journal article·2015-02

Effect of Silica Ratio on the Corrosion Behavior of Nano-silica Potassium Silicate Coatings on Aluminum Alloy 2024

H. Bahri, I. Danaee, G. R. Rashed, D. Zaarei

Publisher page

Abstract

Nano-silica modified potassium silicate conversion coating was deposited in different nano-silica/potassium silicate ratios on the surface of 2024 aluminum alloy. The corrosion behavior of coatings was studied by electrochemical impedance spectroscopy, current transient, potentiodynamic polarization, and surface techniques. The ratio of nano-silica/potassium silicate was optimized in order to obtain higher corrosion protection. The experimental results indicated that with increasing nano-silica/potassium silicate ratio, the corrosion resistance of aluminum increases. Furthermore, the pitting corrosion probability of potassium silicate conversion coating decreased with increasing silica ratio. This can be related to the size of nano-silica particles and the ability to fill the pores in potassium silicate coating and reinforce the created siloxane bridges.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Z. Wang, Z. Jiang, H. Hu, and X. Nie, Determination and Relaxation of Residual Stress in 2024 Al-30 vol.% Magnesium Borate Whisker Composites, J. Mater. Eng. Perform., 2013, 22, p 3126–313310.1007/s11665-013-0599-7 ↗
2. Z. Ahmad and B.J. Abdul Aleem, The Effect of Inhibitors on the Susceptibility of Al 6013/SiC Interface to Localized Corrosion, J. Mater. Eng. Perform., 2009, 18, p 129–13610.1007/s11665-008-9243-3 ↗
3. E. Darmiani, I. Danaee, M.A. Golozar, M.R. Toroghinejad, A. Ashrafi, and A. Ahmadi, Reciprocating Wear Resistance of Al-SiC Nano-composite Fabricated by Accumulative Roll Bonding Process, Mater. Des., 2013, 50, p 497–50210.1016/j.matdes.2013.03.047 ↗
4. C. Vidal and V. Infante, Optimization of FS Welding Parameters for Improving Mechanical Behavior of AA2024-T351 Joints Based on Taguchi Method, J. Mater. Eng. Perform., 2013, 22, p 2261–227010.1007/s11665-013-0499-x ↗
5. H. Abd El-Hafez, Mechanical Properties and Welding Power of Friction Stirred AA2024-T35 Joints, J. Mater. Eng. Perform., 2011, 20, p 839–84510.1007/s11665-010-9709-y ↗
6. C. Maldonado, D. Diaz, J. Ranallo, R. Painter, W. Dahir, D. Hassouna, B. Gayer, E. Toss, I. Martinez, P. Stoyanov, J. Ogren, E.W. Lee, D. Piatkowski, J. Hilty, and O.S. Es-Said, Coating Cure Temperatures on the Mechanical Properties of Aluminum Alloy Substrates, J. Mater. Eng. Perform., 2009, 18, p 70–7810.1007/s11665-008-9256-y ↗
7. R.M. Pidaparti and B.S. Aghazadeh, Degradation Modeling of 2024 Aluminum Alloy During Corrosion Process, J. Mater. Eng. Perform., 2011, 20, p 348–35410.1007/s11665-010-9707-0 ↗
8. X. Li, B. Xiang, X. Zuo, Q. Wang, and Z. Wei, Inhibition of Tryptophan on AA 2024 in Chloride-Containing Solutions, J. Mater. Eng. Perform., 2011, 20, p 265–27010.1007/s11665-010-9680-7 ↗
9. C.A. Rodopoulos, A.Th. Kermanidis, E. Statnikov, V. Vityazev, and O. Korolkov, The Effect of Surface Engineering Treatments on the Fatigue Behavior of 2024-T351 Aluminum Alloy, J. Mater. Eng. Perform., 2007, 16, p 30–3410.1007/s11665-006-9004-0 ↗
10. E. Zasimchuk, L. Markashova, O. Baskova, T. Turchak, N. Chausov, V. Hutsaylyuk, and V. Berezin, Influence of Combined Loading on Microstructure and Properties of Aluminum Alloy 2024-T3, J. Mater. Eng. Perform., 2013, 22, p 3421–342910.1007/s11665-013-0630-z ↗
11. E. Darmiani, I. Danaee, M.A. Golozar, and M.R. Toroghinejad, Corrosion Investigation of Al-SiC Nano-composite Fabricated by Accumulative Roll Bonding (ARB) Process, J. Alloys Compd., 2013, 552, p 31–3910.1016/j.jallcom.2012.10.069 ↗
