Response of Triaxial State of Stress to Creep Rupture Life and Ductility of 316 LN Austenitic Stainless Steel
Source abstract
Abstract
In the present investigation, the effect of triaxial state of stress on creep rupture life and ductility of 316 LN stainless steel has been assessed. The creep tests were carried out on both smooth and notched specimens of the steel at 873 K in the stress range of 270-340 MPa. The notched specimens had root radius ranging from 0.83 mm to 5 mm. The detailed finite element analysis has been carried out to assess the triaxial state of stress across the notch incorporating Norton’s law as creep deformation governing mechanism. The creep rupture life of the steel increased in presence of triaxial stresses and extent of which was more at lower net applied stresses and higher triaxiality (sharper notch). The reduction in effective stress in presence of notch resulted in higher creep rupture life of the steel under triaxial stresses. The fracture surfaces revealed mixed mode failure consisting of dimple ductile and intergranular creep cavitation for all testing conditions, however, extent of cavitation was higher for relatively higher triaxialities and lower net applied stresses. The creep ductility of the steel was found to decrease drastically under triaxial state of stress. The triaxial rupture life and creep ductility of the steel have been assessed based on different models on incorporating different components of stresses at the skeletal point.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. B.F. Dyson and M. S. Loveday, in Proceedings of the 3 rd TUTAM Symposium on Creep in Structures, ed. by A.R.S. Ponter and D.R. Hayhurst, Pergamon Press, Oxford, 1980, p 406–42110.1007/978-3-642-81598-0_27 ↗
2. P. Lukas, P. Preclik, and J. Cadek, Notch Effects on Creep Behaviour of CMSX-4 Superalloy Single Crystals, Mater. Sci. Eng., A, 2001, 298, p 84–8910.1016/S0921-5093(00)01288-0 ↗
3. S.E. Ng, G.A. Webster, and B.F. Dyson, in Proceedings of the 5th International Conference on Fracture, D. Francois, Ed., Pergamon Press, Cannes, 1981, p 1275–1283
4. K.D. Al-Faddagh, G.A. Webster, and B.F. Dyson, in: Proceedings of the 4th International Conference on Mechanical Behaviour of Materials, J. Carlsson and N.G. Ohlson, Ed., Pergamon Press, Sweden, 1983, p 289–29510.1016/B978-1-4832-8372-2.50033-6 ↗
5. S. Goyal, K. Laha, C.R. Das, S.P. Selvi, and M.D. Mathew, Finite Element Analysis of Uniaxial and Multiaxial State of Stress on Creep Rupture Behaviour of 2.25Cr- 1Mo Steel, Mater. Sci. Eng., A, 2013, 563, p 68–7710.1016/j.msea.2012.11.038 ↗
6. Y. Chang, H. Xu, Y. Ni, X. Lan, and H. Li, Research on Representative Stress and Fracture Ductility of P92 Steel Under Multiaxial Creep, Eng. Fail. Anal., 2016, 59, p 140–15010.1016/j.engfailanal.2015.09.011 ↗
7. D.X. Zhang, J.P. Wang, Z.X. Wen, D.S. Liu, and Z.F. Yue, V-Notched Bar Creep Life Prediction: GH3536 Ni-Based Superalloy Under Multiaxial Stress State, J. Mater. Eng. Perform., 2016, 25, p 2959–296810.1007/s11665-016-2081-9 ↗
8. G. Eggeler and C. Wiesner, A Numerical Study of Parameters Controlling Stress Redistribution in Circular Notched Specimens During Creep, J. Strain Anal., 1993, 28, p 13–2210.1243/03093247V281013 ↗
9. D.R. Hayhurst and J.T. Henderson, Creep Stress Redistribution in Notched Bars, Int. J. Mech. Sci., 1977, 19, p 133–14610.1016/0020-7403(77)90073-X ↗
