Characterization of Microstructural Changes During Annealing of Cold Worked Austenitic Stainless Steel Using Ultrasonic Velocity Measurements and Correlation with Mechanical Properties

A technique that is sensitive to change in texture is more reliable than mechanical property measurements for the study of recrystallization behavior in alloys where recrystallization is coupled with precipitation. Hence, ultrasonic velocity measurements have been employed to characterize microstructural changes during annealing of cold worked Ti-modified austenitic stainless steel where precipitation of TiC is known to retard recrystallization. Mechanical property measurements, such as strength and hardness, could not distinguish the recovery and recrystallization regimes, and it was difficult to determine the exact time or temperature for onset of recrystallization. The variation of velocity with annealing time or annealing temperature exhibited a three-stage behavior. The velocity exhibited a slight increase in the recovery region followed by a sharp and continuous decrease in the recrystallization region and reached saturation on completion of recrystallization. Based on the microstructural investigations, the three stages were identified to be recovery, progress of recrystallization, and completion of recrystallization. Velocity measurements could sense the onset, progress, and completion of recrystallization more accurately compared with that of hardness and strength measurements.