Influence of Heat Treatment on Corrosion Resistance of High-Velocity Oxygen-Fuel Sprayed WC-17Co Coatings on 42CrMo Steel
Source abstract
Abstract
The influence of heat treatment from 500 to 1100 °C on the 5 wt.% H2SO4 solution-induced corrosion resistance of high-velocity oxygen-fuel sprayed WC-17Co coatings on 42CrMo steel was investigated, by using x-ray diffractometer (XRD), scanning electron microscopy (SEM)-energy-dispersive spectrometer (EDS), and polarization curve methods. XRD analysis showed decrease in W2C phase intensity with recrystallization of amorphous Co and generation of new Co3W3C and Co6W6C phases with heat treatment. Porosity distribution did not follow a particular pattern; it initially increased and then decreased with increasing temperature. Corrosion resistance sequence of the as-sprayed and heat-treated coatings in 5 wt.% H2SO4 solution was C-5 > C-9 > C-A > C-7 > C-11. Furthermore, microstructure and phase structure of heat-treated coatings revealed the formation of different discontinuous plate-like oxide films on the surface of the heat-treated coatings which indicated the vital effect of binder structure on the corrosion resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Y.T. Shen, W. Hong, and Y.Q. An, Application of Arc Spraying Technology on Power Plant, Nonferrous Met. (Extr. Metall.), 2006, S0, p 1007–7545
2. H.J. Wang, Thermal Spraying Materials and Application, National Defence Industry Press, Beijing, 2008, p 289–292
3. W.W. Xu and S.H. Li, Analysis of Converter Gas Blower Impeller Corrosion Mechanism, Equipment Management and Repair Practice and Exploration, Wuhan, 2005, p 388–391
4. J.E. Peng and M.Q. Yan, Stress Corrosion in Impeller of Converter Gas Blower and Its Countermeasure, Compress. Blower Fan Technol., 2008, 3, p 47–50
5. G.X. Chen, Q. Huang, and J.L. Hu, Application Status and Development Trend of Manufacturing Technology in Power Plant Equipment Engineering in Thermal Spraying, The Fifteenth International Symposium on Thermal Spraying, Xuzhou, Jiangsu, China, 2012, p 83–87
6. R. Bhatia, H. Singh, and B.S. Sidhu, Hot Corrosion Studies of HVOF-Sprayed Coating on T-91 Boiler Tube Steel at Different Operating Temperatures, J. Mater. Eng. Perform., 2014, 23, p 493–50510.1007/s11665-013-0771-0 ↗
7. T.S. Sidhu, S. Prakash, and R.D. Agrawal, Performance of High-Velocity Oxyfuel-Sprayed Coatings on an Fe-Based Superalloy in Na2SO4-60%V2O5 Environment at 900 °C Part II: Hot Corrosion Behavior of the Coatings, J. Mater. Eng. Perform., 2006, 15(1), p 130–13810.1361/105994906X83411 ↗
8. Z.X. Ding, W.C. Wan, H. Zhao, and J. Liu, Research Progress and Prospect of WC-Co Composite Coatings Prepared by Thermal Spraying, Thermal Spray Technol., 2012, 4(20), p 1–5
9. T.M. Zhang, Study on Microstructure and Abrasive Resistance of WC/Co Coating Prepared by High Velocity Oxy-fuel Thermal Spraying, Metal Hot Work. Technol., 2007, 11, p 48–49
10. X.B. Wu, “Influence of Heat Treatment on the Performances of HVOF Thermal Sprayed WC-12Co Coatings,” Master’s thesis, Hunan University, 2012
11. A.J. Sturgeon and D.C. Buxton, The Electrochemical Corrosion Behavior of HVOF Sprayed Coatings, Proceeding of the 1st Thermal Spray Coating Conference, Montreal, Quebec, Canada, 2000, p 101110.31399/asm.cp.itsc2000p1011 ↗
12. J.M. Guilemany, J. Fernández, J. Delgado, A.V. Benedetti, and F. Climent, Effects of Thickness Coating on the Electrochemical Behaviour of Thermal Spray Cr3C2-NiCr Coatings, Surf. Coat. Technol., 2002, 153, p 107–11310.1016/S0257-8972(01)01679-6 ↗
13. Q. Wang, “Microstructure, Performance and Abrasive Wear Behaviour of Metal Tungsten Carbide Coatings Deposited by HVOF and Oxygen-Acetylene Flame Spray and Fuse,” Doctoral degree thesis, Hunan University, 201110.4028/www.scientific.net/AMR.211-212.182 ↗
14. C.H. Lee and K.O. Min, Effects of Heat Treatment on the Microstructure and Properties of HVOF-Sprayed Ni-Cr-W-Mo-B alloy Coatings, Surf. Coat. Technol., 2000, 132(1), p 49–5710.1016/S0257-8972(00)00740-4 ↗
15. S. Hong, Y.P. Wu, Y.G. Zheng, B. Wang, W.W. Gao, G.Y. Li, G.B. Ying, and J.R. Lin, Effect of Spray Parameters on the Corrosion Behavior of HVOF Sprayed WC-Co-Cr Coatings, J. Mater. Eng. Perform., 2014, 23(4), p 1434–143910.1007/s11665-014-0865-3 ↗
16. J.M. Guilemany, J.M. Paco, J. Nutting, and J. Nutting, Characterization of the W2C Phase Formed During the High Velocity Oxygen Fuel Spraying of a WC-12Co Powder, Metall. Mater. Trans. A., 1999, 30(8), p 1913–192110.1007/s11661-999-0002-3 ↗
