Dynamic Analysis of Recalescence Process and Interface Growth of Eutectic Fe82B17Si1 Alloy
Source abstract
Abstract
By employing the glass fluxing technique in combination with cyclical superheating, the microstructural evolution of the undercooled Fe82B17Si1 alloy in the obtained undercooling range was studied. With increase in undercooling, a transition of cooling curves was detected from one recalescence to two recalescences, followed by one recalescence. The two types of cooling curves were fitted by the break equation and the Johnson–Mehl–Avrami–Kolmogorov model. Based on the cooling curves at different undercoolings, the recalescence rate was calculated by the multi-logistic growth model and the Boettinger–Coriel–Trivedi model. Both the recalescence features and the interface growth kinetics of the eutectic Fe82B17Si1 alloy were explored. The fitting results that were obtained using TEM (SAED), SEM and XRD were consistent with the changing rule of microstructures. Finally, the relationship between the microstructure and hardness was also investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. F. Liu and G.C. Yang, Rapid Solidification of Highly Undercooled Bulk Liquid Superalloy: Recent Developments, Future Directions, Int. Mater. Rev., 2006, 51, p 145–17010.1179/174328006X102484 ↗
2. Z. Chen, F. Liu, X. Yang, N. Liu, and C.J. Shen, The Effect of Non-equilibrium δ/γ Transition on the Formation of Metastable “Dendrite Core” in Undercooled Fe–Cu Alloy, J. Cryst. Growth, 2012, 354, p 174–18010.1016/j.jcrysgro.2012.05.011 ↗
3. H.F. Wang, F. Liu, Z. Chen, G.C. Yang, and Y.H. Zhou, Analysis of Non-equilibrium Dendrite Growth in a Bulk Undercooled Alloy Melt: Model and Application, Acta Mater., 2007, 55, p 497–50310.1016/j.actamat.2006.08.042 ↗
4. P.K. Galenko and D.A. Danilov, Hyperbolic Self-Consistent Problem of Heat Transfer in Rapid Solidification of Supercooled Liquid, Phys. Lett. A, 1997, 235, p 271–27810.1016/S0375-9601(97)00562-8 ↗
5. D.M. Herlach, Solidification from Undercooled Melts, Mater. Sci. Eng. R, 1994, 12, p 177–27210.1016/0927-796X(94)90011-6 ↗
6. A. Altgilbers, W. Hofmeister, and R. Bayuzick, The Dendrite Growth Kinetics of Nickel-Based Alloys, Mater. Sci. Eng. A, 2003, 360, p 26–3410.1016/S0921-5093(03)00066-2 ↗
7. Q. Chen, Z. Chen, F. Liu, R.X. Cui, and T. Liang, The Investigation of Recrystallization Developed in the Largely Undercooled Ni–3 at.% Sn Alloy, J. Alloys Compds., 2015, 638(25), p 109–11410.1016/j.jallcom.2015.03.064 ↗
8. A. Karma, Model of Grain Refinement in Solidification of Undercooled Melts, Int. J. Non Equilib. Process., 1998, 11, p 201–233
9. C.L. Yang, F. Liu, G. Yang, Y. Chen, N. Liu, and Y. Zhou, Microstructure and Phase Selection in Bulk Undercooled Fe–B Eutectic Alloys, J. Alloys Compds., 2007, 441, p 101–10610.1016/j.jallcom.2006.09.074 ↗
10. Z. Chen, Y. Yang, Q. Chen, J.F. Xu, Y. Tang, and F. Liu, Recalescence Effect Simulation and Microstructure Evolution of Undercooled Fe82B17Si1 Alloy, Acta Metall. Sinica, 2014, 50(7), p 795–801
11. Z.Z. Zhang, Z.Z. Song, G.C. Yang, and Y.H. Zhou, The Microstructure Characteristics of High Undercooled Bulk Nanocrystalline Fe-B-Si Eutectic Alloy, Acta Metall. Sin., 1999, 35(7), p 693–697
12. Z. Chen, Q. Chen, C.J. Shen, and F. Liu, Grain Growth and Thermal Stability Accompanying Recrystallization in Undercooled Ni-3at.%Sn Alloy, J. Alloys Compds., 2015, 646, p 983–98910.1016/j.jallcom.2015.06.083 ↗
13. J.F. Xu, F. Liu, K. Zhang, and M.M. Gong, Simple Approach for Description of Undercooled Solidification, Mater. Sci. Technol., 2012, 28, p 274–28110.1179/1743284711Y.0000000030 ↗
14. F. Liu, F. Sommer, C. Bos, and E.J. Mittemeijer, Analysis of Solid State Phase Transformation Kinetics: Models And Recipes, Int. Mater. Rev., 2007, 52, p 193–20510.1179/174328007X160308 ↗
15. J.F. Xu, F. Liu, X.L. Xu, and B. Dang, Undercooled Solidification of Ni–3·3 wt%B Alloy and Cooling Curve Description, Mater. Sci. Technol., 2012, 29, p 36–4210.1179/1743284712Y.0000000054 ↗
16. T. Suzuki, S. Toyoda, T. Umeda, and Y. Kimura, Dendrite Growth from the Supercooled Melt, J. Cryst. Growth, 1977, 38, p 123–12810.1016/0022-0248(77)90382-7 ↗
17. E. Schleip, R. Willnecker, D.M. Herlach, and G.P. Giirler, Measurements of Ultrarapid Solidification Rates in Greatly Undercooled Bulk Melts with a High Speed Photosensing Device, Mater. Sci. Eng., 1988, 98, p 39–4310.1016/0025-5416(88)90122-X ↗
18. R. Trivedi and W. Kurz, Modeling of Solidification Microstructures in Concentrated Solutions and Intermetallic Systems, Acta Metall., 1986, 26, p 1663–166910.1016/0001-6160(86)90112-4 ↗
19. W.J. Boettinger, S.R. Coriell, and R. Trivedi, Rapid Solidification Processing: Principles and Technologies IV, Claitor’s, Baton Rouge, 1988, p 13–24
20. E.C. Brandes, Smithells Metals Reference Book, 6th ed., Butterworth, London, 1983
21. M.N. Croker, R.S. Fidler, and R.W. Smith, The Characterization of Eutectic Structures, Proc. R. Soc. Lond., 1973, 335A, p 15–3710.1098/rspa.1973.0111 ↗
22. V. Raghavan, In phase Diagrams of Ternary Iron Alloys Part 6A. Designed and Produced by Electronic Publishing Center, Green Park Extension, New Delhi, 1993, 11, p 406
23. N.J. Petch, The Cleavage Strength of Polycrystals, J. Iron Steel Inst. Lond., 1953, 173, p 25–28