Flow Stress and Processing Map of a PM 8009Al/SiC Particle Reinforced Composite During Hot Compression
Source abstract
Abstract
Hot compression tests of 8009Al alloy reinforced with 15% SiC particles (8009Al/15%SiCp composites) prepared by powder metallurgy (direct hot extrusion methods) were performed on Gleeble-3500 system in the temperature range of 400-550 °C and strain rate range of 0.001-1 s−1. The processing map based on the dynamic material model was established to evaluate the flow instability regime and optimize processing parameters; the associated microstructural changes were studied by the observations of optical metallographic and scanning electron microscopy. The results showed that the flow stress increased initially and reached a plateau after peak stress value with increasing strain. The peak stress increased as the strain rate increased and deformation temperature decreased. The optimum parameters were identified to be deformation temperature range of 500-550 °C and strain rate range of 0.001-0.02 s−1 by combining the processing map with microstructural observation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A. Hassani, E. Bagherpour, and F. Qods, Influence of Pores on Workability of Porous Al/SiC Composites Fabricated Through Powder Metallurgy + Mechanical Alloying, J. Alloys Compd., 2014, 591, p 132–14210.1016/j.jallcom.2013.12.205 ↗
2. M. Hossein-Zadeh, O. Mirzaee, and P. Saidi, Structural and Mechanical Characterization of Al-Based Composite Reinforced with Heat Treated Al2O3 Particles, Mater. Des., 2014, 54, p 245–25010.1016/j.matdes.2013.08.036 ↗
3. I.A. Ibrahim, F.A. Mohamed, and E.J. Lavernia, Particulate Reinforced Metal Matrix Composites—A Review, J. Mater. Sci., 1991, 26(5), p 1137–115610.1007/BF00544448 ↗
4. R. Naslain, Design, Preparation and Properties of Non-oxide CMCs for Application in Engines and Nuclear Reactors: An Overview, Compos. Sci. Technol., 2004, 64(2), p 155–17010.1016/S0266-3538(03)00230-6 ↗
5. T.S. Srivatsan, T.S. Sudarshan, and E.J. Lavernia, Processing of Discontinuously-Reinforced Metal Matrix Composites by Rapid Solidification, Prog. Mater. Sci., 1995, 39(4–5), p 317–40910.1016/0079-6425(95)00003-8 ↗
6. C. Xue, H. Bai, P.F. Tao, J.W. Wang, N. Jiang, and S.L. Wang, Thermal Conductivity and Mechanical Properties of Flake Graphite/Al Composite with a SiC Nano-Layer on Graphite Surface, Mater. Des., 2016, 108, p 250–25810.1016/j.matdes.2016.06.122 ↗
7. L. Zhang, H. Xu, Z. Wang, Q. Li, and J. Wu, Mechanical Properties and Corrosion Behavior of Al/SiC Composites, J. Alloys Compd., 2016, 678, p 23–3010.1016/j.jallcom.2016.03.180 ↗
8. H.D. Wu, H. Zhang, S. Chen, and D.F. Fu, Flow Stress Behavior and Processing Map of Extruded 7075Al/SiC Particle Reinforced Composite Prepared by Spray Deposition During Hot Compression, Trans. Nonferrous Met. Soc., 2015, 25(3), p 692–69810.1016/S1003-6326(15)63654-8 ↗
9. X. Li, C. Liu, K. Luo, M. Ma, and R. Liu, Hot Deformation Behaviour of SiC/AA6061 Composites Prepared by Spark Plasma Sintering, J. Mater. Sci. Technol., 2016, 32(4), p 291–29710.1016/j.jmst.2015.12.006 ↗
