Preparation and Characterization of Nitinol Bone Staples for Cranio-Maxillofacial Surgery
Source abstract
Abstract
The aim of this work was to form NiTi and TiNiCo body temperature activated and superelastic staples for clinical joining of mandible and face bone fractures. The alloys were obtained by VIM technique. Hot and cold processing was applied to obtain wires of required diameters. The martensitic transformation was studied by DSC, XRD, and TEM. The shape memory effects were measured by a bend and free recovery ASTM F2082-06 test. The superelasticity was recorded in the tension stress-strain and by the three-point bending cycles in an instrument equipped with a Hottinger force transducer and LVDT. Excellent superelastic behavior of TiNiCo wires was obtained after cold working and annealing at 400-500 °C. The body temperature activated shape memory staples were applied for fixation of mandibular condyle fractures. In experiments on the skull models, fixation of the facial fractures by using shape memory and superelastic staples were compared. The superelastic staples were used in osteosynthesis of zygomatico-maxillo-orbital fractures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. T. Yoneyama and S. Miyazaki, Ed., Shape Memory Alloys for Biomedical Applications, Woodhead Publishing Limited, CRC Press LLC, Cambridge, 2009
2. S.M. Russell, Design Considerations for Nitinol Bone Staples, J. Mater. Eng. Perform., 2009, 18, p 831–83510.1007/s11665-009-9402-1 ↗
3. M.H. Wu, Fabrication of Nitinol Materials and Components, Proceedings of the International Conference on Shape Memory and Superelastic Technologies, Kuming, China, 2001, p 285–29210.4028/www.scientific.net/MSF.394-395.285 ↗
4. A.R. Pelton, D. Stockel, and T.W. Duerig, Medical Uses of Nitinol, Mater. Sci. Forum, 2000, 327–328, p 63–7010.4028/www.scientific.net/MSF.327-328.63 ↗
5. L.G. Machado and M.A. Savi, Medical Applications of Shape Memory Alloys, Braz. J. Med. Biol. Res., 2003, 36, p 683–69110.1590/S0100-879X2003000600001 ↗
6. D. Tarnita, D.N. Tarnita, N. Bizdoaca, I. Mindrila, and M. Vasilescu, Properties and Medical Application of Shape Memory Alloys, Rom. J. Morphol. Embryol., 2009, 50(1), p 15–21
7. S.A. Shabalovskaya, Surface Corrosion and Biocompatibiity Aspects of Nitinol as an Implant Material, Biomed. Mater. Eng., 2002, 12, p 69–109
8. M. Es-Souni, M. Es-Souni, and H. Fischer-Brandies, Assessing the Biocompatibility of NiTi Shape Memory Alloys Used for Medical Application, Anal. Bioanal. Chem., 2005, 381, p 557–56710.1007/s00216-004-2888-3 ↗
9. A.R. Pelton, J. DiCello, and S. Miyazaki, Optimization of Processing and Properties of Medical Grade Nitinol Wire, Min. Invas. Ther. Allied Technol., 2000, 9(1), p 107–11810.3109/13645700009063057 ↗
10. M.C. Carroll, Ch Somsen, and G. Eggeler, Multiple-step Martensitic Transformations in Ni-Rich NiTi Memory Alloys, Scripta Mater., 2004, 50, p 187–19210.1016/j.scriptamat.2003.09.020 ↗
11. P. Filip, J. Lausmma, J. Musialek, and K. Mazanec, Structure and Surface of NiTi Human Implants, Biomaterials, 2001, 22, p 2131–213810.1016/S0142-9612(00)00404-X ↗
12. D. Favier, Y. Liu, L. Orgeas, A. Sandel, L. Debove, and P. Comte-Gaz, Influence of Thermomechanical Processing on the Superelastic Properties of a Ni-Rich Nitinol Shape Memory Alloy, Mater. Sci. Eng., A, 2006, 429, p 130–13610.1016/j.msea.2006.05.018 ↗
13. J. Musialek, P. Filip, and J. Nieslanik, Titanium-Nickel Shape Memory Clamps in Small Bone Surgery, Arch. Orthop. Trauma Surg., 1998, 117, p 341–34410.1007/s004020050262 ↗
14. Z. Laster, A.D. MacBean, P.R. Ayliffe, and L.C. Nawlands, Fixation of a Frontozygomatic Fracture with a Shape-Memory Staple, Brit. J. Oral Maxillofac. Surg., 2001, 39, p 324–32510.1054/bjom.2001.0633 ↗
15. Z. Lekston, M. Jędrusik-Pawłowska, T. Cieślik, and J. Drugacz, Superelastic NiTi Staples for Fixation of Face Bone Fractures, Eng. Biomater., 2009, XII(89–91), p 42–46
16. J. Drugacz, Z. Lekston, H. Morawiec, and K. Januszewski, Use of TiNiCo Shape Memory Clamps in the Surgical Treatment of Mandibular Fractures, J. Oral Maxillofac. Surg., 1995, 53, p 665–70110.1016/0278-2391(95)90166-3 ↗
17. A. Fasching, D. Norwich, T. Geiser, and G.W. Paul, An Evaluation of a NiTiCo Alloy and Its Suitability for Medical Device Applications, J. Mater. Eng. Perform., 2011, 20, p 641–64510.1007/s11665-011-9845-z ↗
18. ASTM F2082-06, Standard Test Method for Determination Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery, Annual Book of Standards, ASTM International, Philadelphia, PA, 2006, p 1–7.
19. Z. Lekston and E. Łągiewka, X-ray Diffraction Studies of NiTi Shape Memory Alloys, Arch. Mater. Sci. Eng., 2007, 28(11), p 665–672
20. V.E. Naish, T.V. Novoselova, I.V. Sagaradze, and Z. Lekston, Theoretical and Experimental Study of the R Phase Structure in Ti50Ni48.7Co1.3 Alloy, Mater. Sci. Forum, 2000, 321–324, p 710–71510.4028/www.scientific.net/MSF.321-324.710 ↗
21. Z. Lekston, D. Stróż, and M. Jędrusik-Pawłowska, Structure and Properties of Cold-Worked and Annealed Ti-Ni-Co Shape Memory Wires Designed for Medical Application, Solid State Phenom., 2010, 163, p 118–12210.4028/www.scientific.net/SSP.163.118 ↗
22. D. Chrobak and D. Stróż, Two-Stage R Phase Transformation in a Cold-Rolled and Annealed Ti50.6at.%Ni Alloy, Scripta Mater., 2005, 52, p 757–76010.1016/j.scriptamat.2004.12.010 ↗
23. M. Kromka-Szydek, M. Jędrusik-Pawłowska, G. Milewski, Z. Lekston, T. Cieślik, and J. Drugacz, Numerical Analysis of Displacements of Mandible Bone Parts Using Various Elements for Fixation of Subcondylar Fractures, Acta Bioeng. Biomech., 2010, 12(1), p 12–18
24. M. Jędrusik-Pawłowska, Z. Lekston, M. Kromka-Szydek, J. Drugacz, and T. Cieślik, NiTi Shape Memory Staples as a Novel Surgical Fixation Method for Condylar Process Fractures, Eng. Biomater., 2008, 11(77–80), p 70–72