journal article·2020-05

Influence of Cu Addition on the Microstructure, Mechanical, and Corrosion Properties of Extruded Mg-2%Zn Alloy

M. Lotfpour, M. Emamy, C. Dehghanian

Publisher page

Abstract

Effects of different Cu concentrations on the microstructure, mechanical, and corrosion properties of the extruded Mg-2%Zn alloy were studied by the use of x-ray diffraction, optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy, tensile testing, polarization, and electrochemical impedance spectroscopy (EIS) measurements. The hot-extruded Mg-2%Zn comprised an equiaxed grain structure with the average size of about 13 μm. By adding 5 wt.% Cu, the average grain size decreased to 4 μm, due to the grain refinement behavior of Cu addition. Microstructural observations confirmed the existence of the α-Mg matrix, Mg(Zn,Cu), and Mg(Zn,Cu)2 intermetallics. The results obtained from mechanical testing revealed that Cu addition along with applying hot extrusion increased the hardness significantly from 80 HBN, for Cu-free alloy, to 108 HBN for the extruded Mg-2%Zn-5%Cu alloy. By the addition of 0.5 wt.% Cu, the values of ultimate tensile strength (UTS), elongation, and ultimate compressive strength (UCS) changed from about 233 MPa, 16.8%, and 294 MPa to 260 MPa, 21.5%, and 335 MPa, respectively, as optimum levels. However, more Cu addition (i.e., 5 wt.%) decreased UTS, elongation, and UCS values to 242 MPa, 15.9%, and 272 MPa, respectively, by introducing a high volume fraction of the second phase. On the other hand, tensile yield strength and compressive yield strength increased gradually at higher Cu additions from 128 to 105 MPa in the case of the Cu-free extruded alloy to 165 and 156 MPa for the alloy containing 5 wt.% Cu, respectively. The polarization and EIS results indicated that the extrusion process eliminates the protective film from the Mg-2%Zn alloy surface. The Mg-2%Zn alloy exhibited the best anti-corrosion property among the studied alloys, as further Cu addition increased the intermetallic volume fractions and enhanced the corrosion rate, due to the galvanic couple effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. W. Xu, N. Birbilis, G. Sha, Y. Wang, J.E. Daniels, Y. Xiao, and M. Ferry, A High-Specific-Strength and Corrosion-Resistant Magnesium Alloy, Nat. Mater., 2015, 14, p 1229–123510.1038/nmat4435 ↗
2. S. Cai, T. Lei, N. Li, and F. Feng, Effects of Zn on Microstructure, Mechanical Properties and Corrosion Behavior of Mg-Zn Alloys, Mater. Sci. Eng. C, 2012, 32, p 2570–257710.1016/j.msec.2012.07.042 ↗
3. S. Zhang, X. Zhang, C. Zhao, J. Li, Y. Song, C. Xie, H. Tao, Y. Zhang, Y. He, Y. Jiang, and Y. Bian, Research on an Mg-Zn Alloy as a Degradable Biomaterial, Acta Biomater., 2010, 6, p 626–64010.1016/j.actbio.2009.06.028 ↗
4. Y. Song, E.H. Han, D. Shan, C.D. Yim, and B.S. You, The Effect of Zn Concentration on the Corrosion Behavior of Mg-x%Zn Alloys, Corros. Sci., 2012, 65, p 322–33010.1016/j.corsci.2012.08.037 ↗
