journal article·2021-05

Microstructure Evolution during High-Temperature Deformation of Ti-5Al-5V-2Mo-1Cr-1Fe Alloy under Compression

V. Anil Kumar, Aditya Sarkar, R. K. Gupta, M. J. N. V. Prasad, S. V. S. N. Murty

Publisher page

Abstract

Hot isothermal compression testing of Ti-5Al-5V-2Mo-1Cr-1Fe alloy exhibiting lamellar (α/β) microstructure was performed using a deformation simulator. The flow curves of the alloy were obtained as a function of temperature around its beta transus (‘Tβ’, the allotropic transformation temperature from HCP to BCC phase) at different strain rates in the range of 10−2-10 s−1. The apparent activation energy ‘Q’ for the alloy under these hot working conditions was found to be ~ 644 and ~ 317 kJ mol−1 in two-phase (α + β) and single-phase β regimes, respectively. Distinct constitutive relationships for the alloy have been established at various temperature regimes. Dynamic material model was employed to generate the processing maps and thereby evaluate the stable domains for hot working of this alloy. Deformation below the ‘Tβ’ led to α lamellae kinking followed by fragmentation and dynamic recrystallization of α phase. While deformation above ‘Tβ’ resulted in serrated β boundary, an indicative of dynamic recovery (DRV) of β phase. The processing maps along with the detailed post-deformed microstructural examination showed that the optimum/safe working domains for processing of the alloy are ‘T’ = 1123-1163 K and ‘ $$\dot{\varepsilon }$$ ’ = 10−2-10 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. G. Lutjering and J.C. Williams, Titanium—Engineering Materials and Processes, 2nd ed. Springer, Berlin, 2007, p 19–250.
2. V.N. Moiseyev, Titanium Alloys: Russian Aircraft and Aerospace Applications, Taylor and Francis Group, Boca Raton, 2005.10.1201/9781420037678 ↗
3. S.L. Semiatin, V. Seetharaman and I. Weiss, The Thermomechanical Processing of Alpha/Beta Titanium Alloys, JOM, 1997, 49, p 33–68.10.1007/BF02914711 ↗
4. D. Banerjee, A. Pilchak and J.C. Williams, Processing, Structure, Texture and Microtexture in Titanium Alloys, Mater. Sci. Forum., 2012, 710, p 66–84.10.4028/www.scientific.net/MSF.710.66 ↗
5. S. Tamirisakandala, B.V. Vedam and R.B. Bhat, Recent Advances in the Deformation Processing of Titanium Alloys, J. Mater. Eng. Perform., 2003, 12(6), p 661–673.10.1361/105994903322692466 ↗
6. S.L. Semiatin, An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, 51(6), p 2593–2625.10.1007/s11661-020-05625-3 ↗
7. Z.X. Zhang, S.J. Qu, A.H. Feng, J. Shen and D.L. Chen, Hot Deformation Behavior of Ti-6Al-4V Alloy: Effect of Initial Microstructure, J. Alloys Compd., 2017, 718, p 170–181.10.1016/j.jallcom.2017.05.097 ↗
8. E.B. Shell and S.L. Semiatin, Effect of Initial Microstructure on Plastic Flow and Dynamic Globularization During Hot Working of Ti-6AI-4V, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 1999, 30(12), p 3219–3229.10.1007/s11661-999-0232-4 ↗
9. T. Seshacharyulu, S.C. Medeiros, J.T. Morgan, J.C. Malas, W.G. Frazier and Y.V.R.K. Prasad, Hot Deformation and Microstructural Damage Mechanisms in Extra-Low Interstitial (ELI) Grade Ti-6Al-4V, Mater. Sci. Eng. A, 2000, 279(1–2), p 289–299.10.1016/S0921-5093(99)00173-2 ↗