10. B.V.R. Bhat, Y.R. Mahajan, and Y.V.R.K. Prasad, Effect of Volume Fraction of SiCp Reinforcement on the Processing Maps for 2124 Al Matrix Composites, Metall. Mater. Trans. A, 2000, 31(3), p 629–63910.1007/s11661-000-0006-5 ↗
11. B.V.R. Bhat, H.M. Roshan, and Y.V.R.K. Prasad, Processing Map for Hot Working of Powder Metallurgy 2124 Al-20 Vol Pct SiCp Metal Matrix Composite, Metall. Trans. A, 1992, 23A, p 123–130
12. M. Rajamuthamilselvan, S. Ramanathan, and R. Karthikeyan, Processing Map for Hot Working of SiCp/7075 Al Composites, Trans. Nonferrous Met. Soc., 2010, 20(4), p 668–67410.1016/S1003-6326(09)60196-5 ↗
13. G. Ganesan, K. Raghukandan, R. Karthikeyan, and B.C. Pai, Development of Processing Maps for 6061 Al/15% SiCp Composite Material, Mater. Sci. Eng. A, 2004, 369(1–2), p 230–23510.1016/j.msea.2003.11.019 ↗
14. S.M. Hao, J.P. Xie, A.Q. Wang, W.Y. Wang, J.W. Li, and H.L. Sun, Hot Deformation Behaviors of 35%SiCp/2024Al Metal Matrix Composites, Trans. Nonferrous Met. Soc., 2014, 24(8), p 2468–247410.1016/S1003-6326(14)63372-0 ↗
15. J.C. Shao, B.L. Xiao, Q.Z. Wang, Z.Y. Ma, Y. Liu, and K. Yang, Constitutive Flow Behavior and Hot Workability of Powder Metallurgy Processed 20vol.%SiCp/2024Al composite, Mater. Sci. Eng. A, 2010, 527(29–30), p 7865–787210.1016/j.msea.2010.08.080 ↗
16. S.M. Hao, J.P. Xie, A.Q. Wang, W.Y. Wang, and J.W. Li, Hot Deformation Behavior and Processing Map of SiCp/2024Al Composite, Rare Metal Mater. Eng., 2014, 43(12), p 2912–291610.1016/S1875-5372(15)60032-7 ↗
17. G.Q. Tong and K.C. Chan, Deformation Behavior of a PM Al6013/15SiCp Composite Sheet at Elevated Temperature, Mater. Lett., 1999, 38(5), p 326–33010.1016/S0167-577X(98)00183-9 ↗
18. A. Patel, S. Das, and B.K. Prasad, Compressive Deformation Behaviour of Al Alloy (2014)-10wt.% SiCp Composite: Effects of Strain Rates and Temperatures, Mater. Sci. Eng. A, 2011, 530, p 225–23210.1016/j.msea.2011.09.078 ↗
19. H.J. McQueen, M.E. Kassner, S. Spigarelli, and E. Evangelista, Hot Deformation and Processing of Aluminum Alloys, CRC Press, Boca Raton, 2011
20. R.E. Franck and J.A. Hawk, Effect of Very High Temperatures on the Mechanical Properties of Al-Fe-V-Si Alloy, Scripta Metall. Mater., 1989, 23(1), p 113–11810.1016/0036-9748(89)90103-8 ↗
21. S. Lee, D.Y. Lee, and N.J. Kim, Correlation of Microstructure and Fracture Toughness of a Rapid Solidification-Powder Metallurgy Al-Fe-V-Si Alloy, Mater. Sci. Eng. A, 1991, 147(1), p 33–4410.1016/0921-5093(91)90802-T ↗
22. A.K. Srivastava, S.N. Ojha, and S. Ranganathan, Microstructural Features and Heat Flow Analysis of Atomized and Spray-Formed Al-Fe-V-Si Alloy, Metall. Mater. Trans. A, 1998, 29(8), p 2205–221910.1007/s11661-998-0045-x ↗
23. S. Spigarelli, Interpretation of Creep Behaviour of Dispersion-Strengthened Al-Fe-V-Si Alloys in Terms of Detachment Mechanisms: An Overview, Mater. Sci. Eng. A, 2002, 337(1–2), p 306–31410.1016/S0921-5093(02)00045-X ↗
24. Z.H. Chen, Y.Q. He, H.G. Yan, Z.G. Chen, X.J. Yin, and G. Chen, Ambient Temperature Mechanical Properties of Al-8.5Fe-1.3V-1.7Si/SiCp compsite, Mater. Sci. Eng. A, 2007, 460–461, p 180–18510.1016/j.msea.2007.02.105 ↗
