Refurbishment of Continuous Caster Rolls by Laser Cladded Fe-Cr-Ni-Mo-Co Alloy
Source abstract
Abstract
Laser cladded low carbon 12Cr-5Ni-3Mo-5Co-based Fe powder system has been implemented to improve the performance of the vertical section rolls. Compositional, microstructural, and mechanical characterizations of the cladding and substrate materials were carried out as part of the development work. The electron probe microanalyzer was used to observe the distribution of important chemical elements in the clad region. The hardness value of clad region containing almost 100% martensitic structure was found ~ 1.5 times more than the substrate value. The dilatometry test conducted within the temperature range from 100 to 700 °C shows that the coefficient of linear thermal expansion was lower for clad part than the substrate. Oxidation test was carried out at three different temperatures (200, 400, and 600 °C), where results showed that clad part possesses much better oxidation resistance than the substrate. Wear test carried out at 400 °C showed that wear loss for clad material is comparatively smaller than that of the roll material. It was found that the applied laser cladded system offers a good combination of hardness, oxidation resistance, and wear resistance compared to the conventional martensitic stainless steels (X20Cr13 grade).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. J. Viňáš, J. Brezinová, and A. Guzanová, Analysis of the Quality Renovated Continuous Steel Casting Roller, Sadhana Acad. Proc. Eng. Sci., 2013, 38(3), p 477–490. https://doi.org/10.1007/s12046-013-0119-310.1007/s12046-013-0119-3 ↗
2. S. Louhenkilpi, Continuous casting of steel, Treatise on process metallurgy. Elsevier, 2014, p 373–43410.1016/B978-0-08-096988-6.00007-9 ↗
3. Y. Satoh, T. Yamamura, and T. Takimoto, Techniques for Long Life Materials Applied to Continuous Caster Roll, Kawasaki Steel Tech. Rep., 2001, 45, p 42–49.
4. B.G. Thomas, Continuous casting (metallurgy), Yearbook of science and technology. McGraw-Hill, 2004, p 1–6
5. M. Du Toit, and J. Van Niekerk, Improving the Life of Continuous Casting Rolls Through Submerged Arc Cladding with Nitrogen-Alloyed Martensitic Stainless Steel, Weld. World, 2010, 54, p R342–R349. https://doi.org/10.1007/BF0326674810.1007/BF03266748 ↗
6. B.G. Thomas, M.A. Wells, and J. Sengupta, The Use of Water Cooling During the Continuous Casting of Steel and Aluminum Alloys, Metall. Mater. Trans. A, 2005, 36A, p 187–204.
7. A. Sanz, New Coatings for Continuous Casting Rolls, Surf. Coat. Technol., 2004, 177–178, p 1–11. https://doi.org/10.1016/j.surfcoat.2003.06.02410.1016/j.surfcoat.2003.06.024 ↗
8. G.F. Da Silva, S.S.M. Tavares, J.M. Pardal, M.R. Silva, and H.F.G. De Abreu, Influence of Heat Treatments on Toughness and Sensitization of a Ti-alloyed Supermartensitic Stainless Steel, J. Mater. Sci., 2011, 46, p 7737–7744. https://doi.org/10.1007/s10853-011-5753-810.1007/s10853-011-5753-8 ↗
9. K. Kishore, M. Adhikary, G. Mukhopadhyay, and S. Bhattacharyya, Development of Wear Resistant Hammer Heads for Coal Crushing Application Through Experimental Studies and Field Trials, Int. J. Refract. Hard Met., 2019, 79, p 185–196. https://doi.org/10.1016/j.ijrmhm.2018.12.00910.1016/j.ijrmhm.2018.12.009 ↗
10. L. Zhu, P. Xue, Q. Lan, G. Meng, Y. Ren, Z. Yang, P. Xu, and Z. Liu, Recent Research and Development Status of Laser Cladding: A Review, Opt. Laser Technol., 2021, 138, p 1–26. https://doi.org/10.1016/j.optlastec.2021.10691510.1016/j.optlastec.2021.106915 ↗
11. W. Steen and K. Watkins, Coating by Laser Surface Treatment, J. Phys. IV Proc. EDP Sci., 1993, 03, p 581–590. https://doi.org/10.1051/jp4:199396110.1051/jp4:1993961 ↗
12. K. Kishore, N. Jaiswal, A. Prabhakaran, and K.S. Arora, Through-Thickness Microstructure and Wear Resistance of Plasma Transferred Arc Stellite 6 Cladding: Effect of Substrate, CIRP J. Manuf. Sci. Technol., 2023, 42, p 24–35. https://doi.org/10.1016/j.cirpj.2023.01.01410.1016/j.cirpj.2023.01.014 ↗
13. Z. Liu, G. Lian, C. Zhao, J. Peng, and Y. Zhang, The Forming Control Method of Ni35A+ TiC Composite Coatings on Cylindrical Substrate Deposited by Laser Cladding, J. Mater. Eng. Perform., 2023, 32, p 1333–1346. https://doi.org/10.1007/s11665-022-07160-110.1007/s11665-022-07160-1 ↗