10. F.W. Syed, V. Anil Kumar, R.K. Gupta and A.K. Kanjarla, Role of Microstructure on the Tension/Compression Asymmetry in a Two-Phase Ti-5Al-3Mo-1.5V Titanium Alloy, J. Alloys Compd., 2019, 2019(795), p 151–162.10.1016/j.jallcom.2019.04.272 ↗
11. S. Roy, S. Karanth and S. Suwas, Microstructure and Texture Evolution during Sub-Transus Thermo-Mechanical Processing of Ti-6Al-4V-0.1B Alloy: Part II. Static Annealing in (α+β) Regime, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, 44(7), p 3322–3336.10.1007/s11661-013-1673-3 ↗
12. W. Chen, C. Li, X. Zhang, C. Chen, Y.C. Lin and K. Zhou, Deformation-Induced Variations in Microstructure Evolution and Mechanical Properties of Bi-Modal Ti-55511 Titanium Alloy, J. Alloys Compd., 2019, 783, p 709–717.10.1016/j.jallcom.2018.12.262 ↗
13. W. Jia, W. Zeng, J. Liu, Y. Zhou and Q. Wang, On the Influence of Processing Parameters on Microstructural Evolution of a Near-Alpha Titanium Alloy, Mater. Sci. Eng. A, 2011, 530(1), p 135–143.10.1016/j.msea.2011.09.064 ↗
14. T. Li, L.H. Chai, S.H. Shi, Z.L. Xiang, Y.S. Cui, G.D. Shi and Z.Y. Chen, Effect of Near-Isothermal Forging Temperature on the Microstructure and Mechanical Properties of near α High Temperature Titanium Alloy, Mater. Sci. Forum, 2017, 898, p 579–585.10.4028/www.scientific.net/MSF.898.579 ↗
15. H. Matsumoto, T. Nishihara, Y. Iwagaki, T. Shiraishi, Y. Ono and A. Chiba, Microstructural Evolution and Deformation Mode under High-Temperature-Tensile-Deformation of the Ti-6Al-4V Alloy with the Metastable α′ Martensite Starting Microstructure, Mater. Sci. Eng. A, 2016, 661, p 68–78.10.1016/j.msea.2016.02.089 ↗
16. C.H. Park, Y.G. Ko, J.W. Park and C.S. Lee, Enhanced Superplasticity Utilizing Dynamic Globularization of Ti-6Al-4V Alloy, Mater. Sci. Eng. A, 2008, 496(1–2), p 150–158.10.1016/j.msea.2008.05.001 ↗
17. W. Peng, W. Zeng, Q. Wang, Q. Zhao and H. Yu, Effect of Processing Parameters on Hot Deformation Behavior and Microstructural Evolution during Hot Compression of As-Cast Ti60 Titanium Alloy, Mater. Sci. Eng. A, 2014, 593, p 16–23.10.1016/j.msea.2013.07.086 ↗
18. W. Chen, Y. Lv, X. Zhang, C. Chen, Y.C. Lin and K. Zhou, A Comparing the Evolution and Deformation Mechanisms of Lamellar and Equiaxed Microstructures in near β-Ti Alloys During Hot Deformation, Mater. Sci. Eng. A, 2019, 758(5), p 71–78.10.1016/j.msea.2019.05.015 ↗
19. C. Li, X. Zhang, K. Zhou and C. Peng, Relationship Between Lamellar α Evolution and Flow Behavior during Isothermal Deformation of Ti–5Al–5Mo–5V–1Cr–1Fe near β Titanium Alloy, Mater. Sci. Eng. A, 2012, 558, p 668–674.10.1016/j.msea.2012.08.074 ↗
20. H. Matsumoto, D. Naito, K. Miyoshi, K. Yamanaka, A. Chiba and Y. Yamabe-Mitarai, Forging Property, Processing Map, and Mesoscale Microstructural Evolution Modeling of a Ti-17 Alloy with a Lamellar (α+β) Starting Microstructure, Sci. Technol. Adv. Mater., 2017, 18(1), p 893–904.10.1080/14686996.2017.1386530 ↗
21. X. an Nie, Z. Hu, H. qun Liu, D. qing Yi, T. ying Chen, B. feng Wang, Q. Gao and D. chun Wang, High Temperature Deformation and Creep Behavior of Ti-5Al-5Mo-5V-1Fe-1Cr Alloy, Mater. Sci. Eng. A, 2014, 613, p 306–316.10.1016/j.msea.2014.06.116 ↗