12. A. Conde, M. Arenas, A. De Frutos, and J. De Damborenea, Effective Corrosion Protection of 8090 Alloy by Cerium Conversion Coatings, Electrochim. Acta, 2008, 53, p 7760–776810.1016/j.electacta.2008.05.039 ↗
13. C. Blanc, B. Lavelle, and G. Mankowski, The Role of Precipitates Enriched with Copper on the Susceptibility to Pitting Corrosion of the 2024 Aluminum Alloy, Corros. Sci., 1997, 39, p 495–51010.1016/S0010-938X(97)86099-4 ↗
14. W.G. Fahrenholtz, M.J. O’Keefe, H. Zhou, and J.T. Grant, Characterization of Cerium-Based Conversion Coatings for Corrosion Protection of Aluminum Alloys, Surf. Coat. Technol., 2002, 155, p 208–21310.1016/S0257-8972(02)00062-2 ↗
15. M. Castro, J.C. Nogueira, G.P. Thim, and M. Oliveira, Adhesion and Corrosion Studies of a Lithium Based Conversion Coating Film on the 2024 Aluminum Alloy, Thin Solid Films, 2004, 457, p 307–31210.1016/j.tsf.2003.10.024 ↗
16. S.C. Tjong and H.W. Huo, Corrosion Protection of In Situ Al-Based Composite by Cerium Conversion Treatment, J. Mater. Eng. Perform., 2009, 18, p 88–9410.1007/s11665-008-9264-y ↗
17. R.L. Twite and G.P. Bierwagen, Review of Alternatives to Chromate for Corrosion Protection of Aluminum Aerospace Alloys, Prog. Org. Coat., 1998, 33, p 91–10010.1016/S0300-9440(98)00015-0 ↗
18. X. Yu and C. Cao, Electrochemical Study of the Corrosion Behavior of Ce Sealing of Anodized 2024 Aluminum Alloy, Thin Solid Films, 2003, 423, p 252–25610.1016/S0040-6090(02)01038-6 ↗
19. F.W. Lytle, R.B. Greegor, G.L. Blohowiak, K.Y. Smith, and G.D. Tuss, An Investigation of the Structure and Chemistry of a Chromium-Conversion Surface Layer on Aluminum, Corros. Sci., 1995, 37, p 349–36910.1016/0010-938X(94)00101-B ↗
20. K. Saeki, M. Kadono, and A. Nabeshima, Removal of Aqueous Chromate [Cr(VI)] Through Photocatalysis by Using TiO2-Coated Silica Granules, J. Environ. Sci. Health A, 2010, 45, p 275–28110.1080/10934520903467915 ↗
21. B.F. Rivera, B.Y. Johnson, M.J. O’Keefe, and W.G. Fahrenholtz, Deposition and Characterization of Cerium Oxide Conversion Coatings on Aluminum Alloy 7075-T6, Surf. Coat. Technol., 2004, 176, p 349–35610.1016/S0257-8972(03)00742-4 ↗
22. A. Seth and W.J. van Ooij, Novel, Water-Based High-Performance Primers that can Replace Metal Pretreatments and Chromate-Containing Primers, J. Mater. Eng. Perform., 2004, 13, p 468–47410.1361/1059949042007 ↗
23. J. Min, J.H. Park, H.K. Sohn, and J.M. Park, Synergistic Effect of Potassium Metal Siliconate on Silicate Conversion Coating for Corrosion Protection of Galvanized Steel, J. Ind. Eng. Chem., 2012, 18, p 655–66010.1016/j.jiec.2011.11.057 ↗
24. A.S. Hamdy and D.P. Butt, Environmentally Compliant Silica Conversion Coatings Prepared by Sol-Gel Method for Aluminum Alloys, Surf. Coat. Technol., 2006, 201, p 401–40710.1016/j.surfcoat.2005.11.142 ↗
25. M.R. Yuan, J.T. Lu, G. Kong, and C.S. Che, Effect of Silicate Anion Distribution in Sodium Silicate Solution on Silicate Conversion Coatings of Hot-Dip Galvanized Steels, Surf. Coat. Technol., 2011, 205, p 4466–447010.1016/j.surfcoat.2011.03.064 ↗
26. M.R. Yuan, J.T. Lu, G. Kong, and C.S. Che, Self-Healing Ability of Silicate Conversion Coatings on Hot Dip Galvanized Steels, Surf. Coat. Technol., 2011, 205, p 4507–451310.1016/j.surfcoat.2011.03.088 ↗
27. H. Bahri, I. Danaee, and G.R. Rashed, The Effect of Curing Time and Curing Temperature on the Corrosion Behavior of Nanosilica Modified Potassium Silicate Coatings on AA2024, Surf. Coat. Technol., 2014, 254, p 305–31210.1016/j.surfcoat.2014.06.041 ↗
28. A.G. Kannan, N.R. Choudhury, and N.K. Dutta, Electrochemical Performance of Sol-Gel Derived Phospho-silicate-methacrylate Hybrid Coatings, J. Electroanal. Chem., 2010, 641, p 28–3410.1016/j.jelechem.2010.01.016 ↗
