Synthesis of High-Temperature Self-lubricating Wear Resistant Composite Coating on Ti6Al4V Alloy by Laser Deposition
Source abstract
Abstract
Laser deposition was adopted to prepare novel Ni-based solid solution (γ-NiCrAlTi)/ TiC/α-Ti/CaF2 high-temperature self-lubricating wear resistant composite coating on Ti6Al4V alloy. Microstructure, micro-hardness, wear behavior, and counter-body effect of the coating were investigated systematically. It can be seen that the coating mainly consists of γ-NiCrAlTi, TiC, α-Ti, and small fine CaF2 particles. Average micro-hardness of the coating is 1023 HV0.3, which is about three-factor higher than that of Ti6Al4V substrate (380 HV0.3). The friction coefficient and wear rate of the coating decrease at all test temperatures to different extents with respect to the substrate. The improvement in wear resistance is believed to be the combined effects of the γ-NiCrAlTi solid solution, the dominating anti-wear capabilities of the reinforced TiC carbides, and the self-lubricating property of CaF2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. B.S. Mann and B.K. Vivek Arya, Pant. Enhanced Erosion Protection of TWAS Coated Ti6Al4V Alloy Using Boride Bond Coat and Subsequent Laser Treatment, J. Mater. Eng. Perform., 2011, 20, p 932–94010.1007/s11665-010-9735-9 ↗
2. S. Durdu, O.F. Deniz, I. Kutbay, and M. Usta, Characterization and Formation of Hydroxyapatite on Ti6Al4V Coated by Plasma Electrolytic Oxidation, J. Alloys Compd., 2013, 551, p 422–42910.1016/j.jallcom.2012.11.024 ↗
3. M. Li, J. Huang, Y.Y. Zhu, and Z.G. Li, Effect of Heat Input on the Microstructure of In-Situ Synthesized TiN-TiB/Ti Based Composite Coating by Laser Cladding, Surf. Coat. Technol., 2012, 206, p 4021–402610.1016/j.surfcoat.2012.03.082 ↗
4. X.B. Liu, X.J. Meng, H.Q. Liu, G.L. Shi, S.H. Wu, C.F. Sun, M.D. Wang, and L.H. Qi, Development and Characterization of Laser Clad High Temperature Self-lubricating Wear Resistant Composite Coatings on Ti-6Al-4V, Mater. Des., 2014, 55, p 404–40910.1016/j.matdes.2013.09.038 ↗
5. X.B. Liu, C. Zheng, Y.F. Liu, J.W. Fan, M.S. Yang, X.M. He, M.D. Wang, H.B. Yang, and L.H. Qi, A Comparative Study of Laser Cladding High Temperature Wear-Resistant Composite Coating with the Addition of Self-lubricating WS2 and WS2/(Ni-P) Encapsulation, J. Mater. Process. Technol., 2013, 213, p 51–5810.1016/j.jmatprotec.2012.07.017 ↗
6. H. Yan, A.H. Wang, K.D. Xu, W.Y. Wang, and Z.W. Huang, Microstructure and Interfacial Evaluation of Co-Based Alloy Coating on Copper by Pulsed Nd:YAG Multilayer Laser Cladding, J. Alloys Compd., 2010, 505, p 645–65310.1016/j.jallcom.2010.06.099 ↗
7. Z. Wang, K. Guan, M. Gao, X. Li, X. Chen, and X. Zeng, The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting, J. Alloys Compd., 2012, 513, p 518–52310.1016/j.jallcom.2011.10.107 ↗
8. L.Q. Kong, Q.L. Bi, S.Y. Zhu, J. Yang, and W.M. Liu, Tribol Properties of ZrO2 (Y2O3)-Mo -BaF2/CaF2 Composites at High Temperatures, Tribol. Int., 2012, 45, p 43–4910.1016/j.triboint.2011.09.008 ↗
9. W.C. Tseng and J.N. Aoh, Simulation Study on Laser Cladding on Preplaced Powder Layer with a Tailored Laser Heat Source, Opt. Laser Technol., 2013, 48, p 141–15210.1016/j.optlastec.2012.09.014 ↗
10. J.H. Yuan, Y.C. Zhu, H. Ji, X.B. Zheng, Q.C. Ruan, Y. Niu, Z.W. Liu, and Y. Zeng, Microstructures and Tribological Properties of Plasma Sprayed WC-Co-Cu-BaF2/CaF2 Self-lubricating Wear Resistant Coatings, Appl. Surf. Sci., 2010, 256, p 4938–494410.1016/j.apsusc.2010.03.006 ↗
11. Z.M. Liu and T.H.C. Childs, The Study of Wear Characteristics of Sintered High Speed Steels Containing CaF2, MnS and TiC Additives at Elevated Temperature, Wear, 2004, 257, p 435–44010.1016/j.wear.2004.01.016 ↗
12. W.G. Liu, X.B. Liu, Z.G. Zhang, and J. Guo, Development and Characterization of Composite Ni-Cr-C-CaF2 Laser Cladding on γ-TiAl Intermetallic Alloy, J. Alloys Compd., 2009, 470, p L25–L2810.1016/j.jallcom.2008.03.020 ↗
13. J.N. Li, C.Z. Chen, and L. Zong, Microstructure Characteristics of Ti3Al/TiC Ceramic Layer Deposited by Laser Cladding, Int. J. Refract. Met. Hard Mater., 2011, 29, p 49–5310.1016/j.ijrmhm.2010.07.001 ↗