14. C. Navas, A. Conde, B.J. Fernández, F. Zubiri, and J. de Damborenea, Laser Coatings to Improve Wear Resistance of Mould Steel, Surf. Coat. Technol., 2005, 194(1), p 136–142. https://doi.org/10.1016/j.surfcoat.2004.05.00210.1016/j.surfcoat.2004.05.002 ↗
15. C.T. Kwok, K.H. Lo, F.T. Cheng, and H.C. Man, Effect of Processing Conditions on the Corrosion Performance of Laser Surface-Melted AISI 440C Martensic Stainless Steel, Surf. Coat. Technol., 2003, 166(2–3), p 221–230. https://doi.org/10.1016/S0257-8972(02)00782-X10.1016/S0257-8972(02)00782-X ↗
16. K. Feng, Y. Chen, P. Deng, Y. Li, H. Zhao, F. Lu, R. Li, J. Huang, and Z. Li, Improved High-Temperature Hardness and Wear Resistance of Inconel 625 Coatings Fabricated by Laser Cladding, J. Mater. Process. Technol., 2017, 243, p 82–91. https://doi.org/10.1016/j.jmatprotec.2016.12.00110.1016/j.jmatprotec.2016.12.001 ↗
17. A. Ray, K.S. Arora, S. Lester, and M. Shome, Laser Cladding of Continuous Caster Lateral Rolls: Microstructure, Wear and Corrosion Characterisation and On-Field Performance Evaluation, J. Mater. Process. Technol., 2014, 214(8), p 1566–1575. https://doi.org/10.1016/j.jmatprotec.2014.02.02710.1016/j.jmatprotec.2014.02.027 ↗
18. P. Maruschak, R. Bishchak, D. Baran, and L. Poberezhny, Failure Analysis of Continuous Casting Rolls Material and Physical Simulation of Thermal Fatigue Loading, Mechanika, 2013, 19(4), p 398–402. https://doi.org/10.5755/j01.mech.19.4.504610.5755/j01.mech.19.4.5046 ↗
19. S. Lee, D.H. Kim, J.H. Ryu, and K. Shin, Correlation of Microstructure and Thermal Fatigue Property of Three Work Rolls, Metall. Mater. Trans. A, 1997, 28(12), p 2595–2608. https://doi.org/10.1007/s11661-997-0017-610.1007/s11661-997-0017-6 ↗
20. Y. Lee, M. Nordin, S.S. Babu, and D.F. Farson, Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition, Metall. Mater. Trans. B, 2014, 45(4), p 1520–1529. https://doi.org/10.1007/s11663-014-0054-710.1007/s11663-014-0054-7 ↗
21. W. Chen, B. Xiao, L. Xu, Y. Han, L. Zhao, and H. Jing, Additive Manufacturing of Martensitic Stainless Steel Matrix Composites with Simultaneously Enhanced Strength-Ductility and Corrosion Resistance, Compos. B. Eng., 2022, 234, p 1–13. https://doi.org/10.1016/j.compositesb.2022.10974510.1016/j.compositesb.2022.109745 ↗
22. E. Altuncu and M. Tarım, Laser Cladding of Martensitic Stainless Steels on Armor Steels, Emerg. Mater. Res., 2019, 9(1), p 55–58. https://doi.org/10.1680/jemmr.18.0012010.1680/jemmr.18.00120 ↗
23. P. Fasihi, O. Kendall, R. Abrahams, P. Mutton, C. Qiu, T. Schläfer, and W. Yan, Tribological Properties of Laser Cladded Alloys for Repair of Rail Components, Materials, 2022, 15(21), p 1–14. https://doi.org/10.3390/ma1521746610.3390/ma15217466 ↗
24. Y.F. Yin and R.G. Faulkner, Physical and elastic behavior of creep-resistant steel, Creep-resistant steels. Woodhead Publishing in Materials, 2008, p 217–24010.1533/9781845694012.2.217 ↗
25. F.C. Hull, S.K. Hwang, J.M. Wells, and R.I. Jaffee, Effect of Composition on Thermal Expansion of Alloys Used in Power Generation, J. Mater. Eng., 1987, 9(1), p 81–92.10.1007/BF02833790 ↗
26. K. Chandra and A. Kranzmann, High Temperature Oxidation of 9–12% Cr Ferritic/Martensitic Steels Under Dual-Environment Conditions, Corros. Eng. Sci. Technol., 2018, 53, p 27–33. https://doi.org/10.1080/1478422X.2017.137404910.1080/1478422X.2017.1374049 ↗
27. V.F. De Souza, A.J. Araújo, J.L.N. Do Santos, C.A.D. Rovere, and A.M.S. De Malafaia, Kinetics Oxidation and Characterization of Cyclically Oxidized Layers at High Temperatures for FeMnSiCrNiCe and FeSiCrNi Alloys, Mater. Res., 2017, 20, p 365–373. https://doi.org/10.1590/1980-5373-mr-2017-009810.1590/1980-5373-mr-2017-0098 ↗
28. A.V. Makarov, A.E. Kudryashov, S.V. Nevezhin, A.S. Gerasimov, and A.A. Vladimirov, Reconditioning of Continuous Casting Machine Rollers by Laser Cladding, J. Phys. Conf. Ser., 2020, 1679, p 42–47. https://doi.org/10.1088/1742-6596/1679/4/04204710.1088/1742-6596/1679/4/042047 ↗
29. L.D. Conceição and A.S.C.M. D’Oliveira, The Effect of Oxidation on the Tribolayer and Sliding Wear of a Co-Based Coating, Surf. Coat. Technol., 2016, 288, p 69–78. https://doi.org/10.1016/j.surfcoat.2016.01.01310.1016/j.surfcoat.2016.01.013 ↗
30. F. Shu, B. Wang, S. Zhang, S. Sui, X. Zhang, and J. Zhao, Microstructure, High-Temperature Wear Resistance, and Corrosion Resistance of Laser Cladded Co-Based Coating, J. Mater. Eng. Perform., 2021, 30, p 3370–3380. https://doi.org/10.1007/s11665-021-05704-510.1007/s11665-021-05704-5 ↗