Regulation Mechanism of Novel Thermomechanical Treatment on Microstructure and Properties in Al-Zn-Mg-Cu Alloy
Source abstract
Abstract
Scanning electron microscopy, transmission electron microscopy, tensile test, exfoliation corrosion test, and slow strain rate tensile test were applied to investigate the properties and microstructure of Al-Zn-Mg-Cu alloy processed by final thermomechanical treatment, retrogression reaging, and novel thermomechanical treatment (a combination of retrogression reaging with cold or warm rolling). The results indicate that in comparison with conventional heat treatment, the novel thermomechanical treatment reduces the stress corrosion susceptibility. A good combination of mechanical properties, stress corrosion resistance, and exfoliation corrosion resistance can be obtained by combining retrogression reaging with warm rolling. The mechanism of the novel thermomechanical treatment is the synergistic effect of composite microstructure such as grain morphology, dislocation substructures, as well as the morphology and distribution of primary phases and precipitations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. T. Marlaud, A. Deschamps, F. Bley, W. Lefebvrec, and B. Baroux, Influence of Alloy Composition and Heat Treatment on Precipitate Composition in Al-Zn-Mg-Cu Alloys, Acta Mater., 2010, 58(1), p 248–26010.1016/j.actamat.2009.09.003 ↗
2. J.K. Park and A.J. Ardell, Effect of Retrogression and Reaging Treatments on the Microstructure of Al 7075-T65, Metall. Trans. A, 1984, 15, p 1531–153910.1007/BF02657792 ↗
3. B. Cina, Reducing the Susceptibility of Alloys, Particularly Aluminium Alloys, to Stress Corrosion Cracking: U.S. Patent, 3856584. 1974-12-24.
4. Y.P. Xiao, Q.L. Pan, W.B. Li, X.Y. Liu, and Y.B. He, Influence of Retrogression and Reaging Treatment on Corrosion Behaviour of an Al-Zn-Mg-Cu Alloy, Mater. Design, 2011, 32(4), p 2149–215610.1016/j.matdes.2010.11.036 ↗
5. F. Ostermann, Improved Fatigue Resistance of Al-Zn-Mg Alloys Through Thermomechanical Processing, Mater. Trans., 1971, 2(10), p 2897–2902
6. M.T. Jahn and J. Luo, Tensile and Fatigue Properties of a Thermomechanically Treated 7475 Aluminium Alloy, J. Mater. Sci., 1988, 23(11), p 4115–412010.1007/BF01106845 ↗
7. Ren Jie-ke, Chen Zhi-guo, Huang Yu-jin, and Zhang Ji-shuai, Effect of New Thermomechanical Treatment on Microstructure and Properties of 2E12 Aluminum Alloy, Chin. J. Nonferrous Met., 2014, 24(3), p 643–650 ((in Chinese))
8. D. Wang and Z.Y. Ma, Effect of Prestrain on Microstructure and Stress Corrosion Cracking of Overaged 7050 Aluminum Alloy, J. Alloys Compd., 2009, 469(1/2), p 445–45010.1016/j.jallcom.2008.01.137 ↗
9. N.M. Han, X.M. Zhang, S.D. Liu, and B. Ke, Effects of Prestretching and Ageing on the Strength and Fracture Toughness of Aluminum Alloy 7050, Mater. Sci. Eng. A, 2011, 528(10/11), p 3714–372110.1016/j.msea.2011.01.068 ↗
10. Liu Ji-hua, Li Di, and Liu Pei-ying, Effect of Ageing and Retrogression Treatments on Mechanical and Corrosion Properties of 7075 Aluminum Alloy, Trans. Mater. Heat Treat., 2002, 23(1), p 50–53
11. R. Ayer, J.Y. Koo, J.W. Steeds, and B.K. Park, Microanalytical Study of the Heterogeneous Phases in Commercial Al-Zn-Mg-Cu Alloys, Metall. Trans. A, 1985, 16(A), p 1925–193610.1007/BF02662393 ↗
12. F. Andreatta, H. Terryn, and J.H.W. de Wit, Effect of Solution Heat Treatment on Galvanic Coupling Between Intermetallics and Matrix in AA7075-T6, Corros. Sci., 2003, 45(8), p 1733–174610.1016/S0010-938X(03)00004-0 ↗
13. L.P. Huang, K.H. Chen, S. Li, and M. Song, Influence of High-Temperature Pre-precipitation on Local Corrosion Behaviors of Al-Zn-Mg Alloy, Scr. Mater., 2007, 56(4), p 305–30810.1016/j.scriptamat.2006.09.028 ↗
14. M. Dixit, R.S. Mishra, and K.K. Sankaran, Structure-Property Correlations in Al 7050 and Al 7055 High-Strength Aluminum Alloys, Mater. Sci. Eng. A, 2008, 478(1-2), p 163–17210.1016/j.msea.2007.05.116 ↗
15. Y. Reda, R. Abdel-Karim, and I. Elmahallawi, Improvements in Mechanical and Stress Corrosion Cracking Properties in Al-Alloy 7075 Via Retrogression and Reaging, Mater. Sci. Eng. A, 2008, 485(1-2), p 468–47510.1016/j.msea.2007.08.025 ↗
16. G. Waterloo, V. Hansen, J. Gjønnes, and S.R. Skjervold, Effect of Pre-deformation and Pre-aging at Room Temperature in Al-Zn-Mg-(Cu, Zr) Alloys, Mater. Sci. Eng. A, 2001, 303(1), p 226–23310.1016/S0921-5093(00)01883-9 ↗
17. N. Birbilis, M.K. Cavanaugh, and R.G. Buchheit, Electrochemical Behavior and Localized Corrosion Associated with Al7Cu2Fe Particles in Aluminum Alloy 7075-T651, Corros. Sci., 2006, 48(12), p 4202–421510.1016/j.corsci.2006.02.007 ↗
18. N. Enung and P. Sunara, Improvement of Stress Corrosion Resistance in Aluminum Alloy 7075 through Retrogression and Re-aging Modification, Adv. Mater. Res., 2013, 789, p 467–47510.4028/www.scientific.net/AMR.789.467 ↗
19. G. Peng, K. Chen, S. Chen, and H. Fang, Influence of Repetitious-RRA Treatment on the Strength and SCC Resistance of Al-Zn-Mg-Cu Alloy, Mater. Sci. Eng. A, 2011, 528(12), p 4014–401810.1016/j.msea.2011.01.088 ↗
20. J.F. Li, Z.W. Peng, C.X. Li, Z.Q. Jia, W.J. Chen, and Z.Q. Zheng, Mechanical Properties, Corrosion Behaviors and Microstructures of 7075 Aluminium Alloy with Various Aging Treatments, Trans. Nonferrous Met. Soc. China, 2008, 18(4), p 755–76210.1016/S1003-6326(08)60130-2 ↗
21. U.J. Gang, S.H. Lee, and W.J. Nam, The evolution of Microstructure and Mechanical Properties of a 5052 Aluminium Alloy by the Application of Cryogenic Rolling and Warm Rolling, Mater. Trans., 2009, 50(1), p 82–8610.2320/matertrans.MD200801 ↗
22. P. Nageswara rao and R. Jayaganthan, Effects of Warm Rolling and Ageing After Cryogenic Rolling on Mechanical Properties and Microstructure of Al 6061 Alloy, Mater. Des., 2012, 39, p 226–23310.1016/j.matdes.2012.02.010 ↗