Effects of Strain Rates on Mechanical Properties and Fracture Mechanism of DP780 Dual Phase Steel
Source abstract
Abstract
The mechanical properties of DP780 dual phase steel were measured by quasi-static and high-speed tensile tests at strain rates between 0.001 and 1000 s−1 at room temperature. The deformation and fracture mechanisms were analyzed by observation of the tensile fracture and microstructure near the fracture. Dynamic factor and feret ratio quantitative methods were applied to study the effect of strain rate on the microstructure and properties of DP780 steel. The constitutive relation was described by a modified Johnson-Cook and Zerilli-Armstrong model. The results showed that the strain rate sensitivity of yield strength is bigger than that of ultimate tensile strength; as strain rate increased, the formation of microcracks and voids at the ferrite/martensite interface can be alleviated; the strain rate effect is unevenly distributed in the plastic deformation region. Moreover, both models can effectively describe the experimental results, while the modified Zerilli-Armstrong model is more accurate because the strain-hardening rate of this model is independent of strain rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. S.C. Li, Y.L. Kang, and S. Kuang, Effects of Microstructure on Fatigue Crack Growth Behavior in Cold-Rolled Dual Phase Steels, Mater. Sci. Eng. A, 2014, 612, p 153–16110.1016/j.msea.2014.06.002 ↗
2. M. Itabashi and K. Kawata, Carbon Content Effect on High-Strain-Rate Tensile Properties for Carbon Steels, Int. J. Impact. Eng., 2000, 24, p 117–13110.1016/S0734-743X(99)00050-0 ↗
3. W. Wang, M. Li, C. He, X. Wei, D. Wang, and H. Du, Experimental Study on High Strain Rate Behavior of High Strength 600-1000 MPa Dual Phase Steels and 1200 MPa Fully Martensitic Steels, Mater. Des., 2012, 47, p 510–52110.1016/j.matdes.2012.12.068 ↗
4. C.C. Roth and D. Mohr, Effect of Strain Rate on Ductile Fracture Initiation in Advanced High Strength Steel Sheets: Experiments and Modeling, Int. J. Plast., 2014, 56, p 19–4410.1016/j.ijplas.2014.01.003 ↗
5. S. Oliver, T.B. Jones, and G. Fourlaris, Dual Phase Versus TRIP Strip Steels: Microstructural Changes as a Consequence of Quasi-static and Dynamic Tensile Testing, Mater. Charact., 2007, 58, p 390–40010.1016/j.matchar.2006.07.004 ↗
6. S. Oliver, G. Fourlaris, and T.B. Jones, Dual Phase Versus TRIP Strip Steels: A Comparison of Dynamic Properties for Automotive Crash Performance, Mater. Sci. Technol., 2007, 23, p 423–43110.1179/174328407X168937 ↗
7. J. Huh, H. Huh, and C.S. Lee, Effect of Strain Rate on Plastic Anisotropy of Advanced High Strength Steel Sheets, Int. J. Plast., 2013, 44, p 23–4610.1016/j.ijplas.2012.11.012 ↗
8. D.Y. Dong, Y. Liu, L. Wang, and L.J. Su, Effect of Strain Rate on Dynamic Deformation Behavior of DP780 Steel, Acta. Metall. Sin., 2013, 49, p 159–16610.3724/SP.J.1037.2012.00515 ↗
9. V. Tarigopula, O.S. Hopperstad, M. Langseth, A.H. Clausen, and F. Hild, A Study of Localisation in Dual-phase High-Strength Steels under Dynamic Loading Using Digital Image Correlation and FE Analysis, Int. J. Solids Struct., 2008, 45, p 601–61910.1016/j.ijsolstr.2007.08.021 ↗
10. A. He, G.L. Xie, H.L. Zhang, and X.T. Wang, A Comparative Study on Johnson-Cook, Modified Johnson-Cook and Arrhenius-type Constitutive Models to Predict the High Temperature Flow Stress in 20CrMo Alloy Steel, Mater. Des., 2013, 52, p 677–68510.1016/j.matdes.2013.06.010 ↗
11. R.B. Song and Q.F. Dai, Dynamic Deformation Behavior of Dual Phase Ferritic-Martensitic Steel at Strain Rates from 10−4 to 2000 s−1, J. Iron Steel Res. Int., 2013, 20, p 48–5310.1016/S1006-706X(13)60140-5 ↗
12. A. Nouri, H. Saghafian, and S. Kheirandish, Effects of Silicon Content and Intercritical Annealing on Manganese Partitioning in Dual Phase Steels, J. Iron Steel Res. Int., 2010, 17, p 44–5010.1016/S1006-706X(10)60098-2 ↗
13. J.B. Qu, W. Dabboussi, F. Hassani, J. Nemes, and S. Yue, Effect of Microstructure on the Dynamic Deformation Behavior of Dual Phase Steel, Mater. Sci. Eng. A, 2008, 479, p 93–10410.1016/j.msea.2007.06.020 ↗
14. J.H. Sung, J.H. Kim, and R.H. Wagoner, A Plastic Constitutive Equation Incorporating Strain, Strain-Rate, and Temperature, Int. J. Plast., 2010, 26, p 1746–177110.1016/j.ijplas.2010.02.005 ↗
15. S.L. Yan, H. Yang, H.W. Li, and G.Y. Ren, Experimental Study of Macro-Micro Dynamic Behaviors of 5A0X Aluminum Alloys in High Velocity Deformation, Mater. Sci. Eng. A, 2014, 598, p 197–20610.1016/j.msea.2013.12.001 ↗
16. G.R. Johnson and W.H. Cook, Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures, Eng. Fract. Mech., 1985, 21, p 31–4810.1016/0013-7944(85)90052-9 ↗
17. F.J. Zerilli and R.W. Armstrong, Dislocation-Mechanics-Based Constitutive Relations for Material Dynamics Calculations, J. Appl. Phys., 1987, 61, p 181610.1063/1.338024 ↗