Influence of Solution Heat Treatment on Microstructure and Mechanical Properties of a Hot-Rolled 2205 Duplex Stainless Steel
Source abstract
Abstract
In this present work, the influence of solution heat treatment on microstructure, mechanical and wear properties of a hot-rolled 2205 duplex stainless steel (DSS) was investigated. The DSS samples were subjected to solution heat treatment at different temperature of 1000, 1040, 1080 and 1150 °C, held for 30 min and quenched in water. The microstructure and phase evolution of the as-received and solution heat-treated samples were analyzed using the optical microscope, scanning electron microscope, and x-ray diffraction. Tensile and wear properties were also studied. The result shows that the DSS has characteristic lamellae microstructure consisting of alternating bands of ferrite (δ) and elongated austenite $$(\gamma )$$ with intermetallic precipitates nucleated around the ferrite region. The as-received samples have a higher hardness, tensile strength, yield strength and exhibit a high wear resistance compared to the solution heat-treated samples. The worn surface morphology revealed a mixed-mode of adhesive and abrasive wear mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. J.-O. Nilsson, Super Duplex Stainless Steels, Mater. Sci. Technol., 1992, 8, p 685–700.10.1179/mst.1992.8.8.685 ↗
2. G. Fargas, M. Anglada and A. Mateo, Effect of the Annealing Temperature on the Mechanical Properties, Formability and Corrosion Resistance of Hot-Rolled Duplex Stainless Steel, J. Mater. Process. Technol., 2009, 209, p 1770–1782.10.1016/j.jmatprotec.2008.04.026 ↗
3. M.B. Davanageri, S. Narendranath and R. Kadoli, Influence of Heat Treatment on Microstructure, Hardness and Wear Behavior of Super Duplex Stainless Steel AISI 2507, Am. J. Mater. Sci., 2015, 5, p 48–52.
4. R. Badji, M. Bouabdallah, B. Bacroix, C. Kahloun, B. Belkessa and H. Maza, Phase Transformation and Mechanical Behavior in Annealed 2205 Duplex Stainless Steel Welds, Mater. Charact., 2008, 59, p 447–453.10.1016/j.matchar.2007.03.004 ↗
5. A. Momeni, K. Dehghani and X.X. Zhang, Mechanical and Microstructural Analysis of 2205 Duplex Stainless Steel under Hot Working Condition, J. Mater. Sci., 2012, 47, p 2966–2974.10.1007/s10853-011-6130-3 ↗
6. Y.L. Fang, Z.Y. Liu, H.M. Song and L.Z. Jiang, Hot Deformation Behavior of a New Austenite–Ferrite Duplex Stainless Steel Containing High Content of Nitrogen, Mater. Sci. Eng. A, 2009, 526, p 128–133.10.1016/j.msea.2009.07.012 ↗
7. E. Evangelista, P. Mengucci, J. Bowles and H.J. McQueen, Grain and Subgrain Structures Developed by Hot Working in As-Cast 434 Stainless Steel, High Temp. Mater. Process. (London), 1993, 12, p 57–66.10.1515/HTMP.1993.12.1-2.57 ↗
8. G.S. Reis, A.M. Jorge Jr. and O. Balancin, Influence o the Microstructure of Duplex Stainless Steels on Their Failure Characteristics during Hot Deformation, Mater. Res., 2000, 3, p 31–35.10.1590/S1516-14392000000200006 ↗
9. L. Zhang, Y. Jiang, B. Deng, W. Zhang, J. Xu and J. Li, Effect of Aging on the Corrosion Resistance of 2101 Lean Duplex Stainless Steel, Mater. Charact., 2009, 60, p 1522–1528.10.1016/j.matchar.2009.08.009 ↗
10. G.B. Olson and M. Cohen, A General Mechanism of Martensitic Nucleation: Part I. General Concepts and the FCC → HCP Transformation, Metall. Trans. A, 1976, 7, p 1897–1904.
