Simulation of Static Recrystallization After Cold Side-Pressing of Low Carbon Steels Using Cellular Automata
Source abstract
Abstract
In this article, the finite element and cellular automata models are coupled to determine static recrystallization kinetics after cold deformation of low carbon steels. The deformation analysis is first performed to predict the strain, stress, and stored energy distributions within the deformed steel employing the finite element software, ABAQUS. Then, the kinetics of static recrystallization and distribution of recrystallized grain size are evaluated by means of a cellular automata model together with the stored energy calculated by the deformation analysis. To examine the predictions, the experimental results of recrystallized fractions and grain sizes after cold side-pressing of low carbon steel are compared with the predicted ones, and a reasonable agreement is achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena, Elsevier Science, Oxford, 2006
2. D. Hull and D.J. Bacon, Introduction to Dislocations, 3rd ed., Pergamon Press, Oxford, 1984
3. D. Raabe, F. Roters, F. Barlat, and L.Q. Chen, Ed., Continuum Scale Simulation of Engineering Materials, Willey-VCH, Weinheim, 1998
4. G.F. Janssens, D. Raabe, E. Kozeschnik, M.A. Miodownik, and B. Nestler, Computational Materials Engineering, Elsevier Academic Press, London, UK, 2007
5. H.W. Hesselbarth and I.R. Gobel, Simulation of Recrystallization by Cellular Automata, Acta Metal. Mater., 1991, 39, p 2135–214310.1016/0956-7151(91)90183-2 ↗
6. R.L. Goetz and V. Seetharaman, Static Recrystallization Kinetics with Homogeneous and Heterogeneous Nucleation Using a Cellular Automata Model, Metall. Mater. Trans., 1998, 29A, p 2307–232110.1007/s11661-998-0108-z ↗
7. C.H.J. Davies, The Effect of Neighborhood on the Kinetics of a Cellular Automaton Recrystallization Model, Scripta Metall. Mater., 1995, 33, p 1139–114310.1016/0956-716X(95)00335-S ↗
8. C.H.J. Davies, Growth of Nuclei in a Cellular Automaton Simulation of Recrystallization, Scripta Metall. Mater., 1997, 36, p 35–4010.1016/S1359-6462(96)00331-4 ↗
9. V. Marx, F.R. Reher, and G. Gottestin, Simulation of Primary Recrystallization Using a Modified Three-Dimensional Cellular Automation, Acta Mater., 1999, 47, p 1219–123010.1016/S1359-6454(98)00421-2 ↗
10. D. Raabe and R. Becker, Coupling of a Crystal Plasticity Finite Element Model with a Probabilistic Cellular Automaton for Simulating Primary Static Recrystallization in Aluminum, Modell. Simul. Mater. Sci. Eng., 2000, 8, p 445–46210.1088/0965-0393/8/4/304 ↗
11. G. Kugler and R. Turk, Study of the Influence of Initial Microstructure Topology on the Kinetics of Static Recrystallization Using a Cellular Automata Model, Comput. Mater. Sci., 2006, 37, p 284–29110.1016/j.commatsci.2005.07.005 ↗
12. P.J. Hurley and F.J. Humphreys, Modeling the Recrystallization of Single-Phase Aluminum, Acta Mater., 2003, 51, p 3779–379310.1016/S1359-6454(03)00192-7 ↗
13. R. Dewri and N. Chakraborti, Simulating Recrystallization Through Cellular Automata and Genetic Algorithms, Modell. Simul. Mater. Sci. Eng., 2005, 13, p 173–18310.1088/0965-0393/13/2/002 ↗
14. P.R. Rios and J.C. Pereira, Comparison of Analytical Models with Cellular Automata Simulation of Recrystallization in Two Dimensions, Mater. Res., 2005, 8, p 341–34510.1590/S1516-14392005000300020 ↗