17. M.A. Rodríguez, L. Gil, S. Camero, N. Fréty, Y. Santana, and J. Caro, Effects of the Dispersion Time on the Microstructure and Wear Resistance of WC/Co-CNTs HVOF Sprayed Coatings, Surf. Coat. Technol., 2014, 258, p 38–4810.1016/j.surfcoat.2014.10.014 ↗
18. C.A. Poblano-Salas, J.A. Cabral-Miramontes, A. Gallegos-Melgar, H. Ruiz-Luna, J.D. Aguilar-Escobar, D.G. Espinosa-Arbelaez, F. Espinoza-Beltrán, G. Trapaga-Martínez, and J. Muñoz-Saldaña, Effects of VC Additions on the Mechanical Properties of Bimodal WC-Co HVOF Thermal Sprayed Coatings Measured by Nanoindentation, Int. J. Refract. Met. Hard Mater., 2015, 48, p 167–17810.1016/j.ijrmhm.2014.08.016 ↗
19. S. Al-Mutairi, M.S.J. Hashmi, B.S. Yilbas, and J. Stokes, Microstructural Characterization of HVOF/Plasma Thermal Spray of Micro/Nano WC-12%Co Powders, Surf. Coat. Technol., 2015, 264, p 175–18610.1016/j.surfcoat.2014.12.050 ↗
20. A.J. López and J. Rams, Protection of Carbon Steel Against Molten Aluminum Attack and High Temperature Corrosion Using High Velocity Oxygen-Fuel WC-Co Coatings, Surf. Coat. Technol., 2015, 262, p 123–13310.1016/j.surfcoat.2014.12.023 ↗
21. M. Afzal, M. Ajmal, and A. NusairKhan, Surface Modification of Air Plasma Spraying WC-12% Co Cermet Coating by Laser Melting Technique, Opt. Laser Technol., 2014, 56, p 202–20610.1016/j.optlastec.2013.08.017 ↗
22. S.C. Ji, Z.X. Li, J.H. Du, B.L. Zha, C.L. Huang, B.Y. Wang, X.F. Luo, Y.F. Hua, and Y.F. Wang, Microstructure and Phase Analysis of WC-12Co Coatings Sprayed on Ti6Al4V Alloy by HVOF, Rare Met. Mater. Eng., 2012, 41(11), p 2005–2009
23. C.M.F.G. Marques, G.S. Bobrovnitchii, and J.N.F. Holanda, Phase Analysis by X-ray Diffraction on the WC-10Co Doped with Rare-Earth Elements Obtained Under High Pressure, Matéria, 2013, 18, p 10–18
24. P.K. Aw and B.H. Tan, Study of Microstructure, Phase and Microhardness Distribution of HVOF Sprayed Multi-modal Structured and Conventional WC-17Co Coatings, J. Mater. Process. Technol., 2006, 174, p 305–31110.1016/j.jmatprotec.2006.02.006 ↗
25. L.J. Wand, “Research on Corrosion Behavior of the Thermal Sprayed WC-17Co and WC-10Co-4Cr Coatings,” Master’s thesis, Southwest Jiaotong University, 2013.
26. T. Hodgkiess and A. Neville, An Assessment of Galvanic Effects in Thermal Sprayed Coating System, A United Forum for Scientific and Technological Advances, ASM International, Ohio, USA, 1997, p 167
27. X.C. Liu, C.Q. An, and Z.X. Cui, Metal Corrosion Science, National Defence Industrial Press, Beijing, 2001, p 24–25
28. Y.X. Chen, X.B. Liang, Y. Liu, S.C. Wei, and B.S. Xu, Effect of Heat Treatment on Microstructure and Residual Stress of Wire Arc Sprayed High Carbon Steel Coating, Surf. Eng., 2010, 26(6), p 407–41210.1179/174329409X438970 ↗
29. F.J. Chen, Y.N. Pan, C.Y. Lee, and C.S. Lin, Internal Stress Control of Nickel-Phosphorus Electrodeposits Using Pulse Currents, J. Electrochem. Soc., 2009, 157(3), p D154–D15810.1149/1.3285108 ↗
30. Y.P. Cao, W. Xue, A.X. Feng, and Z.C. Han, Measure and Analysis the Residual Stress of the Area of Protective Coating Containing Ni by Pulsed Laser Discrete Scratching Testing, Appl. Laser, 2013, 33(3), p 294–29810.3788/AL20133303.0294 ↗
31. A.R. Nimkerdphol, Y. Otsuka, and Y. Mutoh, Effect of Dissolution/Precipitation on the Residual Stress Redistribution of Plasma-Sprayed Hydroxyapatite Coating on Titanium Substrate in Simulated Body Fluid (SBF), J. Mech. Behav. Biomed. Mater., 2014, 36, p 98–10810.1016/j.jmbbm.2014.04.007 ↗
32. K.M. Ye, Introduction of Corrosion and Protection of metals, National Defence Industrial Press, Beijing, 1993, p 58–73
33. L. Pawlowski, The Science and Engineering of Thermal Spray Coating, Wiley, London, 200810.1002/9780470754085 ↗
34. L.C. Tsao, Effect of Sn Addition on the Corrosion Behavior of Ti-7Cu-Sn Cast Alloys for Biomedical Applications, Mater. Sci. Eng. C, 2015, 46, p 246–25210.1016/j.msec.2014.10.037 ↗
35. H.P. Corporation, Electroless Deposition of Ni-Cu-P Coatings Containing Nano-Al2O3 Particles and Study of Its Corrosion Protective Behaviour in 0.5 M H2SO4, Int. J. Corros., 2014, 2014, p 1–9
36. J.M. Perry, T. Hodgkiess, and A. Neville, A Comparison of the Corrosion Behavior of WC-Co-Cr and WC-Co HVOF Thermally Sprayed Coatings by In Situ Atomic Force Microscopy (AFM), J. Therm. Spray Technol., 2002, 11, p 53610.1361/105996302770348673 ↗