Corrosion Behavior of HVOF-Sprayed Fe-Based Alloy Coating in Various Solutions
Source abstract
Abstract
A Fe-based amorphous/nanocrystalline coating was prepared by the high-velocity oxygen fuel (HVOF) spraying process. The coating was characterized by x-ray diffraction, scanning electron microscopy and transmission electron microscopy. The corrosion resistances of the Fe-based coating and a reference electroplated hard chromium (EHC) coating were evaluated in a 3.5% NaCl solution, a 1 mol/L HCl solution and a 1 mol/L NaOH solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). All of the results indicated that the corrosion resistance of the Fe-based coating was superior to the resistance of the EHC coating in both the 3.5% NaCl solution and the 1 mol/L HCl solution due to the dense structure and fewer defects of the Fe-based coating. However, the corrosion resistance of the Fe-based coating was inferior to corrosion resistance of the EHC coating in the 1 mol/L NaOH solution. This could be ascribed to the drastic passivation of the EHC coating in an alkaline environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Electrodeposition and Electroless Coatings · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R.Q. Guo, C. Zhang, Y. Yang, Y. Peng, and L. Liu, Corrosion and Wear Resistance of a Fe Based Amorphous Coating in Underground Environment, Intermetallics, 2012, 30, p 9410.1016/j.intermet.2012.03.026 ↗
2. A. Milanti, V. Matikainen, H. Koivuluoto, G. Bolelli, L. Lusvarghi, and P. Vuoristo, Effect of Spraying Parameters on the Microstructural and Corrosion Properties of HVAF-Sprayed Fe-Cr-Ni-B-C Coatings, Surf. Coat. Technol., 2015, 277, p 8110.1016/j.surfcoat.2015.07.018 ↗
3. Z. Zeng, N. Sakoda, T. Tajiri, and S. Kuroda, Structure and Corrosion Behavior of 316L Stainless Steel Coatings Formed by HVAF Spraying With and Without Sealing, Surf. Coat. Technol., 2008, 203, p 28410.1016/j.surfcoat.2008.09.011 ↗
4. J.M. Guilemany, N. Espallargas, P.H. Suegama, and A.V. Benedetti, Comparative Study of Cr3C2-NiCr Coatings Obtained by HVOF and Hard Chromium Coatings, Corros. Sci., 2006, 48, p 299810.1016/j.corsci.2005.10.016 ↗
5. J. Kawakita, T. Fukushima, S. Kuroda, and T. Kodama, Corrosion Behaviour of HVOF Sprayed SUS316L Stainless Steel in Seawater, Corros. Sci., 2002, 44, p 256110.1016/S0010-938X(02)00030-6 ↗
6. J.F. Flores, A. Neville, N. Kapur, and A. Gnanavelu, Corrosion and Erosion–Corrosion Processes of Metal-Matrix Composites in Slurry Conditions, J. Mater. Eng. Perform., 2012, 21, p 39510.1007/s11665-011-9926-z ↗
7. B. Xu, M. Shining, and J. Wang, Application of Electric Arc Spraying Technique to Enhance Corrosion Resistance of Steel Structures on Ships, Surf. Eng., 1995, 11, p 3810.1179/sur.1995.11.1.38 ↗
8. K. Cooke, G. Oliver, V. Buchanan, and N. Palmer, Optimisation of the Electric Wire Arc-Spraying Process for Improved Wear Resistance of Sugar Mill Roller Shells, Surf. Coat. Technol., 2007, 202, p 18510.1016/j.surfcoat.2007.05.015 ↗