11. H. Kamali, H. Xie, F. Jia, H. Bi, E. Chang, H. Xu et al., Microstructure and Texture Evolution of Cold-Rolled Low-Ni Cr-Mn-N Austenitic Stainless Steel During Bending, J. Mater. Sci., 2021, 56, p 6465–6486.10.1007/s10853-020-05611-5 ↗
12. G. Fargas, N. Akdut, M. Anglada and A. Mateo, Microstructural Evolution during Industrial Rolling of a Duplex Stainless Steel, ISIJ Int., 2008, 48, p 1596–1602.10.2355/isijinternational.48.1596 ↗
13. J.L. Song and P.S. Bate, Plastic Anisotropy in a Superplastic Duplex Stainless Steel, Acta Mater., 1997, 45, p 2747–2757.10.1016/S1359-6454(96)00396-5 ↗
14. W.B. Hutchinson, K. Ushioda and G. Runnsjö, Anisotropy of Tensile Behaviour in a Duplex Stainless Steel Sheet, Mater. Sci. Technol., 1985, 1, p 728–736.10.1179/mst.1985.1.9.728 ↗
15. H.J. McQueen and J.J. Jonas, Recent Advances in Hot Working: Fundamental Dynamic Softening Mechanisms, J. Appl. Metalwork., 1984, 3, p 233–241.10.1007/BF02833651 ↗
16. B. Ahlblom and R. Sandstrom, Hot Workability of Stainless Steels: Influence of Deformation Parameters, Microstructural Components, and Restoration Processes, Int. Met. Rev., 1982, 27, p 1–27.10.1179/imr.1982.27.1.1 ↗
17. S.K. Ghosh, D. Mahata, R. Roychaudhuri and R. Mondal, Effect of Rolling Deformation and Solution Treatment on Microstructure and Mechanical Properties of a Cast Duplex Stainless Steel, Bull. Mater. Sci., 2012, 35, p 839–846.10.1007/s12034-012-0353-z ↗
18. M. Ou, Y. Ma, X. Hao, B. Wan, T. Liang and K. Liu, Effect of Solution Annealing on Microstructure and Mechanical Properties of a Ni-Cr-W-Fe Alloy, J. Mater. Sci. Technol., 2017, 33, p 1300–1307.10.1016/j.jmst.2016.06.026 ↗
19. Y.H. Yang, B. Yan, J. Wang and J.L. Yin, The Influence of Solution Treatment Temperature on Microstructure and Corrosion Behavior of High Temperature Ageing in 25% Cr Duplex Stainless Steel, J. Alloys Compd., 2011, 509, p 8870–8879.10.1016/j.jallcom.2011.06.099 ↗
20. N. Sathirachinda, R. Pettersson and J. Pan, Depletion Effects at Phase Boundaries in 2205 Duplex Stainless Steel Characterized with SKPFM and TEM/EDS, Corros. Sci., 2009, 51, p 1850–1860.10.1016/j.corsci.2009.05.012 ↗
21. J.-O. Nilsson, P. Kangas, A. Wilson and T. Karlsson, Mechanical Properties, Microstructural Stability and Kinetics of σ-Phase Formation in 29Cr-6Ni-2Mo-038 N Superduplex Stainless Steel, Metall. Mater. Trans. A, 2000, 31, p 35–45.10.1007/s11661-000-0050-1 ↗
22. J.Y. Choi, J.H. Ji, S.W. Hwang and K.-T. Park, Strain Induced Martensitic Transformation of Fe-20Cr-5Mn-02 Ni Duplex Stainless Steel During Cold Rolling: Effects of Nitrogen Addition, Mater. Sci. Eng. A, 2011, 528, p 6012–6019.10.1016/j.msea.2011.04.038 ↗
23. I. Tamura, Deformation-Induced Martensitic Transformation and Transformation-Induced Plasticity in Steels, Metal Sci., 1982, 16, p 245–253.10.1179/030634582790427316 ↗
24. M.J. Sohrabi, M. Naghizadeh and H. Mirzadeh, Deformation-Induced Martensite in Austenitic Stainless Steels: A Review, Arch. Civil Mech. Eng., 2020, 20, p 1–24.10.1007/s43452-019-0008-6 ↗
25. M. Soleimani, A. Kalhor, and H. Mirzadeh, Transformation-Induced Plasticity (TRIP) in Advanced Steels: A Review. Mater. Sci. Eng. A, 2020, 140023.10.1016/j.msea.2020.140023 ↗
26. T.-Y. Liu, P. Yang, L. Meng and F.-Y. Lu, Influence of Austenitic Orientation on Martensitic Transformations in a Compressed High Manganese Steel, J. Alloys Compd., 2011, 509, p 8337–8344.10.1016/j.jallcom.2011.05.015 ↗
