355(1-2), p 68-7810.1016/S0921-5093(03)00043-1 ↗
41. S. Liang, Z. Liu, and E. Wang, Microstructure and Mechanical Properties of Mg-Al-Zn Alloy Deformed by Cold Extrusion, Mater. Lett., 2008, 62(17-18), p 3051-305410.1016/j.matlet.2008.01.114 ↗
42. Y.-C. Shao et al., Polycrystal Modeling of Hot Extrusion Texture of AZ80 Magnesium Alloy, Trans. Nonferrous Metals Soc. China, 2016, 26(4), p 1063-107210.1016/S1003-6326(16)64203-6 ↗
43. A. Yamashita, Z. Horita, and T.G. Langdon, Improving the Mechanical Properties of Magnesium and a Magnesium Alloy Through Severe Plastic Deformation, Mater. Sci. Eng. A, 2001, 300(1), p 142-14710.1016/S0921-5093(00)01660-9 ↗
44. W. Gan et al., Microstructure and Tensile Property of the ECAPed Pure Magnesium, J. Alloy. Compd., 2009, 470(1-2), p 256-26210.1016/j.jallcom.2008.02.030 ↗
45. S.-B. Yi et al., Deformation and Texture Evolution in AZ31 Magnesium Alloy During Uniaxial Loading, Acta Mater., 2006, 54(2), p 549-56210.1016/j.actamat.2005.09.024 ↗
46. B. Chen et al., Equal-Channel Angular Pressing of Magnesium Alloy AZ91 and Its Effects on Microstructure and Mechanical Properties, Mater. Sci. Eng. A, 2008, 483-484, p 113-11610.1016/j.msea.2006.10.199 ↗
47. L. Zhang et al., Effects of Cyclic Extrusion and Compression on the Microstructure and Mechanical Properties of AZ91D Magnesium Composites Reinforced by SiC Nanoparticles, Mater. Charact., 2017, 126, p 17-2710.1016/j.matchar.2017.01.008 ↗
48. P. Pérez, G. Garcés, and P. Adeva, Influence of Texture on the Mechanical Properties of Commercially pure Magnesium Prepared by Powder Metallurgy, J. Mater. Sci., 2007, 42(11), p 3969-397610.1007/s10853-006-1301-3 ↗
49. M. Pereda et al., Corrosion Inhibition of Powder Metallurgy Mg by Fluoride Treatments, Acta Biomater., 2010, 6(5), p 1772-178210.1016/j.actbio.2009.11.004 ↗
50. G. Faraji, M. Mashhadi, and H. Kim, Microstructure Inhomogeneity in Ultra-Fine Grained Bulk AZ91 Produced by Accumulative Back Extrusion (ABE), Mater. Sci. Eng. A, 2011, 528(13), p 4312-431710.1016/j.msea.2011.02.075 ↗
51. N.M. Chelliah et al., Stress-Rupture Measurements of Cast Magnesium Strengthened by In Situ Production of Ceramic Particles, J. Mag. Alloys, 2017, 5, p 225-23010.1016/j.jma.2017.04.002 ↗