Synergistic Effects of Temperature, Oxidation and Stress Level on Fatigue Damage Evolution and Lifetime Prediction of Cross-Ply SiC/CAS Ceramic-Matrix Composites Through Hysteresis-Based Parameters
Source abstract
Abstract
The damage development and cyclic fatigue lifetime of cross-ply SiC/CAS ceramic-matrix composites have been investigated at different testing temperatures in air atmosphere. The relationships between the fatigue hysteresis-based damage parameters, i.e., fatigue hysteresis dissipated energy, fatigue hysteresis modulus and fatigue peak strain and the damage mechanisms of matrix multicracking, fiber/matrix interface debonding, interface sliding and fibers failure, have been established. With the increase in the cycle number, the evolution of the fatigue hysteresis modulus, fatigue peak strain and fatigue hysteresis dissipated energy depends upon the fatigue peak stress levels, interface and fibers oxidation and testing temperature. The fatigue life S-N curves of cross-ply SiC/CAS composite at room and elevated temperatures have been predicted, and the fatigue limit stresses at room temperature, 750 and 850 °C, are 50, 36 and 30% of the tensile strength, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. R. Naslain, Design, Preparation and Properties of Non-oxide CMCs for Application in Engines and Nuclear Reactors: An Overview, Compos. Sci. Technol., 2004, 64, p 155–17010.1016/S0266-3538(03)00230-6 ↗
2. L.B. Li, Modeling Strength Degradation of Fiber-Reinforced Ceramic-Matrix Composites Under Cyclic Loading at Room and Elevated Temperatures, Mater. Sci. Eng. A, 2017, 695, p 221–22910.1016/j.msea.2017.04.035 ↗
3. J.C. McNulty and F.W. Zok, Low-Cycle Fatigue of Nicalon-Fiber-Reinforced Ceramic Composites, Compos. Sci. Technol., 1999, 59, p 1597–160710.1016/S0266-3538(99)00019-6 ↗
4. H. Mei, L.F. Cheng, L.T. Zhang, and Y.D. Xu, Modeling the Effects of Thermal and Mechanical Load Cycling on a C/SiC Composite in Oxygen/Argon Mixture, Carbon, 2007, 45, p 2195–220410.1016/j.carbon.2007.06.051 ↗
5. L.B. Li, Damage Development in Fiber-Reinforced Ceramic-Matrix Composites Under Cyclic Fatigue Loading Using Hysteresis Loops at Room and Elevated Temperatures, Int. J. Fract., 2016, 199, p 39–5810.1007/s10704-016-0085-y ↗
6. A. Yasmin and P. Bowen, Fatigue Behavior of Cross-Ply Nicalon/CAS-II, Glass-Ceramic Matrix Composite at Room and Elevated Temperatures, Compos. A, 2004, 35, p 83–9410.1016/j.compositesa.2003.08.009 ↗
7. L.B. Li, Modeling of Fatigue Hysteresis Behavior in Carbon Fiber-Reinforced Ceramic-Matrix Composites Under Multiple Loading Stress Levels, J. Compos. Mater., 2017, 51, p 971–98310.1177/0021998316657863 ↗
8. H. Mei and L.F. Cheng, Comparison of the Mechanical Hysteresis Of Carbon/Ceramic-Matrix Composites with Different Fiber Preforms, Carbon, 2009, 47, p 1034–104210.1016/j.carbon.2008.12.025 ↗
9. J. Kim and P.K. Liaw, Fracture Behavior of ceramic Matrix Composites During Monotonic and Cyclic Loading, Key Eng. Mater., 2007, 345–346, p 649–65210.4028/www.scientific.net/KEM.345-346.649 ↗
10. L.B. Li, Relationship Between Hysteresis Dissipated Energy and Temperature Rising in Fiber-Reinforced Ceramic-Matrix Composites Under Cyclic Loading, Appl. Compos. Mater., 2016, 23, p 337–35510.1007/s10443-015-9463-2 ↗