10. D.R. Hayhurst and G.A. Webster, in: Techniques for multiaxial creep testing, D.J. Gooch and I.M. How, Ed., Elsevier Applied Science, Amsterdam, 1986, p 137–17510.1007/978-94-009-3415-3_9 ↗
11. G.A. Webster, S.R. Holdsworth, M.S. Loveday, K. Nikbin, I.J. Perrin, H. Purper, R.P. Skelton, and M.W. Spindler, A Code of Practice for Conducting Notched Bar Creep Tests and for Interpreting the Data, Fatigue Fract. Eng. Mater. Struct., 2004, 27, p 319–34210.1111/j.1460-2695.2004.00765.x ↗
12. D.R. Hayhurst, Creep Rupture Under Multi-axial States of Stress, J. Mech. Phy. Solids, 1972, 20, p 381–39010.1016/0022-5096(72)90015-4 ↗
13. B.J. Cane, in: Proceedings of the 5th International Conference on Fracture, D. Francois, Ed., Pergamon Press, Cannes, 1981, p 1285–1293
14. W.D. Nix, J.C. Earthman, G. Eggeler, and B. Ilschner, The Principal Facet Stress as a Parameter for Predicting Creep Rupture Under Multiaxial Stresses, Acta Metall., 1989, 37, p 1067–107710.1016/0001-6160(89)90103-X ↗
15. R.L. Huddleston, An Improved Multiaxial Creep Rupture Strength Criterion, ASME J. Press. Vessel Technol., 1985, 107, p 421–42910.1115/1.3264476 ↗
16. S. Goyal, K. Laha, and M.D. Mathew, Analysis of Creep Rupture Behaviour of Cr-Mo Ferritic Steels in the Presence of Notch, Metall. Mater. Trans. A, 2015, 46, p 205–21710.1007/s11661-014-2609-2 ↗
17. W.D. Pilkey and D.F. Pilkey, Peterson’s Stress Concentration Factors, 3rd ed., Hoboken, Wiley, 2008
18. G.A. Webster, K.M. Nikbin, and F. Biglari, Finite Element Analysis of Notched Bar Skeletal Point Stresses and Dimension Changes Due to Creep, Fatigue Fract. Eng. Mater. Struct., 2004, 27, p 297–30310.1111/j.1460-2695.2004.00704.x ↗
19. ASME, Boiler & Pressure Vessel Code Section III, Division 1, Subsection NH, American Society of Mechanical Engineers, New York, 2013
20. RCC-MR, Design and Construction Rules for Mechanical Components of Nuclear Installations, AFCEN, Paris, 2007
21. S. Goyal, K. Laha, and M.D. Mathew, Creep Life Prediction of Modified 9Cr-1Mo Steel Under Multiaxial State of Stress, Procedia Eng., 2014, 86, p 105–15710.1016/j.proeng.2014.11.023 ↗
22. P.F. Aplin and G.F. Eggeler, in: Proceedings of the International Conference on Mechanics of Creep Brittle Materials, ed. by A.C.F. Cocks and A.R.S. Ponter, Elsevier Applied Science, 1988, p 245–261.10.1007/978-94-009-1117-8_18 ↗
23. D. Hull and D.E. Rimmer, The Growth of Grain Boundary Voids Under Stress, Philos. Mag., 1959, 4, p 673–68710.1080/14786435908243264 ↗
24. F.A. McClintock, A criterion for Ductile Fracture by the Growth of Holes, J. Appl. Mech., 1968, 35, p 363–37110.1115/1.3601204 ↗
25. A.C.F. Cocks and M.F. Ashby, Intergranular Fracture During Power-Law Creep Under Multiaxial Stresses, Metal Sci., 1980, 14, p 395–40210.1179/030634580790441187 ↗
26. J.R. Rice and D.M. Tracey, On Ductile-Enlargement of Voids in Triaxial Stress Fields, J. Mech. Phy. Solids, 1969, 17, p 201–21710.1016/0022-5096(69)90033-7 ↗
27. M.J. Manjoine, Ductility Indices at Elevated Temperature, ASME J Eng. Mater. Technol., 1975, 97, p 156–16110.1115/1.3443276 ↗
28. M.W. Spindler, The Multiaxial Creep Ductility of Austenitic Stainless Steels, Fatigue Fract. Eng. Mater. Struct., 2004, 27, p 273–28110.1111/j.1460-2695.2004.00732.x ↗
29. M.W. Spindler, The Multiaxial and Uniaxial Creep Ductility of Type 304 Steel as a Function of Stress and Strain Rate, Mater. High Temp., 2004, 21, p 47–5410.1179/mht.2004.007 ↗