Correlation Between Tensile Strength and Hardness of Electron Beam Welded TC4-DT Joints
Source abstract
Abstract
Correlation between tensile strength and hardness for damage-tolerant Ti-6Al-4V (TC4-DT) alloy and its electron beam welded joints was investigated. Yield strength (YS), ultimate tensile strength (UTS) and strain hardening coefficient of base metal and weld metal were obtained using uniaxial tensile tests. Microhardness of the base metal, heat affected zone, and weld metal was measured. Then, the linear correlations among the yield strength, tensile strength, and hardness were proposed. Moreover, correlation between strain hardening coefficient and the ratio of YS to UTS (YS/UTS) was established. The results indicate that microhardness can be used to predict the YS and UTS of the TC4-DT welded joint successfully. In addition, the strain hardening coefficient can be predicted by the YS/UTS. The prediction of strength and strain hardening coefficient is in agreement with the experiments. The correlations are applicable and valuable for the strength prediction of narrow welded fusion zone and heat affected zone based on the microhardness measurement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R.R. Boyer, Overview on the Use of Titanium in the Aerospace Industry, Mater. Sci. Eng., A, 2009, 506, p 103–114
2. Z. Zhang, Metallurgy and Heat Treatment of Ti Alloy, Metallurgical Industry Press, Beijing, 2009
3. W.P. Fang, Z.Y. Mao, Y.W. Shi, and Z.Y. Tang, Research Development and Application of Damage Tolerance Titanium Alloy, J. Mater. Eng., 2010, 9, p 95–98
4. B.D. Venkatesh, D.L. Chen, and S.D. Bhole, Effect of Heat Treatment on Mechanical Properties of Ti-6Al-4V ELI, Alloy, Mater. Sci. Eng., A, 2009, 506, p 117–12410.1016/j.msea.2008.11.018 ↗
5. H. Yuan, H. Yu, J.X. Wang, X.N. Wang, Z.S. Zhu, and X.H. Li, The Damage Tolerance Properties of the EBW Joint for TC4-DT Titanium Alloy, J. Mater. Eng., 2007, 8, p 17–19
6. Z.S. Zhu, S.J. Ma, X.N. Wang, L. Tong, X.R. Wu, Y.Q. Zhao, and H. Qu, Study on Fatigue Crack Propagation Rate of TC4-DT Damage Tolerant Titanium Alloy, Titanium Ind. Prog., 2005, 22, p 10–13
7. Y.L. Qi, J. Deng, Q. Hong, and L.Y. Zeng, Electron Beam Welding, Laser Beam Welding and Gas Tungsten Arc Welding of Titanium Sheet, Mater. Sci. Eng., A, 2000, 280, p 177–18110.1016/S0921-5093(99)00662-0 ↗
8. IIW FFS Recommendations for Fracture Assessment of Weld Flaws, Doc. X-1637-08, 2008
9. S.H. Hashemi, Strength-Hardness Statistical Correlation in API, X65 Steel, Mater. Sci. Eng., A, 2011, 520, p 1648–165510.1016/j.msea.2010.10.089 ↗
10. ASTM, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International, A370-97, 1997
11. E.J. Pavlina and C.J.V. Tyne, Correlation of Yield Strength and Tensile Strength with Hardness for Steels, J. Mater. Eng. Perform., 2008, 17, p 888–89310.1007/s11665-008-9225-5 ↗
12. J.R. Cahoon, W.H. Broughton, and A.R. Kuzak, The Determination of Yield Strength from Hardness Measurements, Metall. Trans., 1986, 141–143, p 518–522
13. M.L. Zhu and F.Z. Xuan, Correlation Between Microhardness, Hardness and Strength in HAZ of Dissimilar Welds of Rotor Steels, Mater. Sci. Eng., A, 2010, 527, p 4035–404210.1016/j.msea.2010.03.066 ↗
14. M.T. Kirk and R.H. Dodds, J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens, J. Test. Eval., 1993, 21, p 1–12
15. Y. Itoh, “Study on Post-yield Brittle Fracture of Structural Steels and Welded Joints with A Crack,” Ph.D. Thesis, Osaka University, 1979
16. ASTM. Standard Test Method for Tensile Testing of Metallic Materials. ASTM, E8M-04, 2009
17. ASTM. Standard Test Method for Knoop and Vickers Hardness of Materials. ASTM, E384-11, 2012.
18. J.R. Cahoon, An Improved Equation Relating Hardness to Ultimate Strength, Metall. Trans., 1972, 3, p 304010.1007/BF02652880 ↗
19. N. Yurioka, The 54th Annual Assembly of the International Institute of Welding, IIW Doc. IX-2026-2002
20. H. Li, “A Study of Fatigue Crack Growth Rate of TC4-DT Titanium Alloy with Damage Tolerance,” MS Thesis, Northwestern Polytechnical University, 2006
21. L.E. Murr, E.V. Esquivel, S.A. Quinones, S.M. Gaytan, M.I. Lopez, E.Y. Martinez, F. Medina, D.H. Hernandez, E. Martinez, J.L. Martinez, S.W. Stafford, D.K. Brown, T. Hoppe, W. Meyers, U. Lindhe, and R.B. Wicker, Microstructures and Mechanical Properties of Electron Beam-Rapid Manufactured Ti-6Al-4V Biomedical Prototypes Compared to Wrought Ti-6Al-4V, Mater. Charact., 2009, 60, p 96–10510.1016/j.matchar.2008.07.006 ↗
22. W. Lu, Y.W. Shi, Y.P. Lei, and X.Y. Li, Effect of Electron Beam Welding on the Microstructures and Mechanical Properties of Thick TC4-DT Alloy, Mater. Des., 2012, 34, p 505–519
23. J.R. Rice and G.R. Rosengren, Plane Strain Deformation Near a Crack Tip in a Power-Law Hardening Materials, J. Mech. Phys. Solids, 1968, 16, p 1–1210.1016/0022-5096(68)90013-6 ↗