Prediction of Contact Fatigue Life of Alloy Cast Steel Rolls Using Back-Propagation Neural Network
Source abstract
Abstract
In this study, an artificial neural network (ANN) was employed to predict the contact fatigue life of alloy cast steel rolls (ACSRs) as a function of alloy composition, heat treatment parameters, and contact stress by utilizing the back-propagation algorithm. The ANN was trained and tested using experimental data and a very good performance of the neural network was achieved. The well-trained neural network was then adopted to predict the contact fatigue life of chromium alloyed cast steel rolls with different alloy compositions and heat treatment processes. The prediction results showed that the maximum value of contact fatigue life was obtained with quenching at 960 °C, tempering at 520 °C, and under the contact stress of 2355 MPa. The optimal alloy composition was C-0.54, Si-0.66, Mn-0.67, Cr-4.74, Mo-0.46, V-0.13, Ni-0.34, and Fe-balance (wt.%). Some explanations of the predicted results from the metallurgical viewpoints are given. A convenient and powerful method of optimizing alloy composition and heat treatment parameters of ACSRs has been developed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Mechanical stress and fatigue analysis · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. G. Sun, Y. Zhang, C. Liu, K. Luo, Q. Tao, and P. Li, Microstructure and Wear Resistance Enhancement of Cast Steel Rolls by Laser Surface Alloying NiCr-Cr3C2, Mater. Des., 2010, 31, p 2737–274410.1016/j.matdes.2010.01.021 ↗
2. Y. Fujii and K. Maeda, Flaking Failure in Rolling Contact Fatigue Caused by Indentations on Mating Surface (I): Reproduction of Flaking Failure Accompanied by Cracks Extending Bi-Directionally Relative to the Load-Movement, Wear, 2002, 252, p 787–79810.1016/S0043-1648(02)00033-9 ↗
3. Y. Fujii and K. Maeda, Flaking Failure in Rolling Contact Fatigue Caused by Indentations on Mating Surface (II): Formation Process of Flaking Failure Accompanied by Cracks Extending Bi-Directionally Relative to the Load-Movement, Wear, 2002, 252, p 799–81010.1016/S0043-1648(02)00034-0 ↗
4. Y. Fujii and K. Maeda, Flaking Failure in Rolling Contact Fatigue Caused by Indentations on Mating Surface (III): Mechanism of Crack Growth in the Direction Opposite to the Load-Movement, Wear, 2002, 252, p 811–82310.1016/S0043-1648(02)00035-2 ↗
5. L. Dimitrov, D. Michalopoulos, Ch.Alk. Apostolopoulos, and T.D. Neshkov, Investigation of Contact Fatigue of High Strength Steel Gears Subjected to Surface Treatment, J. Mater. Eng. Perform., 2009, 18, p 939–94610.1007/s11665-008-9321-6 ↗
6. Y. Kimura, M. Sekizawa, and A. Nitanai, Wear and Fatigue in Rolling Contact, Wear, 2002, 253, p 9–1610.1016/S0043-1648(02)00077-7 ↗
7. Y. Gao, Influence of Deep-Nitriding and Shot Peening on Rolling Contact Fatigue Performance of 32Cr3MoVA Steel, J. Mater. Eng. Perform., 2008, 17, p 455–45910.1007/s11665-007-9155-7 ↗
8. P. Orbanić and M. Fajdiga, A Neural Network Approach to Describing the Fretting Fatigue in Aluminium-Steel Couplings, Int. J. Fatigue, 2003, 25, p 201–20710.1016/S0142-1123(02)00113-5 ↗
9. N.B. Fredj, M.B. Nasr, A.B. Rhouma, C. Braham, and H. Sidhom, Fatigue Life Improvements of the AISI, 304 Stainless Steel Ground Surfaces by Wire Brushing, J. Mater. Eng. Perform., 2004, 13, p 564–57410.1361/15477020420819 ↗
10. B. Li, L. Reis, and M. de Freitas, Simulation of Cyclic Stress/Strain Evolutions for Multiaxial Fatigue Life Prediction, Int. J. Fatigue, 2006, 28, p 451–45810.1016/j.ijfatigue.2005.07.038 ↗