15. P.R. Rios and J.C. Pereira, Microstructural Descriptors and Cellular Automata Simulation of the Effects of Non-Random Nuclei Location on Recrystallization in Two Dimensions, Mater. Res., 2006, 9, p 165–17010.1590/S1516-14392006000200010 ↗
16. G.F. Janssens, Random Grid, Three-Dimensional, Space-Time Coupled Cellular Automata for the Simulation of Recrystallization and Grain Growth, Modell. Simul. Mater. Sci. Eng., 2003, 11, p 157–17110.1088/0965-0393/11/2/304 ↗
17. R.L. Goetz and V. Seetharaman, Modeling Dynamic Recrystallization Using Cellular Automata, Scripta Metall. Mater., 1998, 38, p 405–41310.1016/S1359-6462(97)00500-9 ↗
18. R. Ding and Z.X. Guo, Coupled Quantitative Simulation of Microstructural Evolution and Plastic Flow During Dynamic Recrystallization, Acta Mater., 2001, 49, p 3163–317510.1016/S1359-6454(01)00233-6 ↗
19. J. Kroc, Application of Cellular Automata Simulations to Modeling of Dynamic Recrystallization, Comput. Sci., 2329, 2002, p 773–782
20. M. Qian and Z.X. Guo, Cellular Automata Simulation of Microstructural Evolution During Dynamic Recrystallization of an HY-100 Steel, Mater. Sci. Eng. A, 2004, 365, p 180–18510.1016/j.msea.2003.09.025 ↗
21. G. Kugler and R. Turk, Modeling the Dynamic Recrystallization Under Multi-Stage Hot Deformation, Acta Mater., 2004, 52, p 4659–466810.1016/j.actamat.2004.06.022 ↗
22. X. Song, M. Rettenmayr, C. Müller, and H.E. Exner, Modeling of Recrystallization After Inhomogeneous Deformation, Metall. Mater. Trans., 2001, 32A, p 2199–220610.1007/s11661-001-0195-6 ↗
23. N. Hansen and B. Ralph, The Strain and Grain Size Dependence of the Flow Stress of Copper, Acta Mater., 1982, 30, p 411–41710.1016/0001-6160(82)90221-8 ↗
24. M. Oyarzabal, A. Martınez-de-Guerenu, and I. Gutierrez, Effect of Stored Energy and Recovery on the Overall Recrystallization Kinetics of a Cold Rolled Low Carbon Steel, Mater. Sci. Eng. A, 2008, 485, p 200–20910.1016/j.msea.2007.07.077 ↗
25. D. Rollett, D.J. Srolovitz, R.D. Doherty, and M.P. Anderson, Computer Simulation of Recrystallization Non-Uniformly Deformed Metals, Acta Mater., 1989, 37, p 1248–1254
26. R. Mendoza, A. Molina, F. Serrania, and J.A. Juarez-Islas, Mechanical Properties of a Recrystallized Low Carbon Steel, Scripta Mater., 2003, 48, p 391–39510.1016/S1359-6462(02)00453-0 ↗
27. H.W. Luo, J. Sietsma, and S. van der Zwaag, Effect of Inhomogeneous Deformation on the Recrystallization Kinetics of Deformed Metals, ISIJ Int., 2004, 44, p 1931–193910.2355/isijinternational.44.1931 ↗
28. P.N. Kalu and D.R. Waryoba, A JMAK-Microhardness Model for Quantifying the Kinetics of Restoration Mechanisms in Inhomogeneous Microstructure, Mater. Sci. Eng. A, 2007, 464, p 68–7510.1016/j.msea.2007.01.124 ↗
29. X. Song and M. Rettenmayer, Modeling Study on Recrystallization, Recovery and their Temperature Dependence in Inhomogeneously Deformed Materials, Mater. Sci. Eng. A, 2002, 332, p 153–16010.1016/S0921-5093(01)01720-8 ↗
30. Y.C. Lin, M. Chen, and J. Zhong, Study of Static Recrystallization Kinetics in a Low Alloy Steel, Comput. Mater. Sci., 2008, 44, p 316–32110.1016/j.commatsci.2008.03.027 ↗
31. M. Kazeminezhad, On the Modeling of the Static Recrystallization Considering the Initial Grain Size Effects, Mater. Sci. Eng. A, 2008, 486, p 202–20710.1016/j.msea.2007.08.071 ↗