22. Y.Q. Jiang, Y.C. Lin, G.D. Pang, D.G. He and N. Kotkunde, Constitutive Model and Processing Maps for a Ti-55511 Alloy in β Region, Adv. Eng. Mater., 2020, 22, p 1900930.10.1002/adem.201900930 ↗
23. Y.C. Lin, G. Pang, Y. Jiang, X. Liu, X. Zhang, C. Chen and K. Zhou, Hot Compressive Deformation Behavior and Microstructure Evolution of a Ti-55511 Alloy with Basket-Weave Microstructures, Vacuum, 2019, 169, p 108878.10.1016/j.vacuum.2019.108878 ↗
24. E. Alabort, P. Kontis, D. Barba, K. Dragnevski and R.C. Reed, On the Mechanisms of Superplasticity in Ti-6Al-4V, Acta Mater., 2016, 105, p 449–463.10.1016/j.actamat.2015.12.003 ↗
25. V. Anil Kumar, R.K. Gupta, V.S.K. Chakravadhanula, A.G. Rao, M.J.N.V. Prasad and S.V.S.N. Murty, Effect of Test Temperature on Tensile Behavior of Ti-5Al-5V-2Mo-1Cr-1Fe (α+β) Titanium Alloy with Initial Microstructures in Hot Forged and Heat Treated Conditions, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2019, 50(6), p 2702–2719.10.1007/s11661-019-05207-y ↗
26. I. Balasundar, K.R. Ravi and T. Raghu, On the High Temperature Deformation Behaviour of Titanium Alloy BT3-1, Mater. Sci. Eng. A, 2017, 684, p 135–145.10.1016/j.msea.2016.12.043 ↗
27. V. Anil Kumar, R.K. Gupta, J. Paul Murugan, J. Srinath, S.K. Manwatkar and S.V.S.N. Murty, Effect of Cooling Medium on Solution Treatment Response of Titanium Alloy Ti-5Al-5V-2Mo, Mater. Sci. Forum, 2015, 830–831, p 123–126.10.4028/www.scientific.net/MSF.830-831.123 ↗
28. Y. Qu, M. Wang, L. Lei, X. Huang, L. Wang, J. Qin, W. Lu and D. Zhang, Behavior and Modeling of High Temperature Deformation of an α+β Titanium Alloy, Mater. Sci. Eng. A, 2012, 555, p 99–105.10.1016/j.msea.2012.06.039 ↗
29. S.V.S.N. Murty, B. Nageswara Rao and B.P. Kashyap, Instability Criteria for Hot Deformation of Materials, Int. Mater. Rev., 2000, 45(1), p 15–26.10.1179/095066000771048782 ↗
30. C.M. Sellars and W.J. McTegart, On the Mechanism of Hot Deformation, Acta Metall., 1966, 14(9), p 1136–1138.10.1016/0001-6160(66)90207-0 ↗
31. C.M. Sellars and W.J. McTegart, Hot Workability, Int. Metall. Rev., 1972, 17(1), p 1–24.10.1179/095066072790137765 ↗
32. Y.V.R.K. Prasad and T. Seshacharyulu, Modelling of Hot Deformation for Microstructural Control, Int. Mater. Rev., 1998, 43(6), p 243–258.10.1179/imr.1998.43.6.243 ↗
33. V. Anil Kumar, R.K. Gupta, S.V.S.N. Murty and A.D. Prasad, Hot Workability and Microstructure Control in Co20Cr15W10Ni Cobalt-Based Superalloy, J. Alloys Compd., 2016, 676, p 527–541.10.1016/j.jallcom.2016.03.186 ↗
34. L.X. Li, Y. Lou, L.B. Yang, D.S. Peng and K.P. Rao, Flow Stress Behavior and Deformation Characteristics of Ti-3Al-5V-5Mo Compressed at Elevated Temperatures, Mater. Des., 2002, 23, p 451–457.10.1016/S0261-3069(02)00025-0 ↗
35. A. Momeni and S.M. Abbasi, Effect of Hot Working on Flow Behavior of Ti-6Al-4V Alloy in Single Phase and Two Phase Regions, Mater. Des., 2010, 31(8), p 3599–3604.10.1016/j.matdes.2010.01.060 ↗