11. B.P. Conner, T.C. Lindley, T. Nicholas, and S. Suresh, Application of a Fracture Mechanics Based Life Prediction Method for Contact Fatigue, Int. J. Fatigue, 2004, 26, p 511–52010.1016/j.ijfatigue.2003.09.003 ↗
12. K.S. Kim, K.M. Nam, G.J. Kwak, and S.M. Hwang, A Fatigue Life Model for 5% Chrome Work Roll Steel Under Multiaxial Loading, Int. J. Fatigue, 2004, 26, p 683–68910.1016/j.ijfatigue.2003.11.005 ↗
13. H. White, Connectionist Non-parametric Regression: Multilayer Feed Forward Networks Can Learn Arbitrary Mappings, Neural Netw., 1990, 3, p 535–54910.1016/0893-6080(90)90004-5 ↗
14. M.Q. Li, X.M. Liu, and A.M. Xiong, Prediction of the Mechanical Properties of Forged TC11 Titanium Alloy by ANN, J. Mater. Process. Technol., 2002, 121, p 1–410.1016/S0924-0136(01)01006-8 ↗
15. Y.L. Han, Artificial Neural Network Technology as a Method to Evaluate the Fatigue Life of Weldments with Welding Defects, Int. J. Press. Vessels Pip., 1995, 63, p 205–20910.1016/0308-0161(94)00055-N ↗
16. J.A. Lee, D.P. Almond, and B. Harris, The Use of Neural Networks for the Prediction of Fatigue Lives of Composite Materials, Composites A, 1999, 30, p 1159–116910.1016/S1359-835X(99)00027-5 ↗
17. T.T. Pleune and O.K. Chopra, Using Artificial Neural Networks to Predict the Fatigue Life of Carbon and Low-Alloy Steels, Nucl. Eng. Des., 2000, 197, p 1–1210.1016/S0029-5493(99)00252-6 ↗
18. V.S. Srinivasan, M.K. Valsan, K.B.S. Rao, S.L. Mannan, and B. Raj, Low Cycle Fatigue and Creep-Fatigue Interaction Behavior of 316L (N) Stainless Steel and Life Prediction by Artificial Neural Network Approach, Int. J. Fatigue, 2003, 25, p 1327–133810.1016/S0142-1123(03)00064-1 ↗
19. K. Genel, Application of Artificial Neural Network for Predicting Strain-Life Fatigue Properties of Steels on the Basis of Tensile Tests, Int. J. Fatigue, 2004, 26, p 1027–103510.1016/j.ijfatigue.2004.03.009 ↗
20. J.M. Park and H.T. Kang, Prediction of Fatigue Life for Spot Welds Using Back-Propagation Neural Networks, Mater. Des., 2007, 28, p 2577–258410.1016/j.matdes.2006.10.014 ↗
21. M.D. Mathew, D.W. Kim, and W.S. Ryu, A Neural Network Model to Predict Low Cycle Fatigue Life of Nitrogen-Alloyed 316L Stainless Steel, Mater. Sci. Eng. A, 2008, 474, p 247–25310.1016/j.msea.2007.04.018 ↗
22. M.R. Green, W.M. Rainforth, M.F. Frolish, and J.H. Beynon, The Effect of Microstructure and Composition on the Rolling Contact Fatigue Behaviour of Cast Bainitic Steels, Wear, 2007, 263, p 756–76510.1016/j.wear.2007.01.070 ↗
23. R. Rojas, Neural Network, a Systematic Introduction, Springer, Berlin, 1996
24. M. Smith, Neural Networks for Statistical Modeling, Van Nostrand Reinhold, New York, 1993
25. J.M. Zurad, Introduction to Artificial Neural Networks, West Publishing Co, St. Paul, 1992
26. S. Haykin, Neural Networks, a Comprehensive Foundation, MacMillan College Publishing Company, New York, 1994
27. Z. Guo and W. Sha, Modeling the Correlation Between Processing Parameters and Properties of Maraging Steels Using Artificial Neural Network, Comput. Mater. Sci., 2004, 29, p 12–2810.1016/S0927-0256(03)00092-2 ↗
28. M.S. Ozerdem and S. Kolukisa, Artificial Neural Network Approach to Predict the Mechanical Properties of Cu-Sn-Pb-Zn-Ni Cast Alloys, Mater. Des., 2009, 30, p 764–76910.1016/j.matdes.2008.05.019 ↗
29. L. Xu, J. Xing, S. Wei, Y. Zhang, and R. Long, Optimization of Heat Treatment Technique of High-Vanadium High-Speed Steel Based on Back-Propagation Neural Networks, Mater. Des., 2007, 28, p 1425–143210.1016/j.matdes.2006.03.022 ↗
30. L. Xu, J. Xing, S. Wei, Y. Zhang, and R. Long, Optimisation of Chemical Composition of High Speed Steel with High Vanadium Content for Abrasive Wear Using an Artificial Neural Network, Mater. Des., 2007, 28, p 1031–103710.1016/j.matdes.2005.10.015 ↗