Fabrication of 7075-0.25Sc-0.15Zr Alloy with Excellent Damping and Mechanical Properties by FSP and T6 Treatment
Source abstract
Abstract
This study investigated the effects of Sc and Zr additions, friction stir processing (FSP), and subsequent solid solution and artificial aging (T6) treatment on the microstructure, damping capacity, and mechanical properties of 7075 Al alloy. The minor Sc and Zr additions promoted the grain refinement of this alloy during FSP and inhibited the growth of fine equiaxed grains in the FSP sample during subsequent T6 treatment. Thus, the fine equiaxed grain structure and high density of the η′ precipitated phase were simultaneously obtained in the 7075 Al alloy containing Sc and Zr after FSP and T6 treatment, and this sample exhibited superior mechanical properties and damping capacity to those of the 7075 Al alloy after T6 treatment. This work provides an effective strategy for preparing Al alloys with excellent damping capacity and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. T. Aoba, M. Kobayashi, and H. Miura, Effects of Aging on Mechanical Properties and Microstructure of Multi-directionally Forged 7075 Aluminum Alloy, Mater. Sci. Eng. A, 2017, 700, p 220–22510.1016/j.msea.2017.06.017 ↗
2. Y. Chen, C.Y. Liu, B. Zhang, Z.Y. Ma, W.B. Zhou, H.J. Jiang, H.F. Huang, and L.L. Wei, Effects of Friction Stir Processing and Minor Sc Addition on the Microstructure, Mechanical Properties, and Damping Capacity of 7055 Al Alloy, Mater. Charact., 2018, 135, p 25–3110.1016/j.matchar.2017.11.030 ↗
3. H.J. Jiang, C.Y. Liu, B. Zhang, P. Xue, Z.Y. Ma, K. Luo, M.Z. Ma, and R.P. Liu, Simultaneously Improving Mechanical Properties and Damping Capacity of Al-Mg-Si Alloy Through Friction Stir Processing, Mater. Charact., 2017, 131, p 425–43010.1016/j.matchar.2017.07.037 ↗
4. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R, 2005, 50, p 1–7810.1016/j.mser.2005.07.001 ↗
5. W.B. Zhou, C.Y. Liu, P.F. Yu, B. Zhang, Z.Y. Ma, K. Luo, M.Z. Ma, and R.P. Liu, Effect of Scandium on Microstructure and Mechanical Properties of High Zinc Concentration Aluminum Alloys, Mater. Charact., 2017, 127, p 371–37810.1016/j.matchar.2017.03.028 ↗
6. C.Y. Liu, X. Zhang, C.Q. Xia, Z.H. Feng, S.G. Liu, Z.G. Zhang, M.Z. Ma, and R.P. Liu, Effects of Sc Addition and Rolling on the Microstructure and Mechanical Properties of Al-35Zn Alloys, Mater. Sci. Eng. A, 2017, 703, p 45–5310.1016/j.msea.2017.07.042 ↗
7. Y. Deng, Z.M. Yin, J.Q. Duan, K. Zhao, B. Tang, and Z.B. He, Evolution of Microstructure and Properties in a New Type 2 mm Al–Zn–Mg–Sc–Zr Alloy Sheet, J. Alloys Compd., 2012, 517, p 118–12610.1016/j.jallcom.2011.12.049 ↗
8. B.A. Chen, L. Pan, R.H. Wang, G. Liu, P.M. Cheng, L. Xiao, and J. Sun, Effect of Solution Treatment on Precipitation Behaviors and Age Hardening Response of Al-Cu Alloys with Sc Addition, Mater. Sci. Eng. A, 2011, 530, p 607–61710.1016/j.msea.2011.10.030 ↗
9. L. Jiang, J.K. Li, G. Liu, R.H. Wang, B.A. Chen, J.Y. Zhang, J. Sun, M.X. Yang, G. Yang, J. Yang, and X.Z. Cao, Length-Scale Dependent Microalloying Effects on Precipitation Behaviors and Mechanical Properties of Al-Cu Alloys with Minor Sc Addition, Mater. Sci. Eng. A, 2015, 637, p 139–15410.1016/j.msea.2015.04.035 ↗
10. G. Li, N.Q. Zhao, T. Liu, J.J. Li, C.N. He, C.S. Shi, E.Z. Liu, and J.W. Sha, Effect of Sc/Zr Ratio on the Microstructure and Mechanical Properties of New Type of Al–Zn–Mg–Sc–Zr Alloys, Mater. Sci. Eng. A, 2014, 617, p 219–22710.1016/j.msea.2014.08.041 ↗
11. B. Li, Q.L. Pan, X. Huang, and Z.M. Yin, Microstructures and Properties of Al-Zn-Mg-Mn Alloy with Trace Amounts of Sc and Zr, Mater. Sci. Eng. A, 2014, 616, p 219–22810.1016/j.msea.2014.08.024 ↗
12. X. Huang, Q.L. Pan, B. Li, Z.M. Liu, Z.Q. Huang, and Z.M. Yin, Microstructure, Mechanical Properties and Stress Corrosion Cracking of Al-Zn-Mg-Zr Alloy Sheet with Trace Amount of Sc, J. Alloys Compd., 2015, 650, p 805–82010.1016/j.jallcom.2015.08.011 ↗