36. J. Porntadawit, V. Uthaisangsuk and P. Choungthong, Modeling of Flow Behavior of Ti-6Al-4V Alloy at Elevated Temperatures, Mater. Sci. Eng. A, 2014, 599, p 212–222.10.1016/j.msea.2014.01.064 ↗
37. Y.V.R.K. Prasad, K.P. Rao and S. Sasidhara, Hot Working Guide A Compendium of Processing Maps, ASM Int., 2015 https://doi.org/10.1016/B978-0-08-033454-7.50019-X10.1016/B978-0-08-033454-7.50019-X ↗
38. Y.V.R.K. Prasad and T. Seshacharyulu, Processing Maps for Hot Working of Titanium Alloys, Mater. Sci. Eng. A, 1998, 243, p 82–88.10.1016/S0921-5093(97)00782-X ↗
39. L. Chenwei, High Temperature Deformation of TC18 Titanium Alloy, Rare Met. Mater. Eng., 2017, 46(2), p 326–332.10.1016/S1875-5372(17)30089-9 ↗
40. Y.V.R.K. Prasad, T. Seshacharyulu, S.C. Medeiros and W.G. Frazier, Effect of Preform Microstructure on the Hot Working Mechanisms in ELI Grade Ti-6Al-4V: Transformed β v. Equiaxed (α+β), Mater. Sci. Technol., 2000, 16(5), p 511–516.10.1179/026708300101508171 ↗
41. R.Q. Bao, X. Huang and C.X. Cao, Deformation Behavior and Mechanisms of Ti-1023 Alloy, Trans. Nonferrous Met. Soc. China, 2006, 16(2), p 274–280.10.1016/S1003-6326(06)60046-0 ↗
42. S.V.S.N. Murty and B.N. Rao, On the Dynamic Material Model for the Hot Deformation of Materials, J. Mater. Sci. Lett., 1999, 18(21), p 1757–1758.10.1023/A:1006623126416 ↗
43. S.V.S.N. Murty and B. Nageswara-Rao, Ziegler’s Criterion on the Instability Regions in Processing Maps, J. Mater. Sci. Lett., 1998, 17(14), p 1203–1205.10.1023/A:1006541710533 ↗
44. S.I. Wright, M.M. Nowell, S.P. Lindeman, P.P. Camus, M. De Graef and M.A. Jackson, Introduction and Comparison of New EBSD Post-Processing Methodologies, Ultramicroscopy, 2015, 159(P1), p 81–94.10.1016/j.ultramic.2015.08.001 ↗
45. N. Nayan, N.P. Gurao, S.V.S.N. Murty, A.K. Jha, B. Pant and K.M. George, Microstructure and Micro-Texture Evolution during Large Strain Deformation of Inconel Alloy IN718, Mater. Charact., 2015, 110, p 236–241.10.1016/j.matchar.2015.10.027 ↗
46. Y. Zhu, W. Zeng, F. Feng, Y. Sun, Y. Han and Y. Zhou, Characterization of Hot Deformation Behavior of As-Cast TC21 Titanium Alloy Using Processing Map, Mater. Sci. Eng. A, 2011, 528(3), p 1757–1763.10.1016/j.msea.2010.11.015 ↗
47. T. Furuhara, B. Poorganji, H. Abe and T. Maki, Dynamic Recovery and Recrystallization in Titanium Alloys by Hot Deformation, JOM, 2007, 59(1), p 64–67.10.1007/s11837-007-0013-8 ↗
48. K. Wang, W. Zeng, Y. Zhao, Y. Lai and Y. Zhou, Dynamic Globularization Kinetics during Hot Working of Ti-17 Alloy with Initial Lamellar Microstructure, Mater. Sci. Eng. A, 2010, 527(10–11), p 2559–2566.10.1016/j.msea.2010.01.034 ↗
49. S.L. Semiatin, N.C. Levkulich, C.A. Heck, A.E. Mann, N. Bozzolo, A.L. Pilchak and J.S. Tiley, Transient Plastic Flow and Phase Dissolution During Hot Compression of α/β Titanium Alloys, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, 51(5), p 2291–2305.10.1007/s11661-020-05673-9 ↗
50. Y. Liu and T.N. Baker, Deformation Characteristics of IMI685 Titanium Alloy under β Isothermal Forging Solutions, Mater. Sci. Eng. A, 1995, 197(2), p 125–131.10.1016/0921-5093(95)09691-4 ↗