5. C.J. Boehlert and K. Knittel, The Microstructure, Tensile Properties, and Creep Behavior of Mg-Zn Alloys Containing 0-4.4 wt.% Zn, Mater. Sci. Eng. A, 2006, 417, p 315–32110.1016/j.msea.2005.11.006 ↗
6. A. Srinivasan, Y. Huang, C.L. Mendis, C. Blawert, K.U. Kainer, and N. Hort, Investigations on Microstructures, Mechanical and Corrosion Properties of Mg-Gd-Zn alloys, Mater. Sci. Eng. A, 2014, 595, p 224–23410.1016/j.msea.2013.12.016 ↗
7. Y. Song, E.H. Han, D. Shan, C.D. Yim, and B.S. You, The Role of Second Phases in the Corrosion Behavior of Mg-5Zn Alloy, Corros. Sci., 2012, 60, p 238–24510.1016/j.corsci.2012.03.030 ↗
8. Y. Lu, R. Bradshaw, Y.L. Chiu, and I.P. Jones, The Role of Precipitates in the Bio-corrosion Performance of Mg-3Zn in Simulated body Fluid, J. Alloys. Compd., 2014, 614, p 345–35210.1016/j.jallcom.2014.06.078 ↗
9. Y. Yan, H. Cao, Y. Kang, K. Yu, T. Xiao, J. Luo, Y. Deng, H. Fang, H. Xiong, and Y. Dai, Effects of Zn Concentration and Heat Treatment on the Microstructure, Mechanical Properties and Corrosion Behavior of As-Extruded Mg-Zn Alloys Produced by Powder Metallurgy, J. Alloys Compd., 2017, 693, p 1277–128910.1016/j.jallcom.2016.10.017 ↗
10. L. Liu, X. Chen, F. Pan, Z. Wang, W. Liu, P. Cao, T. Yan, and X. Xu, Effect of Y and Ce Additions on Microstructure and Mechanical Properties of Mg-Zn-Zr Alloys, Mater. Sci. Eng. A, 2015, 644, p 247–25310.1016/j.msea.2015.07.065 ↗
11. Y. Du, M. Zheng, X. Qiao, D. Wang, W. Peng, K. Wu, and B. Jiang, Improving Microstructure and Mechanical Properties in Mg-6 mass% Zn Alloys by Combined Addition of Ca and Ce, Mater. Sci. Eng. A, 2016, 656, p 67–7410.1016/j.msea.2016.01.034 ↗
12. T. Bhattacharjee, T. Nakata, T.T. Sasaki, S. Kamado, and K. Hono, Effect of Microalloyed Zr on the Extruded Microstructure of Mg-6.2Zn-Based Alloys, Scr. Mater., 2014, 90-91, p 37–4010.1016/j.scriptamat.2014.07.011 ↗
13. M. Lotfpour, M. Emamy, C. Dehghanian, and K. Tavighi, Influence of Cu Addition on the Structure, Mechanical and Corrosion Properties of Cast Mg-2%Zn Alloy, J. Mater. Eng. Perform., 2017, 26, p 2136–215010.1007/s11665-017-2672-0 ↗
14. S. Zhu, T. Luo, T. Zhang, Y. Li, and Y. Yang, Effects of Cu Addition on the Microstructure and Mechanical Properties of As-Cast and Heat Treated Mg-6%Zn-4%Al Magnesium Alloy, Mater. Sci. Eng. A, 2017, 689, p 203–21110.1016/j.msea.2017.02.061 ↗
15. C. Dehghanian, M. Lotfpour, and M. Emamy, The Microstructure, and Mechanical and Corrosion Properties of As-Cast and As-Extruded Mg-2%Zn-x%Cu Alloys After Solution and Aging Heat Treatments, J. Mater. Eng. Perform., 2019, 28, p 2305–231510.1007/s11665-019-03978-4 ↗
16. H.M. Zhu, C.P. Luo, J.W. Liu, and D.L. Jiao, Growth Twinning Behavior of Cast Mg-Zn-Cu-Zr Alloys, Trans. Nonferrous Met. Soc., 2014, 24, p 316–32010.1016/S1003-6326(14)63063-6 ↗
17. J. Buha and T. Ohkubo, Natural Aging in Mg-Zn (-Cu) Alloys, Metall. Mater. Trans. A, 2008, 39, p 225910.1007/s11661-008-9545-y ↗
18. H.M. Zhu, G. Sha, J.W. Liu, C.L. Wu, C.P. Luo, Z.W. Liu, R.K. Zheng, and S.P. Ringer, Microstructure and Mechanical Properties of Mg-6Zn-xCu-0.6Zr (wt%) Alloys, J. Alloys Compd., 2011, 509, p 3526–353110.1016/j.jallcom.2010.12.165 ↗
