Hot Tearing Behavior of Cast Aluminum Alloys: Mechanisms, Assessment, and Strategies
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. W. Zhang and J. Xu, Advanced Lightweight Materials for Automobiles: A Review, Mater. Des., 2022, 221, p 110994. https://doi.org/10.1016/j.matdes.2022.11099410.1016/j.matdes.2022.110994 ↗
2. Y. Zhang, X. Lai, P. Zhu et al., Lightweight Design of Automobile Component using High Strength Steel Based on Dent Resistance, Mater. Des., 2006, 27(1), p 64–68. https://doi.org/10.1016/j.matdes.2004.09.01010.1016/j.matdes.2004.09.010 ↗
3. F. D’Elia, C. Ravindran, D. Sediako et al., Hot Tearing Mechanisms of B206 Aluminum–Copper Alloy, Mater. Des., 2014, 64, p 44–55. https://doi.org/10.1016/j.matdes.2014.07.02410.1016/j.matdes.2014.07.024 ↗
4. M. Li, H. Wang, Z. Zhu et al., Effects of Scraps and Yttrium on the As-Casting Microstructure, Hot Tearing and Solidification Characteristics of ZL205A Alloy, Rare Met. Mater. Eng., 2010, 39, p 5–10.
5. D.G. Eskin, Suyitno, and L. Katgerman, Mechanical Properties in the Semi-Solid State and Hot Tearing of Aluminium Alloys, Prog. Mater. Sci., 2004, 49(5), p 629–711. https://doi.org/10.1016/s0079-6425(03)00037-910.1016/s0079-6425(03)00037-9 ↗
6. S.L.D.A.K. Sadayappan, Hot Tearing in Cast Aluminum Alloys, Mater. Sci. Forum, 2011, 5, p 23–40. https://doi.org/10.1007/BF0335550510.1007/BF03355505 ↗
7. R. Xu, H. Zheng, F. Guo et al., A New Investigated Method on Hot Tearing behavior in Aluminum Alloys, Rus. J. Non-Ferr. Matals, 2013, 54(5), p 377–382. https://doi.org/10.3103/S106782121305009X10.3103/S106782121305009X ↗
8. M. Sistaninia, S. Terzi, A.B. Phillion et al., 3-D Granular Modeling and In Situ X-Ray Tomographic Imaging: A Comparative Study of Hot Tearing Formation and Semi-Solid Deformation in Al–Cu Alloys, Acta Mater., 2013, 61(10), p 3831–3841. https://doi.org/10.1016/j.actamat.2013.03.02110.1016/j.actamat.2013.03.021 ↗
9. Y. Li, H. Li, L. Katgerman et al., Recent Advances in hot Tearing during Casting of Aluminium Alloys, Prog. Mater. Sci., 2021 https://doi.org/10.1016/j.pmatsci.2020.10074110.1016/j.pmatsci.2020.100741 ↗
10. C. Yue, X. Yuan, M. Su et al., Effect of Adding Pr on the Microstructure and Hot Tearing Sensitivity of as-cast Al-Cu-Mg Alloys, Mater. Charac., 2022 https://doi.org/10.1016/j.matchar.2022.11214110.1016/j.matchar.2022.112141 ↗
11. P. Li, Y. Sui, Y. Jiang et al., Optimizing Hot Tearing Susceptibility of Al-5.5Zn-2.4 Mg-1.3Cu Alloys by Grain Refinement, Increasing Mold and Casting Temperature, Mater. Des., 2024, 246, p 113325. https://doi.org/10.1016/j.matdes.2024.11332510.1016/j.matdes.2024.113325 ↗
12. S. Bai, F. Wang, X. Du et al., Reduced Hot Tearing Susceptibility of Mg-4Zn-1.5Ca-xY-0.3Zr Alloy by Introducing Intergranular Bridging Secondary Phases, J. Alloys Comp, 2025, 1014, p 178663. https://doi.org/10.1016/j.jallcom.2025.17866310.1016/j.jallcom.2025.178663 ↗
13. M. Ghods, M. Lauer, R.N. Grugel et al., Convection and Macrosegregation in Al-19Cu Alloy Directionally Solidified Through an Abrupt Contraction in Cross-Section: A Comparison with Al-7Si, J. Cryst. Growth, 2017, 459, p 135–145. https://doi.org/10.1016/j.jcrysgro.2016.11.11110.1016/j.jcrysgro.2016.11.111 ↗
14. A. Abdollahi, M. Nganbe, and A.S. Kabir, Solidification Crack Elimination in TIG Welding of Al7075: Experimental Investigation and Modified RDG Modelling, J. Manuf. Process., 2023, 103, p 90–103. https://doi.org/10.1016/j.jmapro.2023.08.03810.1016/j.jmapro.2023.08.038 ↗
15. F. D’Elia, C. Ravindran, and D. Sediako, Interplay Among Solidification, Microstructure, Residual Strain and Hot Tearing in B206 Aluminium Alloy, Mater. Sci. Eng. A, 2015, 624, p 169–180. https://doi.org/10.1016/j.msea.2014.11.05710.1016/j.msea.2014.11.057 ↗
16. Z. Shi, W.J. Kim, F. Cao et al., Stress Corrosion Cracking of High-Strength AZ31 Processed by High-Ratio Differential Speed Rolling, J. Magnes. Alloys, 2015, 3(4), p 271–282. https://doi.org/10.1016/j.jma.2015.11.00610.1016/j.jma.2015.11.006 ↗