9. Y.C. Zhu, K. Yukimura, C.X. Ding, and P.Y. Zhang, Tribological Properties of Nanostructured and Conventional WC-Co Coatings Deposited by Plasma Spraying, Thin Solid Films, 2001, 388, p 27710.1016/S0040-6090(01)00805-7 ↗
10. D.A. Stewart, P.H. Shipway, and D.G. McCartney, Abrasive Wear Behaviour of Conventional and Nanocomposite HVOF-Sprayed WC-Co Coatings, Wear, 1999, 255, p 78910.1016/S0043-1648(99)00032-0 ↗
11. L. Ajdelsztajn, J.A. Picas, G.E. Kim, F.L. Bastian, J. Schoenung, and V. Probvenzano, Oxidation Behavior of HVOF Sprayed Nanocrystalline NiCrAlY Powder, Mater. Sci. Eng. A Struct., 2002, 338, p 3310.1016/S0921-5093(02)00008-4 ↗
12. Y.P. Wu, P.H. Lin, G.Z. Xie, J. Hu, and M. Cao, Formation of Amorphous and Nanocrystalline Phases in High Velocity Oxy-Fuel Thermally Sprayed a Fe-Cr-Si-B-Mn Alloy, Mater. Sci. Eng. A Struct., 2006, 430, p 24
13. Z. Zhou, L. Wang, F.C. Wang, H.F. Zhang, Y.B. Liu, and S.H. Xu, Formation and Corrosion Behavior of Fe-Based Amorphous Metallic Coatings by HVOF Thermal Spraying, Surf. Coat. Technol., 2009, 204, p 56310.1016/j.surfcoat.2009.08.025 ↗
14. C. Zhang, R.Q. Guo, Y. Yang, Y. Wu, and L. Liu, Influence of the Size of Spraying Powders on the Microstructure and Corrosion Resistance of Fe-Based Amorphous Coating, Electrochim. Acta, 2011, 56, p 638010.1016/j.electacta.2011.05.020 ↗
15. Y. Yang, C. Zhang, Y. Peng, Y. Yu, and L. Liu, Effects of Crystallization on the Corrosion Resistance of Fe-Based Amorphous Coatings, Corros. Sci., 2012, 59, p p1010.1016/j.corsci.2012.02.003 ↗
16. X.Q. Liu, Y.G. Zheng, X.C. Chang, W.L. Hou, and J.Q. Wang, Influence of HVOF Thermal Spray Process on the Microstructures and Properties of Fe-Based Amorphous/Nano Metallic Coatings, Mater. Sci. Forum, 2010, 633, p 685
17. M.S. Bakare, K.T. Voisey, K. Chokethawai, and D.G. McCartney, Corrosion Behaviour of Crystalline and Amorphous Forms of the Glass Forming Alloy Fe43Cr16Mo16C15B10, J. Alloy. Compd., 2012, 527, p 21010.1016/j.jallcom.2012.02.127 ↗
18. P.H. Suegama, N. Espallargas, J.M. Guilemany, J. Fernández, and A.V. Benedetti, Electrochemical and Structural Characterization of Heat-Treated Cr3C2-NiCr Coatings, J. Electrochem. Soc., 2006, 153, p 43410.1149/1.2229288 ↗
19. P.H. Suegama, C.S. Fugivara, A.V. Benedetti, J. Fernández, N. Espallargas, J. Delgado, and J.M. Guilemany, Microstructure and Electrochemical Studies of Cr3C2-NiCr Coatings, New Research on Electrochemistry, chap. 4, E.P. Vargus, Ed., Nova Science Publishers, Inc., New York, 2007, p 206
20. S. Hong, Y.P. Wu, J.F. Zhang, Y. Qin, and J. Lin, Effect of Ultrasonic Cavitation Erosion on Corrosion Behavior of High-Velocity Oxygen-Fuel (HVOF) Sprayed Near-Nanostructured WC-10Co-4Cr Coating, Ultrason. Sonochem., 2015, 27, p 37410.1016/j.ultsonch.2015.06.006 ↗
21. Z.B. Zheng, Y.G. Zheng, W.H. Sun, and J.Q. Wang, Effect of Heat Treatment on the Structure, Cavitation Erosion and Erosion–Corrosion Behavior of Fe-Based Amorphous Coatings, Tribol. Int., 2015, 90, p 39310.1016/j.triboint.2015.04.039 ↗