19. H.M. Zhu, C.P. Luo, J.W. Liu, and D.L. Jiao, Effects of Cu Addition on Microstructure and Mechanical Properties of As-Cast Magnesium Alloy ZK60, Trans. Nonferrous Met. Soc., 2014, 24, p 605–61010.1016/S1003-6326(14)63101-0 ↗
20. X. Chen, L. Liu, F. Pan, J. Mao, X. Xu, and T. Yan, Microstructure, Electromagnetic Shielding Effectiveness and Mechanical Properties of Mg-Zn-Cu-Zr Alloys, Mater. Sci. Eng. B, 2015, 197, p 67–7410.1016/j.mseb.2015.03.012 ↗
21. S. Golmakaniyoon and R. Mahmudi, Comparison of the Effects of La- and Ce-Rich Rare Earth Additions on the Microstructure, Creep Resistance, and High-Temperature Mechanical Properties of Mg-6Zn-3Cu Cast Alloy, Mater. Sci. Eng. A, 2011, 528, p 5228–523310.1016/j.msea.2011.03.083 ↗
22. J.H. Jun, J.M. Kim, B.K. Park, K.T. Kim, and W.J. Jung, Effects of Rare Earth Elements on Microstructure and High Temperature Mechanical Properties of ZC63 Alloy, J. Mater. Sci., 2005, 40, p 2659–266110.1007/s10853-005-2099-0 ↗
23. E.A. Ball and P.B. Prangnell, Tensile-Compressive Yield Asymmetries in High Strength Wrought Magnesium Alloys, Scr. Mater., 1994, 31, p 111–11610.1016/0956-716X(94)90159-7 ↗
24. F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon Press, Oxford, 2004, p 285–31910.1016/B978-008044164-1/50013-X ↗
25. C.J. Wang, K.K. Deng, K.B. Nie, S.J. Shang, and W. Liang, Competition Behavior of the Strengthening Effects in As-Extruded AZ91 Matrix: Influence of Pre-existed Mg17Al12 Phase, Mater. Sci. Eng. A, 2016, 656, p 102–11010.1016/j.msea.2016.01.023 ↗
26. C.A. Nijnez-lopez, P. Skeldon, G.E. Thompson, P. Lyon, H. Karimzadeh, and T.E. Wilks, The Corrosion Behaviour of Mg Alloy ZC71/SiCp Metal Matrix Composite, Corros. Sci., 1995, 37, p 689–70810.1016/0010-938X(95)80003-4 ↗
27. R. Xu, M.C. Zhao, Y.C. Zhao, L. Liu, C. Liu, C. Gao, C. Shuai, and A. Atrens, Improved Biodegradation Resistance by Grain Refinement of Novel Antibacterial ZK30-Cu Alloys Produced via Selective Laser Melting, Mater. Lett., 2019, 237, p 253–25710.1016/j.matlet.2018.11.071 ↗
28. S.-M. Baek, B. Kim, and S.S. Park, Influence of Intermetallic Particles on the Corrosion Properties of Extruded ZK60 Mg Alloy Containing Cu, Metals, 2018, 8, p 32310.3390/met8050323 ↗
29. C. Shuaia, L. Liu, M. Zhao, P. Feng, Y. Yang, W. Guo, C. Gao, and F. Yuan, Microstructure, Biodegradation, Antibacterial and Mechanical Properties of ZK60-Cu Alloys Prepared by Selective Laser Melting Technique, J. Mater. Sci. Technol., 2018, 34(10), p 1944–195210.1016/j.jmst.2018.02.006 ↗
30. C. Liu, X. Fu, H. Pan, P. Wan, L. Wang, L. Tan, K. Wang, Y. Zhao, K. Yang, and P.K. Chu, Biodegradable Mg-Cu Alloys with Enhanced Osteogenesis, Angiogenesis, and Long-Lasting Antibacterial Effects, Sci. Rep., 2016, 6, p 2737410.1038/srep27374 ↗
31. X. Yan, P. Wan, L. Tan, M. Zhao, L. Qin, and K. Yang, Corrosion and Biological Performance of Biodegradable Magnesium Alloys Mediated by Low Copper Addition and Processing, Mater. Sci. Eng. A, 2018, 93, p 565–58110.1016/j.msec.2018.08.013 ↗