14. J.N. Li, C.Z. Chen, and Q.S. He, Influence of Cu on Microstructure and Wear Resistance of TiC/TiB/TiN Reinforced Composite Coatings Fabricated by Laser Cladding, Mater. Chem. Phys., 2012, 133, p 741–74510.1016/j.matchemphys.2012.01.082 ↗
15. C. Bezencon, A. Schnell, and W. Kurz, Epitaxial Deposition of MCrAlY Coatings on a Ni-Base Superalloy by Laser Cladding, Scripta Mater., 2003, 49, p 705–70910.1016/S1359-6462(03)00369-5 ↗
16. J. Wang, R.G. Song, X. Lin, and W.D. Huang, Microstructure and Properties of Laser Cladding TiC/TiAl Composite Coatings on γ-TiAl Intermetallic Alloy, Surf. Eng., 2009, 25, p 19610.1179/174329408X326452 ↗
17. X.B. Liu, S.H. Shi, J. Guo, G.Y. Fu, and M.D. Wang, Microstructure and Wear Behavior of γ/Al4C3/TiC/CaF2 Composite Coating on γ-TiAl Intermetallic Alloy Prepared by Nd:YAG Laser Cladding, Appl. Surf. Sci., 2009, 255, p 5662–566810.1016/j.apsusc.2008.11.023 ↗
18. F. Zhang and M.J. Yan, Microstructure and Wear Resistance of In Situ Formed Duplex Coating Fabricated by Plasma Nitriding Ti Coated 2024 Al Alloy, J. Mater. Sci. Technol., 2014, 30, p 1278–128310.1016/j.jmst.2013.10.032 ↗
19. L. Bourithis, A. Milonas, and G.D. Papadimitriou, Plasma Transferred Arc Surface Alloying of a Construction Steel to Produce a Metal Matrix Composite Tool Steel with TiC as Reinforcing Particles, Surf. Coat. Technol., 2003, 165, p 286–29510.1016/S0257-8972(02)00744-2 ↗
20. J. Cho, Y. Xiong, J. Kim, C. Lee, and S.H. Wang, Tribological Behavior of NiCr-Base Blended and Nanostructured Composite APS Coatings by Rig Test, Wear, 2008, 26, p 1565–157110.1016/j.wear.2008.03.008 ↗
21. L. Liu, Y.J. Shangguan, H.B. Tang, and H.M. Wang, Fretting Wear Behavior of Laser-Nitrided Ti-5Al-5Mo-5V-1Cr-1Fe Alloy Fabricated by Laser Melting Deposition, Appl. Phys. A, 2014, doi: 10.1007/s00339-014-8381-8
22. J. Cheng, J. Yang, X.H. Zhang, H. Zhong, J.Q. Ma, F. Li, L.C. Fu, Q.L. Bi, J.S. Li, and W.M. Liu, High Temperature Tribological Behavior of a Ti-46Al-2Cr-2Nb Intermetallics, Intermetallics, 2012, 31, p 120–12610.1016/j.intermet.2012.06.013 ↗
23. B. Selvam, P. Marimuthu, R. Narayanasamy, V. Anandakrishnan, K.S. Tun, and M. Gupta, Dry Sliding Wear Behaviour of Zinc Oxide Reinforced Magnesium Matrix Nano-composites, Mater. Des., 2014, 58, p 475–48110.1016/j.matdes.2014.02.006 ↗
24. B. Cai, Y.F. Tan, Y.Q. Tu, X.L. Wang, and H. Tan, Tribological Behavior and Mechanisms of Graphite/CaF2/TiC/Ni-Based Alloy Composite Coatings, Trans. Nonferrous Met. Soc. China, 2011, 21, p 2426–2432 [in Chinese]10.1016/S1003-6326(11)61031-5 ↗
25. S.R. Bakshi, D. Wang, T. Price, D. Zhang, A.K. Keshri, Y. Chen, D.G. McCartney, P.H. Shipway, and A. Agarwal, Microstructure and Wear Properties of Aluminum/Aluminum-Silicon Composite Coatings Prepared by Cold Spraying, Surf. Coat. Technol., 2009, 204, p 503–51010.1016/j.surfcoat.2009.08.018 ↗
26. R. Anandkumar, A. Almeida, and R. Vilar, Wear Behavior of Al-12Si/TiB2 Coatings Produced by Laser Cladding, Surf. Coat. Technol., 2011, 205, p 3824–383210.1016/j.surfcoat.2011.01.048 ↗
27. Y. Liu and H.M. Wang, Toughening and Dry Sliding Wear Resistance of Co3Mo2Si Alloys, Wear, 2013, 297, p 952–95710.1016/j.wear.2012.11.021 ↗
28. R.L. Sun, Y.W. Lei, and W. Niu, Laser Clad TiC Reinforced NiCrBSi Composite Coatings on Ti-6Al-4V Alloy Using a CW CO2 Laser, Surf. Coat. Technol., 2009, 203, p 1395–139910.1016/j.surfcoat.2008.11.012 ↗
29. X.M. He, X.B. Liu, M.D. Wang, and M.S. Yang, Elevate Temperature Tribological Behavior of Laser Cladding Ni-Based Composite Coating on Austenitic Stainless Steel, Appl. Surf. Sci., 2011, 258, p 535–54110.1016/j.apsusc.2011.08.072 ↗
30. C. Guo, J.S. Zhou, Y.J. Yu, L.Q. Wang, H.D. Zhou, and J.M. Chen, Microstructure and Tribological Properties of Ti-Cu Intermetallic Compound Coating, Mater. Des., 2012, 36, p 482–48910.1016/j.matdes.2011.10.033 ↗
31. X.B. Liu, H.Q. Liu, Y.F. Liu, X.M. He, C.F. Sun, M.D. Wang, H.B. Yang, and L.H. Qi, Effects of Temperature and Normal Load on Tribological Behavior of Nickel-Based High Temperature Self-lubricating Wear-Resistant Composite Coating, Composites B, 2013, 53, p 347–35410.1016/j.compositesb.2013.05.032 ↗