29. R. Gout, G.S. Pokrovski, J. Schott, and A. Zwick, Raman Spectroscopic Study of Aluminum Silicate Complexes at 20 °C in Basic, J. Solut. Chem., 2000, 29, p 1173–118610.1023/A:1026428027101 ↗
30. K. Aramaki, Preparation of Chromate-Free, Self-Healing Polymer Films Containing Sodium Silicate on Zinc Pretreated in a Cerium (III) Nitrate Solution for Preventing Zinc Corrosion at Scratches in 0.5 M NaCl, Corros. Sci., 2002, 44, p 1375–138910.1016/S0010-938X(01)00138-X ↗
31. K. Aramaki, Self-Healing Mechanism of an Organosiloxane Polymer Film Containing Sodium Silicate and Cerium (III) Nitrate for Corrosion of Scratched Zinc Surface in 0.5 M NaCl, Corros. Sci., 2002, 44, p 1621–163210.1016/S0010-938X(01)00171-8 ↗
32. L.T. Zhuravlev, The Surface Chemistry of Amorphous Silica. Zhuravlev Model, Colloid. Surf. A, 2000, 173, p 1–3810.1016/S0927-7757(00)00556-2 ↗
33. U.S. Bureau of Mines, Crystalline Silica Primer, U.S. Dept. of the Interior, Washington, DC, 1992
34. M. Yuan, J. Lu, and G. Kong, Effect of SiO2:Na2O Molar Ratio of Sodium Silicate on the Corrosion Resistance of Silicate Conversion Coatings, Surf. Coat. Technol., 2010, 204, p 1229–123510.1016/j.surfcoat.2009.10.024 ↗
35. I. Danaee, Kinetics and Mechanism of Palladium Electrodeposition on Graphite Electrode by Impedance and Noise Measurements, J. Electroanal. Chem., 2011, 662, p 415–42010.1016/j.jelechem.2011.09.012 ↗
36. J.R. Macdonald, Note on the Parameterization of the Constant-Phase Admittance Element, Solid State Ion., 1984, 13, p 147–14910.1016/0167-2738(84)90049-3 ↗
37. O. Ghasemi, I. Danaee, G.R. Rashed, M. RashvandAvei, and M.H. Maddahy, The Inhibition Effect of Synthesized 4-Hydroxybenzaldehyde-1,3propandiamine on the Corrosion of Mild Steel in 1 M HCl, J. Mater. Eng. Perform., 2013, 22, p 247–25910.1007/s11665-012-0348-3 ↗
38. G. Meng, L. Wei, T. Zhang, Y. Shao, F. Wang, C. Dong, and X. Li, Effect of Microcrystallization on Pitting Corrosion of Pure Aluminium, Corros. Sci., 2009, 51, p 2151–215710.1016/j.corsci.2009.05.046 ↗
39. R. Arrabal, B. Mingo, A. Pardo, M. Mohedano, E. Matykina, and I. Rodriguez, Pitting Corrosion of Rheocast A356 Aluminium Alloy in 3.5 wt% NaCl Solution, Corros. Sci., 2013, 73, p 342–35510.1016/j.corsci.2013.04.023 ↗
40. K.J. Klabunde, Nanoscale Materials in Chemistry, Wiley-Interscience, New York, 200110.1002/0471220620 ↗
41. V. Padavettan and I. Ab Rahman, Synthesis of Silica Nanoparticles by Sol-Gel: Size-Dependent Properties, Surface Modifications, and Applications in Silica-Polymer Nanocomposites, J. Nanomater., 2012, 2012, p 1–15
42. S. Dalbin, G. Maurin, R.P. Nogueira, J. Persello, and N. Pommier, Silica-Based Coating for Corrosion Protection of Electrogalvanized Steel, Surf. Coat. Technol., 2005, 194, p 363–37110.1016/j.surfcoat.2004.07.126 ↗
43. C.B. Dallam, Colloidal Silica Binder System, United States of America Patent 20050121110A1, 9 Jun 2005
44. ASME UCRL-PROC-209551, Stifling of Crevice Corrosion in Alloy 22 During Constant Potential Tests, ASME, 2005
45. ASME UCRL-PROC-202921, Determination of the Crevice Repassivation Potential of Alloy 22 by a Potentiodynamic-Galvanostatic-Potentiostatic Method, ASME, 2004
46. I. Danaee and S. Noori, Kinetics of the Hydrogen Evolution Reaction on NiMn Graphite Modified Electrode, Int. J. Hydrogen Energy, 2011, 36, p 12102–1211110.1016/j.ijhydene.2011.06.106 ↗
47. I. Danaee, M. NiknejadKhomami, and A.A. Attar, Corrosion Behavior of AISI, 4130 Steel Alloy in Ethylene Glycol-Water Mixture in Presence of Molybdate, Mater. Chem. Phys., 2012, 135, p 658–66710.1016/j.matchemphys.2012.05.041 ↗
48. ASTM B-117, Standard Practice for Operating Salt Spray (Fog) Apparatus, Annual Book of ASTM Standards, 2011