13. Y.J. Shi, Q.L. Pan, M.J. Li, X. Huang, and B. Li, Effect of Sc and Zr Additions on Corrosion Behaviour of Al-Zn-Mg-Cu Alloys, J. Alloys Compd., 2014, 612, p 42–5010.1016/j.jallcom.2014.05.128 ↗
14. M. Zhang, T. Liu, C.N. He, J. Ding, E.Z. Liu, C.S. Shi, J.J. Li, and N.Q. Zhao, Evolution of Microstructure and Properties of Al-Zn-Mg-Cu-Sc-Zr Alloy During Aging Treatment, J. Alloys Compd., 2016, 658, p 946–95110.1016/j.jallcom.2015.10.296 ↗
15. Y.L. Duan, G.F. Xu, X.Y. Peng, Y. Deng, Z. Li, and Z.M. Yin, Effect of Sc and Zr Additions on Grain Stability and Superplasticity of the Simple Thermal–mechanical Processed Al-Zn-Mg Alloy Sheet, Mater. Sci. Eng. A, 2015, 648, p 80–9110.1016/j.msea.2015.09.049 ↗
16. B.H. Luo, Z.H. Bai, and Y.Q. Xie, The Effects of Trace Sc and Zr on Microstructure and Internal Friction of Zn-Al Eutectoid Alloy, Mater. Sci. Eng. A, 2004, 370, p 172–17610.1016/j.msea.2002.12.007 ↗
17. Z.H. Ma, F.S. Han, J.N. Wei, and J.C. Gao, Effects of Macroscopic Defects on the Damping Behavior of Aluminum and Zn-27 Pct Al Alloy, Metall. Mater. Trans. A, 2000, 32, p 2657–266110.1007/s11661-001-0056-3 ↗
18. H.J. Jiang, C.Y. Liu, Y. Chen, Z.X. Yang, H.F. Huang, L.L. Wei, Y.B. Li, and H.Q. Qi, Evaluation of Microstructure, Damping Capacity and Mechanical Properties of Al-35Zn and Al-35Zn-0.5Sc Alloys, J. Alloy Compd., 2018, 739, p 114–12110.1016/j.jallcom.2017.12.234 ↗
19. F.C. Liu, Z.Y. Ma, and F.C. Zhang, High Strain Rate Superplasticity in a Micro-grained Al–Mg–Sc Alloy with Predominant High Angle Grain Boundaries, J. Mater. Sci. Technol., 2012, 28, p 1025–103010.1016/S1005-0302(12)60168-6 ↗
20. F.C. Liu, Z.Y. Ma, and L.Q. Chen, Low-Temperature Superplasticity of Al-Mg-Sc Alloy Produced by Friction Stir Processing, Scr. Mater., 2009, 60, p 968–97110.1016/j.scriptamat.2009.02.021 ↗
21. F.C. Liu and Z.Y. Ma, Achieving Exceptionally High Superplasticity at High Strain Rates in a Micrograined Al-Mg-Sc Alloy Produced by Friction Stir Processing, Scr. Mater., 2008, 59, p 882–88510.1016/j.scriptamat.2008.06.035 ↗
22. I. Charit and R.S. Mishra, Low Temperature Superplasticity in a Friction-stir-processed Ultrafine Grained Al-Zn-Mg-Sc Alloy, Acta Mater., 2005, 53, p 4211–422310.1016/j.actamat.2005.05.021 ↗
23. K. Wang, F.C. Liu, Z.Y. Ma, and F.C. Zhang, Realization of Exceptionally High Elongation at High Strain Rate in a Friction Stir Processed Al-Zn-Mg-Cu Alloy with the Presence of Liquid Phase, Scr. Mater., 2011, 64, p 572–57510.1016/j.scriptamat.2010.11.050 ↗
24. F.C. Liu, B.L. Xiao, K. Wang, and Z.Y. Ma, Investigation of Superplasticity in Friction Stir Processed 2219Al Alloy, Mater. Sci. Eng. A, 2010, 527, p 4191–419610.1016/j.msea.2010.03.065 ↗
25. C.Y. Liu, B. Zhang, Z.Y. Ma, G.B. Teng, L.L. Wei, W.B. Zhou, and X.Y. Zhang, Effects of Pre-aging and Minor Sc Addition on the Microstructure and Mechanical Properties of Friction Stir Processed 7055 Al Alloy, Vacuum, 2018, 149, p 106–11310.1016/j.vacuum.2017.12.030 ↗
26. C.Y. Liu, B. Qu, P. Xue, Z.Y. Ma, K. Luo, M.Z. Ma, and R.P. Liu, Fabrication of Large-bulk Ultrafine Grained 6061 Aluminum Alloy by Rolling and Low-heat-input Friction Stir Welding, J. Mater. Sci. Tech., 2018, 34, p 112–11810.1016/j.jmst.2017.02.008 ↗
27. P. Xue, Z.Y. Huang, B.B. Wang, Y.Z. Tian, W.G. Wang, B.L. Xiao, and Z.Y. Ma, Intrinsic High Cycle Fatigue Behavior of Ultrafine Grained Pure Cu with Stable Structure, Sci. China Mater., 2016, 59, p 531–53710.1007/s40843-016-5068-6 ↗
28. P. Xue, B.L. Xiao, Q. Zhang, and Z.Y. Ma, Achieving Friction Stir Welded Pure Copper Joints with Nearly Equal Strength to the Parent Metal via Additional Rapid Cooling, Scr. Mater., 2011, 64, p 1051–105410.1016/j.scriptamat.2011.02.019 ↗
29. C.Y. Liu, H.J. Jiang, B. Zhang, and Z.Y. Ma, High Damping Capacity of Al Alloys Produced by Friction Stir Processing, Mater. Charact., 2018, 136, p 382–38710.1016/j.matchar.2018.01.009 ↗