Characterization of Corrosion Product Layers from CO2 Corrosion of 13Cr Stainless Steel in Simulated Oilfield Solution
Source abstract
Abstract
The influence of temperature and flow rate on the characterization and mechanisms of corrosion product layers from CO2 corrosion of 13Cr stainless steel was carried out in simulated oilfield solution. Cyclic potentiodynamic polarization method as well as weight loss tests in autoclave were utilized to investigate pitting corrosion behavior at various temperatures. Weight loss tests were performed at 100 and 160 °C under dynamic and static flow conditions. At the same time, the significant pitting parameters such as Ecorr, Epit, Epp, ∆E, and Ipass in cyclic polarization curves at various temperatures were analyzed and compared for revealing the pitting behavior of 13Cr stainless steel. The surface measurement techniques such as SEM, XRD, and XPS were used to detect the corrosion product layers. The results showed that both temperature and flow rate had significant effects on characterization of corrosion product layers or passive films formed on 13Cr stainless steel in CO2 corrosion system. At high temperature, lots of pits were formed at the localized corrosion areas of metal surfaces. Corrosion rates under the condition of 5 m/s were higher than those under the static condition regardless of the test temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Structural Integrity and Reliability Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. D.S. Carvalho, C.J.B. Joia, and O.R. Mattos, Corrosion Rate of Iron and Iron-Chromium Alloys in CO-Medium, Corros. Sci., 2005, 47, p 2974–298610.1016/j.corsci.2005.05.052 ↗
2. B.R. Linter and G.T. Burstein, Reactions of Pipeline Steels in Carbon Dioxide Solutions, Corros. Sci., 1999, 41, p 117–13910.1016/S0010-938X(98)00104-8 ↗
3. E. Dayalan, F.D. Moraes, J.R. Shadley, S.A. Shirazi, and E.F. Rybicki, CO 2 Corrosion Prediction in Pipe Flow Under FeCO 3 -Forming Conditions, Corrosion/98, NACE International, Houston, TX, 1998, Paper no. 51
4. D.A. Lopez, T. Perez, and S.N. Simison, The Influence of Microstructure and Chemical Composition of Carbon and Low Alloy Steels in CO2 Corrosion. A State-of-art Appraisal, Mater. Des., 2003, 24, p 561–57510.1016/S0261-3069(03)00158-4 ↗
5. K. Masamura, S. Hashizume, Y. Inohara, and Y. Minami, Estimation Models of Corrosion Rates of 13% Alloys in CO 2 Environments, Corrosion/99, NACE International, Houston, TX, 1999, Paper no. 583
6. K. Denpo and H. Ogawa, Fluid Flow Effects on CO2 Corrosion Resistance of Oil Well Materials, Corrosion, 1993, 49(6), p 442–44910.5006/1.3316070 ↗
7. T. Hara, H. Asahi, Y. Suehiro, and H. Kaneta, Effect of Flow Velocity on Carbon Dioxide Behavior in Oil and Gas Environments, Corrosion, 1994, 56(8), p 860–86610.5006/1.3280589 ↗
8. J.M. Bastidas, C.L. Torres, E. Cano, and J.L. Polo, Influence of Molybdenum on Passivation of Polarized Stainless Steels in a Chloride Environment, Corros. Sci., 2002, 44, p 625–63310.1016/S0010-938X(01)00072-5 ↗
9. R.C. Newman, Understanding the Corrosion of Stainless Steel, Corrosion, 2001, 57, p 1030–104110.5006/1.3281676 ↗
10. M.S. Cayard and R.D. Kane, Corrosion Degradation Mechanism in Coiled Tubing. Corrosion/98, NACE International, Houston, TX, 1998, Paper no. 112
