Wetting of Sn-Zn-xIn (x = 0.5, 1.0, 1.5 wt%) Alloys on Cu and Ni Substrates
Source abstract
Abstract
Wetting angles of Sn-8.8Zn and Sn-8.8Zn- x In alloys ( x = 0.5, 1.0, 1.5 wt%) were studied with the sessile drop method. Wetting tests were carried out for 900 s in the presence of ORM0 flux at 493, 523, and 573 K on copper and at 523 K on nickel substrates, respectively. It was found that the addition of In to Sn-8.8Zn alloy improves its wetting on both substrates by reducing the value of apparent wetting angle. Also, with increasing temperature a decrease of wetting angle on copper is observed in the case of 0 and 1.5 wt% of In alloys. Solidified solder-substrate couples were cross-sectioned and examined with scanning electron microscopy coupled with electron dispersive X-ray analysis. Interlayers were found at the interface of solders with copper and nickel, and their compositions are close to Cu 5 Zn 8 and Ni 5 Zn 21 intermetallics, respectively. However, in the case of Sn-8.8Zn-1.5/Ni couple small scallops are observed instead of continuous interlayer.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. S.A. Mucklejohn, D.R. Anderson, N. Hoo, A. Kondentsov, A. Kroupa, I. Plotog, Z. Toth, and A. Watson, Protocol for the Evaluation of Alloys to be Used as Replacements for High Temperature Lead-Containing Solders in Products & Industrial Processes, COST Action MP0602 Advanced Solder Materials for High Temperature Application (HiSOLD), June 22-24, 2011 (Brno)
2. T. Ichitsubo, E. Matsubara, K. Fujiwara, M. Yamaguchi, H. Irie, S. Kumamoto, and T. Anada, Control of Compound Forming Reaction at the Interface Between SnZn Solder and Cu Substrate, J. Alloys Compd., 2005, 392(1–2), p 200–20510.1016/j.jallcom.2004.09.043 ↗
3. K. Suganuma and K.S. Kim, Sn-Zn Low Temperature Solder, J. Mater. Sci.: Mater. Electron., 2007, 18(1–3), p 121–127
4. L. Zhang, S. Xue, L. Gao, Z. Sheng, and H. Ye, Development of Sn-Zn Lead-Free Solders Bearing Alloying Elements, J. Mater. Sci.: Mater. Electron., 2010, 21(1), p 1–1510.1007/s10854-009-0014-1 ↗
5. M. McCormack, S. Jin, H.S. Chen, and D.A. Machusak, New Lead-Free Sn-Zn-ln Solder Alloys, J. Electron. Mater., 1994, 23(7), p 687–69010.1007/BF02653357 ↗
6. S. Yu, C. Liao, M. Hon, and M. Wang, The Effects of Flux on the Wetting Characteristics of Near-Eutectic Sn-Zn-In Solder on Cu Substrate, J. Mater. Sci., 2000, 35(17), p 4217–422410.1023/A:1004867329163 ↗
7. T. Takemoto and M. Miazaki, Effect of Excess Temperature Above Liquidus of Lead-Free Solders on Wetting Time in Wetting Balance Test, Mater. Trans., 2001, 42(5), p 745–75010.2320/matertrans.42.745 ↗
8. Y. Cui, X.J. Liu, I. Ohnuma, R. Kainuma, H. Ohtani, and K. Ishida, Thermodynamic Calculation of the In-Sn-Zn Ternary System, J. Alloys Compd., 2001, 320(2), p 234–24110.1016/S0925-8388(00)01484-5 ↗
9. P. Fima, W. Gasior, A. Sypien, and Z. Moser, Wetting of Cu by Bi-Ag Based Alloys with Sn and Zn Additions, J. Mater. Sci., 2010, 45(16), p 4339–434410.1007/s10853-010-4291-0 ↗
10. R.J. Klein-Wassink, Soldering in Electronics, 2nd ed., Electrochemical Publications LTD, Isle of Man, 1989
11. S.C. Cheng and K.L. Lin, The Thermal Property of Lead-Free Sn-8.55Zn-1Ag-XAl Solder Alloys and Their Wetting Interaction with Cu, J. Electron. Mater., 2002, 31(9), p 940–94510.1007/s11664-002-0187-3 ↗
12. C.W. Huang and K.L. Lin, Wetting Properties of and Interfacial Reactions in Lead-Free Sn-Zn Based Solders on Cu and Cu Plated with an Electroless Ni-P/Au Layer, Mater. Trans., 2004, 45(2), p 588–59410.2320/matertrans.45.588 ↗
13. Y.C. Chan, M.Y. Chiu, and T.H. Chuang, Intermetallic Compounds Formed During the Soldering Reactions of Eutectic Sn-9Zn with Cu and Ni Substrates, Z. Metallkd., 2002, 93(2), p 95–9810.3139/146.020095 ↗
14. C. Chou, S.W. Chen, and Y. Chang, Interfacial Reactions in the Sn-9Zn-(xCu)/Cu and Sn-9Zn-(xCu)/Ni Couples, J. Mater. Res., 2006, 21(7), p 1849–185610.1557/jmr.2006.0229 ↗
15. J. Chang, S.-K. Seo, and H.M. Lee, Phase Equilibria in the Sn-Ni-Zn Ternary System: Isothermal Sections at 200 °C, 500 °C, and 800 °C, J. Electron. Mater., 2010, 39(12), p 2643–265210.1007/s11664-010-1313-2 ↗
16. W. Zhu, H. Liu, J. Wang, G. Ma, and Z. Jin, Interfacial Reactions Between Sn-Zn Alloys and Ni Substrates, J. Electron. Mater., 2010, 39(2), p 209–21410.1007/s11664-009-0950-9 ↗