22. V.V. Sobolev and J.M. Guilemany, Investigation of Coating Porosity Formation During High Velocity Oxy-Fuel (HVOF) Spraying, Mater. Lett., 1994, 18, p 30410.1016/0167-577X(94)90012-4 ↗
23. Y.P. Wu, P.H. Lin, Z. Wang, and G. Li, Microstructure and Microhardness Characterization of a Fe-Based Coating Deposited by High-Velocity Oxy-Fuel Thermal Spraying, J. Alloy. Compd., 2009, 481, p 71910.1016/j.jallcom.2009.03.099 ↗
24. J. Farmer, J.S. Choi, C. Saw, J. Haslam, D. Day, P. Hailey, and D. Branagan, Iron-Based Amorphous Metals: High-Performance Corrosion-Resistant Material Development, Metall. Mater. Trans. A, 2009, 40, p 128910.1007/s11661-008-9779-8 ↗
25. M.L. Gualtieri, M. Prudenziati, and A.F. Gualtieri, Quantitative Determination of the Amorphous Phase in Plasma Sprayed Alumina Coatings Using the Rietveld Method, Surf. Coat. Technol., 2006, 201, p 298410.1016/j.surfcoat.2006.06.009 ↗
26. Y. Wang, Z.Z. Xing, Q. Luo, A. Rahman, J. Jiao, S.J. Qu, and J. Shen, Corrosion and Erosion–Corrosion Behaviour of Activated Combustion High-Velocity Air Fuel Sprayed Fe-Based Amorphous Coatings in Chloride-Containing Solutions, Corros. Sci., 2015, 98, p 33910.1016/j.corsci.2015.05.044 ↗
27. Standard, A. S. T. M., G59-97, Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements, ASTM International, West Conshohocken, 2009
28. R.F. Li, Z.G. Li, Y.Y. Zhu, and K. Qi, Structure and Corrosion Resistance Properties of Ni-Fe-B-Si-Nb Amorphous Composite Coatings Fabricated by Laser Processing, J. Alloy. Compd., 2013, 580, p 32710.1016/j.jallcom.2013.06.111 ↗
29. J.M. Guilemany, J. Fernández, N. Espallargas, P.H. Suegama, and A.V. Benedetti, Influence of Spraying Parameters on the Electrochemical Behaviour of HVOF Thermally Sprayed Stainless Steel Coating in 3.4% NaCl, Surf. Coat. Technol., 2006, 200, p 306410.1016/j.surfcoat.2005.02.116 ↗
30. M.M. Verdian, K. Raeissi, and M. Salehi, Fabrication and Corrosion Resistance of HVOF-Sprayed Ni2Si Intermetallic Compound, Appl. Surf. Sci., 2013, 273, p 42610.1016/j.apsusc.2013.02.057 ↗
31. Z. Yao, Z. Jiang, S. Xin, X. Sun, and X. Wu, Electrochemical Impedance Spectroscopy Of Ceramic Coatings on Ti-6Al-4V by Micro-plasma Oxidation, Electrochim. Acta, 2005, 50, p 327310.1016/j.electacta.2004.12.001 ↗
32. D. Toma, W. Brandl, and G. Marginean, Wear and Corrosion Behaviour of Thermally Sprayed Cermet Coatings, Surf. Coat. Technol., 2001, 138, p 14910.1016/S0257-8972(00)01141-5 ↗
33. D. Zhu and W.J. van Ooij, Corrosion Protection of AA 2024-T3 by Bis-[3-(Triethoxysilyl) Propyl] Tetrasulfide in Sodium Chloride Solution: Part 2: Mechanism for Corrosion Protection, Corros. Sci., 2003, 45, p 217710.1016/S0010-938X(03)00061-1 ↗
34. J.G. Yu, J.L. Luo, and P.R. Norton, Electrochemical Investigation of the Effects of Hydrogen on the Stability of the Passive Film on Iron, Electrochim. Acta, 2002, 47, p 152710.1016/S0013-4686(01)00882-9 ↗
35. G. Okamoto and T. Shibata, Stability of Passive Stainless Steel in Relation to the Potential of Passivation Treatment, Corros. Sci., 1970, 10, p 37110.1016/S0010-938X(70)80027-0 ↗