11. S. Hashizume, T. Takaoka, Y. Minami, and Y. Ishizawa, Corrosion Resistance and Mechanical Properties of High-Strength 15%Cr Stainless Steel for OCTG, Corrosion/95, NACE International, Houston, TX, 1995, Paper no. 78
12. Y. Miyata, Y. Yamane, O. Furukimi, H. Niwa, and K. Tamaki, Corrosion of New 13Cr Stainless Steel OCTG in Severe CO 2 Environment, Corrosion/95, NACE International, Houston, TX, 1995, Paper no. 83
13. M.B. Kermani, G. Weighhill, T. Pendlington, and G. Elliot, Operational Experience of Using 13%Cr Tubular Steels, Corrosion/95, NACE International, Houston, TX, 1995, Paper no. 96
14. K. Videm and A. Dugstad, Corrosion of Carbon Steel in an Aqueous Carbon Dioxide Environment, Part 1: Solution effects, Mater. Perform., 1989, 28, p 64
15. C.Y. Chao, L.F. Lin, and D.D. Macdonald, A Point Defect Model for Anodic Passive Films, J. Electrochem. Soc., 1981, 128, p 1187–119410.1149/1.2127591 ↗
16. D. Bauernfeind and G. Mori, Corrosion of Superaustenitic Stainless Steels in Chloride- and Sulfate-Containing Media—Influence Of Alloying Elements Cr, Mo, N and Cu, Corrosion/03, NACE International, Houston, TX, 2003, Paper no. 257
17. J.O. Park, S. Matsch, and H. Bohni, Effect of Temperature and Chloride Concentration on Pit Initiation and Early Pit Growth of Stainless Steel, J. Electrochem. Soc., 2002, 149, p B34–B3910.1149/1.1430415 ↗
18. A. Ikeda, M. Ueda, and S. Mukai, CO 2 Corrosion Behavior and Mechanism of Carbon Steel and Alloy Steel, Corrosion/83, NACE International, Houston, TX, 1983, Paper no. 45
19. H.S. Isaacs and G. Kissel, Surface Preparation and Pit Propagation in Stainless Steels, J. Electrochem. Soc., 1972, 119, p 1628–163210.1149/1.2404061 ↗
20. B.E. Wilde and E. Willianms, The Relevance of Accepted Electrochemical Pitting Tests to Long-Term Pitting and Crevice Corrosion Behavior of Stainless Steels in Marine Environments, J. Electrochem. Soc., 1971, 118, p 1057–106210.1149/1.2408246 ↗
21. Z. Szklarska-Smialowska, Pitting Corrosion of Metals, National Association of Corrosion Engineers, Houston, 1986, p 351
22. D.A. Jones, Principles and Preventions of Corrosion, Macmillan Publishing Company, New York, 1992
23. G. Schmitt, Fundamental Aspect of CO 2 Corrosion, Corrosion/84, NACE International, Houston, TX, 1984, Paper no. 10
24. K. Videm, Fundamental Studies Aimed at Improving Models for Prediction of CO 2 Corrosion, Corrosion/2000, NACE International, Houston, TX, 2000, Paper no. 39
25. X.P. Guo and Y. Tomoe, Electrochemical Behavior of Carbon Steel in Carbon Dioxide Saturated Diglycolamine Solutions, Corrosion, 1998, 54(11), p 93110.5006/1.3284812 ↗
26. J.K. Heuer and J.F. Stubbins, An XPS Characterization of FeCO3 Films from CO2 Corrosion, Corros. Sci., 1999, 41, p 1231–124310.1016/S0010-938X(98)00180-2 ↗
27. D.A. Lopez, W.H. Schreiner, S.R. de Sanchez, and S.N. Simison, The Influence of Carbon Steel Microstructure on Corrosion Layers. An XPS and SEM Characterization, Appl. Surf. Sci., 2003, 207, p 69–8510.1016/S0169-4332(02)01218-7 ↗
28. B.E. Wilde, A Critical Appraisal of Some Popular Laboratory Electrochemical Tests for Predicting the Localized Corrosion Resistance in Sea Water, Corrosion, 1972, 28, p 283–29110.5006/0010-9312-28.8.283 ↗
29. H.P. Leckie and H.H. Uhlig, Environmental Factors Affecting the Critical Potential for Pitting 18-8 Stainless Steel, J. Electrochem. Soc., 1966, 113, p 1262–126710.1149/1.2423801 ↗