32. X. Yan, P. Wan, L. Tan, M. Zhao, C. Shuai, and K. Yang, Influence of Hybrid Extrusion and Solution Treatment on the Microstructure and Degradation Behavior of Mg-0.1Cu Alloy, Mater. Sci. Eng. A, 2018, 229, p 105–11710.1016/j.mseb.2017.12.033 ↗
33. J.D. Robson, D.T. Henry, and B. Davis, Particle Effects on Recrystallization in Magnesium-Manganese Alloys: Particle-Stimulated Nucleation, Acta Mater., 2009, 57, p 2739–274710.1016/j.actamat.2009.02.032 ↗
34. H. Okamoto, Comment on Mg-Zn (Magnesium-Zinc), Phase Equilib. Diffus., 1994, 15, p 129–13010.1007/BF02667700 ↗
35. W. Chen and J. Sun, The Electronic Structure and Mechanical Properties of MgCu2 Laves Phase Compound, Physica B, 2006, 382, p 279–28410.1016/j.physb.2006.02.031 ↗
36. B. Kim, S.M. Baek, H.Y. Jeong, J.G. Lee, and S.S. Park, Grain refinement and Reduced Yield Asymmetry of Extruded Mg-5Sn-1Zn Alloy by Al Addition, J. Alloys Compd., 2016, 660, p 304–30910.1016/j.jallcom.2015.11.133 ↗
37. N.J. Petch, The Cleavage Strength of Polycrystals, J. Iron Steel Inst., 1953, 174, p 25
38. E.O. Hall, The Deformation and Ageing of Mild Steel: II, Characteristics of the Lüders Deformation, Proc. Phys. Soc. B., 1951, 64, p 74710.1088/0370-1301/64/9/303 ↗
39. G. Mima and Y. Tanaka, Grain Size Dependence of Yield Stress and Flow Stress in the Age-Hardened Magnesium-Zinc Alloy, Trans JIM, 1971, 12, p 31710.2320/matertrans1960.12.317 ↗
40. M.R. Barnett, Z. Keshavarz, A.G. Beer, and D. Atwell, Influence of Grain Size on the Compressive Deformation of Wrought Mg-3Al-1Zn, Acta Mater., 2004, 52, p 5093–510310.1016/j.actamat.2004.07.015 ↗
41. Y. Jiang, Y. Chen, and G. Gao, Role of Volume Fraction of Second Phase Particles, Dislocation-Twin and Twin–Twin Interactions in the Reduced Tension-Compression Yield Asymmetry, Mater. Des., 2016, 97, p 131–13710.1016/j.matdes.2016.02.079 ↗
42. S.M. Yin, C.H. Wang, Y.D. Diao, S.D. Wu, and S.X. Li, Influence of Grain Size and Texture on the Yield Asymmetry of Mg-3Al-1Zn Alloy, J. Mater. Sci. Technol., 2011, 27, p 29–3410.1016/S1005-0302(11)60021-2 ↗
43. J. Jain, W.J. Poole, C.W. Sinclair, and M.A. Gharghouri, Reducing the Tension-Compression Yield Asymmetry in a Mg-8Al-0.5Zn Alloy via Precipitation, Scr. Mater., 2010, 62, p 301–30410.1016/j.scriptamat.2009.11.024 ↗
44. M. Ben-Haroush, G. Ben-Hamu, D. Eliezer, and L. Wagner, The Relation Between Microstructure and Corrosion Behavior of AZ80 Mg Alloy Following Different Extrusion Temperatures, Corros. Sci., 2008, 50, p 1766–177810.1016/j.corsci.2008.03.003 ↗
45. G.L. Song and Z.Q. Xu, The Surface, Microstructure and Corrosion of Magnesium Alloy AZ31 Sheet, Electrochim. Acta, 2010, 55, p 4148–416110.1016/j.electacta.2010.02.068 ↗
46. T. Zhang, Y. Shao, G. Meng, Z. Cui, and F. Wang, Corrosion of Hot Extrusion AZ91 Magnesium Alloy: I-Relation Between the Microstructure and Corrosion Behavior, Corros. Sci., 2011, 53, p 1960–196810.1016/j.corsci.2011.02.015 ↗
47. N.N. Aung and W. Zhou, Effect of Grain Size and Twins on Corrosion Behaviour of AZ31B Magnesium Alloy, Corros. Sci., 2010, 52, p 589–59410.1016/j.corsci.2009.10.018 ↗