Effects of Immersion Temperature on the Performance of a Marine Epoxy-Based Organic Coating for Ballast Tanks
Source abstract
Abstract
The degradation behavior of an actual marine epoxy-based organic coating for ballast tanks immersed in 3.5% NaCl solution at different temperatures was investigated by employing electrochemical impedance spectroscopy and adhesion measurements. Elevated immersion temperature (e.g., 35, 45 and 55 °C) could greatly deteriorate coating protective performance, including barrier properties, wet adhesion strength, water uptake and diffusion, and this effect could become more pronounced with prolonged immersion time. The water diffusion based on water sorption curves was consistent with wet adhesion strength in temperature-dependent performance evaluation of the coating. The water uptake values at the quasi-saturation stage showed the expected temperature dependence when immersion temperature exceeded 35 °C. Breakpoint frequency could also be used for qualitatively evaluating the temperature-dependent and time-varying coating degradation behavior efficiently.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Marine Biology and Environmental Chemistry · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. H. Hayashibara, E. Tada, and A. Nishikata, Evaluation of Epoxy Coating for Ballast Tanks Under Thermal Cycling by Electrochemical Impedance Spectroscopy, ISIJ Int., 2016, 56(11), p 2029–2036.10.2355/isijinternational.ISIJINT-2016-228 ↗
2. D. Nguyen Dang, B. Peraudeau, S. Cohendoz, S. Mallarino, X. Feaugas, and S. Touzain, Effect of Mechanical Stresses on Epoxy Coating Ageing Approached by Electrochemical Impedance Spectroscopy Measurements, Electrochim. Acta, 2014, 124, p 80–89.10.1016/j.electacta.2013.08.111 ↗
3. Z.X. Wang, J.H. Zhao, X.H. Jia, J.G. Fang, B. Zhang, and G.Q. Ding, Influence of Inactivation Treatment of Ship’s Ballast Water on Corrosion Resistance of Ship Steel Plate, J. Iron Steel Res. Int., 2013, 20(11), p 85–89.10.1016/S1006-706X(13)60201-0 ↗
4. L. Maglic, D. Zec, and V. Francic, Ballast Water Sediment Elemental Analysis, Mar. Pollut. Bull., 2016, 103(1–2), p 93–100.10.1016/j.marpolbul.2015.12.042 ↗
5. G. Rigby, G. Hallegraeff, and A. Taylor, Ballast Water Heating Offers a Superior Treatment Option, J. Mar. Eng. Technol., 2004, 7(3), p 217–230.
6. E. Lakshmi, M. Priya, and V.S. Achari, An Overview on the Treatment of Ballast Water in Ships, Ocean Coast Manag., 2021, 199, p 105296.10.1016/j.ocecoaman.2020.105296 ↗
7. Y. Zheng, R.D. Priestley, and G.B. Mckenna, Physical Aging of an Epoxy Subsequent to Relative Humidity Jumps Through the Glass Concentration, J. Polym. Sci. Pol. Phys., 2004, 42(11), p 2107–2121.10.1002/polb.20084 ↗
8. S. Touzain, Q. Le Thu, and G. Bonnet, Evaluation of Thick Organic Coatings Degradation in Seawater Using Cathodic Protection and Thermally Accelerated Tests, Prog. Org. Coat., 2005, 52(4), p 311–319.10.1016/j.porgcoat.2004.09.007 ↗
9. S. Marouani, L. Curtil, and P. Hamelin, Ageing of Carbon/Epoxy and Carbon/Vinylester Composites Used in the Reinforcement and/or the Repair of Civil Engineering Structures, Compos. Part B-Eng., 2012, 43(4), p 2020–2030.10.1016/j.compositesb.2012.01.001 ↗
10. M.G. Oliviera, A.P. Romano, C. Vandermiers, X. Mathieu, and M. Poelman, Influence of the Stress Generated During an Ageing Cycle on the Barrier Properties of Cataphoretic Coatings, Prog. Org. Coat., 2008, 63(3), p 323–329.10.1016/j.porgcoat.2008.01.018 ↗
11. L. Fedrizzi, A. Bergo, and M. Fanicchia, Evaluation of Accelerated Aging Procedures of Painted Galvanised Steels by EIS, Electrochim. Acta, 2006, 51(8–9), p 1864–1872.10.1016/j.electacta.2005.02.146 ↗
12. L. Fedrizzi, A. Bergo, F. Deflorian, and L. Valentinelli, Assessment of Protective Properties of Organic Coatings by Thermal Cycling, Prog. Org. Coat., 2003, 48(2–4), p 271–280.10.1016/S0300-9440(03)00109-7 ↗
13. A. Miszczyk and K. Darowicki, Effect of Environmental Temperature Variations on Protective Properties of Organic Coatings, Prog. Org. Coat., 2003, 46(1), p 49–54.10.1016/S0300-9440(02)00188-1 ↗
14. N. Fredj, S. Cohendoz, S. Mallarino, X. Feaugas, and S. Touzain, Evidencing Antagonist Effects of Water Uptake and Leaching Processes in Marine Organic Coatings by Gravimetry and EIS, Prog. Org. Coat., 2010, 67(3), p 287–295.10.1016/j.porgcoat.2009.11.001 ↗