11. M.B. Ruggles-Wrenn and M.D. Lee, Fatigue Behavior of an Advanced SiC/SiC Ceramic Composite with a self-healing Matrix at 1300 °C in Air and in Steam, Mater. Sci. Eng. A, 2016, 677, p 438–44510.1016/j.msea.2016.09.076 ↗
12. H. Mei and L.F. Cheng, Stress-Dependence and Time-Dependence of the Post-Fatigue Tensile Behavior of Carbon Fiber Reinforced SiC Matrix Composites, Compos. Sci. Technol., 2011, 71, p 1401–1409
13. P. Reynaud, Cyclic Fatigue of Ceramic-Matrix Composites at Ambient and Elevated Temperatures, Compos. Sci. Technol., 1996, 56, p 809–81410.1016/0266-3538(96)00025-5 ↗
14. A. Dalmaz, P. Reynaud, D. Rouby, G. Fantozzi, and F. Abbe, Mechanical Behavior and Damage Development During Cyclic Fatigue at High-Temperature of a 2.5D Carbon/SiC Composite, Compos. Sci. Technol., 1998, 58, p 693–69910.1016/S0266-3538(97)00150-4 ↗
15. G. Fantozzi and P. Reynaud, Mechanical Hysteresis in Ceramic Matrix Composites, Mater. Sci. Eng. Part A Struct., 2009, 521–522, p 18–2310.1016/j.msea.2008.09.128 ↗
16. L.B. Li, Assessment of the Interfacial Properties from Fatigue Hysteresis Loss Energy in Ceramic-Matrix Composites with Different Fiber Preforms at Room and Elevated Temperatures, Mater. Sci. Eng. A, 2014, 613, p 17–3610.1016/j.msea.2014.06.092 ↗
17. R.J. Tuznik, Fatigue Behavior of a Cross-Ply Ceramic Matrix Composite at Elevated Temperatures Under Tension–Tension Loading. Master thesis, Air Force Institute of Technology, 1993.
18. F. Lamouroux, G. Camus, and J. Thebault, Kinetics and Mechanisms of Oxidation of 2D Woven C/SiC Composites: I, Experimental Approach, J. Am. Ceram. Soc., 1994, 77, p 2049–205710.1111/j.1151-2916.1994.tb07096.x ↗
19. M.C. Halbig, J.D. McGuffin-Cawley, A.J. Eckel, and D.N. Brewer, Oxidation Kinetics and Stress Effects for the Oxidation of Continuous Carbon Fibers Within a Microcracked C/SiC Ceramic Matrix Composite, J. Am. Ceram. Soc., 2008, 91, p 519–52610.1111/j.1551-2916.2007.02170.x ↗
20. E. Lara-Curzio, Analysis of Oxidation-Assisted Stress-Rupture of Continuous Fiber-Reinforced Ceramic Matrix Composites at Intermediate Temperatures, Compos. Part A, 1999, 30, p 549–55410.1016/S1359-835X(98)00148-1 ↗
21. L. Casas and J.M. Martinez-Esnaola, Modelling the Effect of Oxidation on the Creep Behavior of Fiber-Reinforced Ceramic Matrix Composites, Acta Mater., 2003, 51, p 3745–375710.1016/S1359-6454(03)00189-7 ↗
22. W.A. Curtin, B.K. Ahn, and N. Takeda, Modeling Brittle and Tough Stress–Strain Behavior in Unidirectional Ceramic Matrix Composites, Acta Mater., 1998, 46, p 3409–342010.1016/S1359-6454(98)00041-X ↗
23. A.G. Evans, Design and Life Prediction Issues for High-Temperature Engineering Ceramics and Their Composites, Acta Mater., 1997, 45, p 23–4010.1016/S1359-6454(96)00143-7 ↗
24. L.B. Li, Synergistic Effects of Stress-Rupture and Cyclic Loading on Strain Response of Fiber-Reinforced Ceramic-Matrix Composites at Elevated Temperature in Oxidizing Atmosphere, Materials, 2017, 10, p 18210.3390/ma10020182 ↗
25. L.B. Li, Fatigue Life Prediction of 2D Woven Ceramic-Matrix Composites at Room and Elevated Temperatures, J. Eng. Mater. Sci., 2017, 26, p 1209–1222
26. Z.H. Xia and W.A. Curtin, Toughness-to-Brittle Transitions in Ceramic-Matrix Composites with Increasing Interfacial Shear Stress, Acta Mater., 2000, 48, p 4879–489210.1016/S1359-6454(00)00291-3 ↗