Comparative In Vitro Study of Ti-12V-9Sn Shape Memory Alloy with C.P. Ti and Ti-12V Alloy for Potential Biomedical Application
Source abstract
Abstract
The microstructure, mechanical properties, and electrochemical behavior of Ti-12V-9Sn shape memory alloy were investigated, with commercial pure titanium (C.P. Ti) and Ti-12V alloy as controls. The metastable β phase was partially retained and α″ martensite phase was obtained in Ti-12V-9Sn alloy, whereas only martensitic phases (α′ and α″) existed in Ti-12V alloy at room temperature. Ti-12V-9Sn alloy exhibited a good combination of strength and elongation, which showed a “double yield” feature, along with a complete shape recovery strain of 4%. The electrochemical measurements indicated that all of the experimental samples exhibited excellent corrosion resistance in the artificial saliva with and without 0.2% NaF, among which Ti-12V-9Sn alloy possessed the lowest corrosion current density in both kinds of simulated body fluids.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia, Ti Based Biomaterials, the Ultimate Choice for Orthopaedic Implants—A Review, Prog. Mater. Sci., 2009, 54(3), p 397–42510.1016/j.pmatsci.2008.06.004 ↗
2. Y.L. Hao, S.J. Li, S.Y. Sun, and R. Yang, Effect of Zr and Sn on Young’s Modulus and Superelasticity of Ti-Nb-Based Alloys, Mater. Sci. Eng. A, 2006, 441(1–2), p 112–11810.1016/j.msea.2006.09.051 ↗
3. B.L. Wang, Y.F. Zheng, and L.C. Zhao, Effects of Sn Content on the Microstructure, Phase Constitution and Shape Memory Effect of Ti-Nb-Sn Alloys, Mater. Sci. Eng. A, 2008, 486(1–2), p 146–15110.1016/j.msea.2007.08.073 ↗
4. T. Maeshima, S. Ushimaru, K. Yamauchi, and M. Nishida, Effect of Heat Treatment on Shape Memory Effect and Superelasticity in Ti-Mo-Sn Alloys, Mater. Sci. Eng. A, 2006, 438–440, p 844–84710.1016/j.msea.2006.05.092 ↗
5. A. Bhattacharjee, S. Bhargava, V.K. Varma, S.V. Kamat, and A.K. Gogia, Effect of β Grain Size on Stress Induced Martensitic Transformation in β Solution Treated Ti-10V-2Fe-3Al Alloy, Scripta Mater., 2005, 53, p 195–20010.1016/j.scriptamat.2005.03.039 ↗
6. T. Furuhara, S. Annakab, Y. Tomiob, and T. Makic, Superelasticity in Ti-10V-2Fe-3Al Alloys with Nitrogen Addition, Mater. Sci. Eng. A, 2006, 438–440, p 825–82910.1016/j.msea.2006.02.084 ↗
7. H. Matsumoto, S. Watanabe, and N. Masahashi, Composition Dependence of Young’s Modulus in Ti-V, Ti-Nb, and Ti-V-Sn Alloys, Metall. Mater. Trans. A, 2006, 37(11), p 3239–324910.1007/BF02586159 ↗
8. H. Matsumoto, S. Watanabe, and S. Hanada, α′ Martensite Ti-V-Sn Alloys with Low Young’s Modulus and High Strength, Mater. Sci. Eng. A, 2007, 448, p 39–4810.1016/j.msea.2006.11.022 ↗
9. H. Matsumoto, A. Chiba, and S. Hanada, Anisotropy of Young’s and Tensile Properties in Cold Rolled α′ Martensite Ti-V-Sn Alloys, Mater. Sci. Eng. A, 2008, 486, p 503–51010.1016/j.msea.2007.11.068 ↗
10. H.H. Huang, Effects of Fluoride and Albumin Concentration on the Corrosion Behavior of Ti-6Al-4V Alloy, Biomaterials, 2003, 24(2), p 275–28210.1016/S0142-9612(02)00315-0 ↗
11. B.L. Wang, Y.F. Zheng, and L.C. Zhao, Electrochemical Corrosion Behavior of Biomedical Ti-22Nb and Ti-22Nb-6Zr Alloys in Saline Medium, Mater. Corros., 2009, 60(10), p 788–79410.1002/maco.200805173 ↗
12. A.W. Hodgson, Y. Mueller, D. Forster, and S. Virtanen, Electrochemical Characterisation of Passive Films on Ti Alloys Under Simulated Biological Conditions, Electrochim. Acta, 2002, 47(12), p 1913–192310.1016/S0013-4686(02)00029-4 ↗