25. J. Čadek, K. Kuchařová, and S.J. Zhu, Creep Behaviour of an Al-8.5Fe-1.3V-1.7Si-15SiCp Composite at Temperatures Ranging from 873 to 948 K, Mater. Sci. Eng. A, 2002, 328(1–2), p 283–29010.1016/S0921-5093(01)01705-1 ↗
26. J. Čadek, K. Kuchařová, and S.J. Zhu, High Temperature Creep Behaviour of an Al-8.5Fe-1.3V-1.7Si Alloy Reinfoced with Silion Carbide Particulates, Mater. Sci. Eng. A, 2000, 283(1–2), p 172–18010.1016/S0921-5093(00)00706-1 ↗
27. Y.D. Xiao, W. Wang, and W.X. Li, High Temperature Deformation Behavior and Mechanism of Spray Deposited Al-Fe-V-Si Alloy, Trans. Nonferrous Met. Soc., 2007, 17(6), p 1175–118010.1016/S1003-6326(07)60245-3 ↗
28. Q. Yan, D. Fu, X. Deng, H. Zhang, and Z. Chen, Tensile Deformation Behavior of Spray-Deposited FVS0812 Heat-Resistant Aluminum Alloy Sheet at Elevated Temperatures, Mater. Charact., 2007, 58(6), p 575–57910.1016/j.matchar.2006.06.024 ↗
29. D. Shimansky and H.J. McQueen, Hot Working of Heat Resistant Rapidly Solidified Al-Fe-V-Si Alloy, High Temp. Mater. Proc., 2011, 18(4), p 241–25210.1515/HTMP.1999.18.4.241 ↗
30. S. Hariprasad, S.M.L. Sastry, and K.L. Jerina, Deformation Behavior of a Rapidly Solidified Fine Grained Al-8.5%Fe-1.2%V-1.7%Si Alloy, Acta Mater., 1996, 44(1), p 383–38910.1016/1359-6454(95)00160-1 ↗
31. S. Ramanathan, R. Karthikeyan, and M. Gupta, Development of Processing Maps for Al/SiCp Composite Using Fuzzy Logic, J. Mater. Process. Technol., 2007, 183(1), p 104–11010.1016/j.jmatprotec.2006.09.033 ↗
32. H. Zhang, G.Y. Lin, D.S. Peng, L.B. Yang, and Q.Q. Lin, Dynamic and Static Softening Behaviors of Aluminum Alloys During Multistage Hot Deformation, J. Mater. Process. Technol., 2004, 148(2), p 245–24910.1016/j.jmatprotec.2003.12.020 ↗
33. J.W. Song, P.P. Jin, J.H. Wang, and Y.P. Zhu, Thermal Deformation Behavior of SiCp/Al Composite Material with Low SiC Volume Fraction, Mater. Rev., 2015, 29(1), p 163–166
34. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker, Modeling of Dynamic Material Behavior in Hot Deformation: Forging of Ti-6242, Metall. Trans. A, 1984, 15(10), p 1883–189210.1007/BF02664902 ↗
35. H.L. Gegel, J.C. Malas, and S.M. Doraivelu, Process modeling of p/m extrusion, Innovations in Materials Processing, G. Bruggeman and V. Weiss, Ed., Plenum Press, New York, 1985, p 137–15910.1007/978-1-4613-2411-9_8 ↗
36. Y.V.R.K. Prasad and T. Seshacharyulu, Processing Maps for Hot Working of Titanium Alloys, Mater. Sci. Eng. A, 1998, 243(1–2), p 82–8810.1016/S0921-5093(97)00782-X ↗
37. H. Ziegler, Progress in Solid Mechanics, I.N. Sneddon and R. Hill, Ed., Wiley, New York, 1965, p 91–193
38. P. Zhang, C. Hu, C.G. Ding, Q. Zhu, and H.Y. Qin, Plastic Deformation Behavior and Processing Maps of a Ni-Based Superalloy, Mater. Des., 2015, 65, p 575–58410.1016/j.matdes.2014.09.062 ↗
39. Y.C. Lin, L.T. Li, Y.C. Xia, and Y.Q. Jiang, Hot Deformation and Processing Map of a Typical Al-Zn-Mg-Cu Alloy, J. Alloys Compd., 2013, 550, p 438–44510.1016/j.jallcom.2012.10.114 ↗
40. Y. Yang, Z. Zhang, and X. Zhang, Processing Map of Al2O3 Particulate Reinforced Al Alloy Matrix Composites, Mater. Sci. Eng. A, 2012, 558, p 112–11810.1016/j.msea.2012.07.092 ↗