51. Y.Y. Zong, D.B. Shan, M. Xu and Y. Lv, Flow Softening and Microstructural Evolution of TC11 Titanium Alloy during Hot Deformation, J. Mater. Process. Technol., 2009, 209(4), p 1988–1994.10.1016/j.jmatprotec.2008.04.063 ↗
52. Y.C. Lin, X.Y. Wu, X.M. Chen, J. Chen, D.X. Wen, J.L. Zhang and L.T. Li, EBSD Study of a Hot Deformed Nickel-Based Superalloy, J. Alloys Compd., 2015, 640, p 101–113.10.1016/j.jallcom.2015.04.008 ↗
53. X.M. Chen, Y.C. Lin, D.X. Wen, J.L. Zhang and M. He, Dynamic Recrystallization Behavior of a Typical Nickel-Based Superalloy during Hot Deformation, Mater. Des., 2014, 57, p 568–577.10.1016/j.matdes.2013.12.072 ↗
54. F. Warchomicka, M. Stockinger and H.P. Degischer, Quantitative Analysis of the Microstructure of near-β Titanium Alloy during Compression Tests, J. Mater. Process. Technol., 2006, 177(1–3), p 473–477.10.1016/j.jmatprotec.2006.04.022 ↗
55. N.G. Jones, R.J. Dashwood, D. Dye and M. Jackson, Thermomechanical Processing of Ti–5Al–5Mo–5V–3Cr, Mater. Sci. Eng. A, 2008, 490(1–2), p 369–377.10.1016/j.msea.2008.01.055 ↗
56. Q. Chao, P.D. Hodgson and H. Beladi, Ultrafine Grain Formation in a Ti-6Al-4V Alloy by Thermomechanical Processing of a Martensitic Microstructure, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, 45(5), p 2659–2671.10.1007/s11661-014-2205-5 ↗
57. M.T. Cope and D.R. Evetts, Superplastic Deformation Characteristics of Two Microduplex Titanium Alloys, J. Mater. Sci., 1986, 21, p 4003–4008.10.1007/PL00020272 ↗
58. D. He, J.C. Zhu, Z.H. Lai, Y. Liu and X.W. Yang, An Experimental Study of Deformation Mechanism and Microstructure Evolution during Hot Deformation of Ti–6Al–2Zr–1Mo–1V Alloy, Mater. Des., 2013, 46, p 38–48.10.1016/j.matdes.2012.09.045 ↗
59. W. Jia, W. Zeng, Y. Zhou, J. Liu and Q. Wang, High-Temperature Deformation Behavior of Ti-60 Titanium Alloy, Mater. Sci. Eng. A, 2011, 528(12), p 4068–4074.10.1016/j.msea.2011.01.113 ↗
60. X. Li, S. Lu, K. Wang, M.W. Fu, Z. Li and C. Cao, Hot Deformation Mechanism and Process Optimization for Ti-Alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si during α+β Forging based on Murty Criterion, Rare Met Mater Eng, 2008, 37(4), p 577–583.10.1016/S1875-5372(09)60015-1 ↗
61. P. Wanjara, M. Jahazi, H. Monajati, S. Yue and J.P. Immarigeon, Hot Working Behavior of Near-α Alloy IMI834, Mater. Sci. Eng. A, 2005, 396(1–2), p 50–60.10.1016/j.msea.2004.12.005 ↗
62. X. Ma, W. Zeng, Y. Sun, K. Wang, Y. Lai and Y. Zhou, Modeling Constitutive Relationship of Ti17 Titanium Alloy with Lamellar Starting Microstructure, Mater. Sci. Eng. A, 2012, 538, p 182–189.10.1016/j.msea.2012.01.027 ↗
63. C. Li, X. Zhang, Z. Li and K.-C. Zhou, Hot Deformation of Ti-5Al-5Mo-5V-1Cr-1Fe Near β Titanium Alloys Containing Thin and Thick Lamellar α Phase, Mater. Sci. Eng. A, 2013, 573, p 75–83.10.1016/j.msea.2013.02.033 ↗
64. J.K. Fan, H.C. Kou, M.J. Lai, B. Tang, H. Chang and J.S. Li, Characterization of Hot Deformation Behavior of a New near Beta Titanium Alloy: Ti-7333, Mater. Des., 2013, 49, p 945–952.10.1016/j.matdes.2013.02.044 ↗
65. F. Warchomicka, C. Poletti and M. Stockinger, Study of the Hot Deformation Behaviour in Ti–5Al–5Mo–5V–3Cr–1Zr, Mater. Sci. Eng. A, 2011, 528(28), p 8277–8285.10.1016/j.msea.2011.07.068 ↗