15. Y. Elkebir, S. Mallarino, D. Trinh, and S. Touzain, Effect of Physical Ageing onto the Water Uptake in Epoxy Coatings, Electrochim. Acta, 2020, 337, p 135766.10.1016/j.electacta.2020.135766 ↗
16. W.L. Tian, L. Liu, F.D. Meng, Y. Liu, Y. Li, and F.H. Wang, The Failure Behaviour of an Epoxy Glass Flake Coating/Steel System under Marine Alternating Hydrostatic Pressure, Corros. Sci., 2014, 86, p 81–92.10.1016/j.corsci.2014.04.038 ↗
17. J.T. Zhang, J.M. Hu, J.Q. Zhang, and C.N. Cao, Studies of Impedance Models and Water Transport Behaviors of Polypropylene Coated Metals in NaCl Solution, Prog. Org. Coat., 2004, 49(4), p 293–301.10.1016/S0300-9440(03)00115-2 ↗
18. C.F. Zhu, R. Xie, J.H. Xue, and L.L. Song, Studies of the Impedance Models and Water Transport Behaviors of Cathodically Polarized Coating, Electrochim. Acta, 2011, 56(16), p 5828–5835.10.1016/j.electacta.2011.04.068 ↗
19. Q.X. Zhou and Y.C. Wang, Comparisons of Clear Coating Degradation in NaCl Solution and Pure Water, Prog. Org. Coat., 2013, 76(11), p 1674–1682.10.1016/j.porgcoat.2013.07.018 ↗
20. L.V.S. Philippe, S.B. Lyon, C. Sammon, and J. Yarwood, Validation of Electrochemical Impedance Measurements for Water Sorption into Epoxy Coatings Using Gravimetry and Infra-Red Spectroscopy, Corros. Sci., 2008, 50(3), p 887–896.10.1016/j.corsci.2007.09.008 ↗
21. X.L. Liu, Y.W. Shao, Y.J. Zhang, G.Z. Meng, T. Zhang, and F.H. Wang, Using High-Temperature Mechanochemistry Treatment to Modify Iron Oxide and Improve the Corrosion Performance of Epoxy Coating—II. Effect of Grinding Temperature, Corros. Sci., 2015, 90, p 463–471.10.1016/j.corsci.2014.04.016 ↗
22. Z.Y. Lu, G.J. Xian, and H. Li, Effects of Thermal Aging on the Water Uptake Behavior of Pultruded BFRP Plates, Polym. Degrad. Stab., 2014, 110, p 216–224.10.1016/j.polymdegradstab.2014.09.003 ↗
23. R.G. Duarte, A.S. Castela, and M.G.S. Ferreira, A New Model for Estimation of Water Uptake of an Organic Coating by EIS: The Tortuosity Pore Model, Prog. Org. Coat., 2009, 65(2), p 197–205.10.1016/j.porgcoat.2008.11.007 ↗
24. J.M. Sykes, A Variant of the Brasher-Kingsbury Equation, Corros. Sci., 2004, 46(3), p 515–517.10.1016/j.corsci.2003.10.001 ↗
25. C. Vosgien Lacombre, G. Bouvet, D. Trinh, S. Mallarino, and S. Touzain, Water Uptake in Free Films and Coatings Using the Brasher and Kingsbury Equation: A Possible Explanation of the Different Values Obtained by Electrochemical Impedance Spectroscopy and Gravimetry, Electrochim. Acta, 2017, 231, p 162–170.10.1016/j.electacta.2017.02.051 ↗
26. V.N. Nguyen, F.X. Perrin, and J.L. Vernet, Water Permeability of Organic/Inorganic Hybrid Coatings Prepared by Sol-Gel Method: A Comparison Between Gravimetric and Capacitance Measurements and Evaluation of Non-Fickian Sorption Models, Corros. Sci., 2005, 47(2), p 397–412.10.1016/j.corsci.2004.06.028 ↗
27. L.R. Bao and A.F. Yee, Moisture Diffusion and Hygrothermal Aging in Bismaleimide Matrix Carbon Fiber Composites: Part II—Woven and Hybrid Composites, Compos. Sci. Technol., 2002, 62(16), p 2111–2119.10.1016/S0266-3538(02)00162-8 ↗
28. V.M. Karbhari and G.J. Xian, Hygrothermal Effects on High V-F Pultruded Unidirectional Carbon/Epoxy Composites: Moisture Uptake, Compos. Part B-Eng., 2009, 40(1), p 41–49.10.1016/j.compositesb.2008.07.003 ↗
29. X.W. Liu, J.P. Xiong, Y.W. Lv, and Y. Zuo, Study on Corrosion Electrochemical Behavior of Several Different Coating Systems by EIS, Prog. Org. Coat., 2009, 64(4), p 497–503.10.1016/j.porgcoat.2008.08.012 ↗
30. B. Ramezanzadeh and M.M. Attar, Studying the Corrosion Resistance and Hydrolytic Degradation of an Epoxy Coating Containing ZnO Nanoparticles, Mater. Chem. Phys., 2011, 130(3), p 1208–1219.10.1016/j.matchemphys.2011.08.065 ↗
31. H. Ochs and J. Vogelsang, Effect of temperature cycles on impedance spectra of barrier coatings under immersion conditions, Electrochim Acta, 2004, 49(17–18), p 2973–2980.10.1016/j.electacta.2004.01.056 ↗
32. J.B. Bajat, I. Milosev, Z. Jovanovic, and V.B. Miskovic-Stankovic, Studies on Adhesion Characteristics and Corrosion Behaviour of Vinyltriethoxysilane/Epoxy Coating Protective System on Aluminium, Appl. Surf. Sci., 2010, 256(11), p 3508–3517.10.1016/j.apsusc.2009.12.100 ↗