27. P. Yang, T. Liu, F. Lu and L. Meng, Orientation Dependence of Martensitic Transformation in high Mn TRIP/TWIP Steels, Steel Res. Int., 2012, 83, p 368–373.10.1002/srin.201100307 ↗
28. H. Kamali, H. Xie, H. Bi, E. Chang, H. Xu, H. Yu et al., Deformation Mechanism and Texture Evolution of a low-Ni Cr-Mn-N Austenitic Stainless Steel under Bending Deformation, Mater. Sci. Eng. A, 2021, 804, p 140724.10.1016/j.msea.2020.140724 ↗
29. Y. Yang, B. Yan, J. Li and J. Wang, The Effect of Large Heat Input on the Microstructure and Corrosion Behaviour of Simulated Heat Affected Zone in 2205 Duplex Stainless Steel, Corros. Sci., 2011, 53, p 3756–3763.10.1016/j.corsci.2011.07.022 ↗
30. G. Fargas, N. Akdut, M. Anglada, and A. Mateo, Ph. D. Thesis, Universiteit Gent Ph. D. Thesis, Universiteit Gent, 2003. ISIJ International, 2008;48:1596–602.10.2355/isijinternational.48.1596 ↗
31. J. Zhang, X. Hu, P. Lin and K. Chou, Effect of Solution Annealing on the Microstructure Evolution and Corrosion Behavior of 2205 Duplex Stainless Steel, Mater. Corros., 2019, 70, p 676–687.10.1002/maco.201810536 ↗
32. M.B. Mampuya, M.C. Umba, K. Mutombo, and P.A. Olubambi, Effect of Heat Treatment on the Microstructure of Duplex Stainless Steel 2205. Mater. Today Proc., 2020.10.1016/j.matpr.2020.06.196 ↗
33. R. Badji, B. Bacroix and M. Bouabdallah, Texture, Microstructure and Anisotropic Properties in Annealed 2205 Duplex Stainless Steel Welds, Mater. Charact., 2011, 62, p 833–843.10.1016/j.matchar.2011.06.001 ↗
34. T.H. Chen and J.R. Yang, Effects of Solution Treatment and Continuous Cooling on σ-Phase Precipitation in a 2205 Duplex Stainless Steel, Mater. Sci. Eng. A, 2001, 311, p 28–41.10.1016/S0921-5093(01)00911-X ↗
35. S.E. Offerman, N.H. Van Dijk, J. Sietsma, S. Grigull, E.M. Lauridsen, L. Margulies et al., Grain Nucleation and Growth During Phase Transformations, Science, 2002, 298, p 1003–1005.10.1126/science.1076681 ↗
36. Y. Guo, J. Hu, J. Li, L. Jiang, T. Liu and Y. Wu, Effect of Annealing Temperature on the Mechanical and Corrosion Behavior of a Newly Developed Novel Lean Duplex Stainless Steel, Materials, 2014, 7, p 6604–6619.10.3390/ma7096604 ↗
37. L. Duprez, B. De Cooman and N. Akdut, Microstructure Evolution during Isothermal Annealing of a Standard Duplex Stainless Steel Type 1.4462, Steel Res., 2000, 71, p 417–422.10.1002/srin.200001338 ↗
38. Q. Meng, P. La, L. Yao, P. Zhang, Y. Wei, and X. Guo, Effect of Al on Microstructure and Properties of Hot-Rolled 2205 Dual Stainless Steel. Adv. Mater. Sci. Eng., 2016, 2016.10.1155/2016/7518067 ↗
39. M.R. Mphahlele, S.R. Oke, O.O. Ige, O.E. Falodun, and P.A. Olubambi, Effect of TiN Nanoparticles on the Friction and Wear Properties of Spark Plasma Sintered Fe-Cr-Ni. Tribol. Ind., 2019, 41.10.24874/ti.2019.41.02.01 ↗
40. T.S.N.S. Narayanan, J. Kim and H.W. Park, High Performance Corrosion and Wear Resistant Ti-6Al-4V Alloy by the Hybrid Treatment Method, Appl. Surf. Sci., 2020, 504, p 144388.10.1016/j.apsusc.2019.144388 ↗
41. M. Fellah, N. Hezil, M.A. Samad, R. Djellabi, A. Montagne, A. Mejias et al., Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications, J. Mater. Eng. Perform., 2019, 28, p 5988–5999.10.1007/s11665-019-04348-w ↗