17. M. Sistaninia, A.B. Phillion, J.M. Drezet et al., A 3-D Coupled Hydromechanical Granular Model for Simulating the Constitutive Behavior of Metallic Alloys during Solidification, Acta Mater., 2012, 60(19), p 6793–6803. https://doi.org/10.1016/j.actamat.2012.08.05710.1016/j.actamat.2012.08.057 ↗
18. S. Vernède, J.A. Dantzig, and M. Rappaz, A Mesoscale Granular Model for the Mechanical Behavior of Alloys During Solidification, Acta Mater., 2009, 57(5), p 1554–1569. https://doi.org/10.1016/j.actamat.2008.12.00610.1016/j.actamat.2008.12.006 ↗
19. F. Liu, X. Zhu, and S. Ji, Effects of Ni on the Microstructure, Hot Tear and Mechanical Properties of Al–Zn–Mg–Cu Alloys under as-cast Condition, J. Alloys Compd., 2020 https://doi.org/10.1016/j.jallcom.2019.15345810.1016/j.jallcom.2019.153458 ↗
20. X. Yan and J.C. Lin, Prediction of Hot Tearing Tendency for Multicomponent Aluminum Alloys, Metall. Mater. Trans. B, Process Metall. Mater. Sci., 2006, 37(6), p 913–918. https://doi.org/10.1007/BF0273501310.1007/BF02735013 ↗
21. N. Sczygiol and Z. Domanski, Numerical evaluation of hot tearing in the solidifying casting, World congress on engineering and computer science, Vol 1, Wcecs, San Francisco, CA, 2011, p 7–12
22. M. Rappaz, J.M. Drezet, P.D. Grasso et al., Hot tearing and coalescence: two deeply-connected phenomena. In: 10th International conference on modeling of casting, welding and advanced solidification processes. (Destin, Fl: Minerals, Metals & Materials Soc, 2003)
23. E.BLa.A.V. Zharikov, Study of Intergranular Films and Interstitial Phases in Geomaterials using High Temperature Centrifuge and Ultrasonic Method at High Pressure, Phys. Chem. Earth Part A., 2000, 25(2), p 209–214. https://doi.org/10.1016/S1464-1895(00)00033-810.1016/S1464-1895(00)00033-8 ↗
24. D.G. Eskin and L. Katgerman, A Quest for a New Hot Tearing Criterion, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, 38(7), p 1511–1519. https://doi.org/10.1007/s11661-007-9169-710.1007/s11661-007-9169-7 ↗
25. D.G. Eskin, J. Suyitno, F. Mooney et al., Contraction of Aluminum Alloys during and After Solidification, Metall. Mater. Trans. A, 2004, 35A(4), p 1325–1335. https://doi.org/10.1007/s11661-004-0307-110.1007/s11661-004-0307-1 ↗
26. T.W. Clyne, M. Wolf, and W. Kurz, The Effect of Melt Composition on Solidification Cracking of Steel, with Particular Reference to Continuous Casting, Metall. Trans. B, 1982, 13, p 259–266. https://doi.org/10.1007/BF0266458310.1007/BF02664583 ↗
27. E. Niyama, A method of shrinkage prediction and its application to steel casting practice. In: 49th International Foundry Congress (1982)
28. J. Campbell, Evidence for Entrainment Defects, Mater. Sci. Technol., 2008, 24(7), p 875–879. https://doi.org/10.1179/174328408X30713910.1179/174328408X307139 ↗
29. T.W. Clyne and G.J. Davies, Volume Contractions Accompanying Solidification of Aluminium: Copper Alloys, Met. Sci., 1978, 12(5), p 233–238. https://doi.org/10.1179/msc.1978.12.5.23310.1179/msc.1978.12.5.233 ↗
30. S.A. Metz, M.C. Flemings, A fundamental study of hot tearing, in Merton C Flemings Symposium on Solidification and Materials Processing (Cambridge, 2001), pp. 181–188
31. M. Bruna, Hot tearing evaluation for aluminium alloys. In: Application of experimental and numerical methods in fluid mechanics and energy. XX Anniversary of International Science Conference (Terchova, Slovakia, 2016)
32. Y. Lu, L.N. Bartlett, and R.J. O’Malley, A Review on Hot Tearing of Steels, Int. J. Metalcast., 2022, 16(1), p 45–61. https://doi.org/10.1007/s40962-021-00599-310.1007/s40962-021-00599-3 ↗
33. J. Langlais, J.E. Gruzleski, A novel approach to assessing the hot tearing susceptibility of aluminum alloys. In International symposium on light metals at the CIM 38th annual conference of metallurgists (Quebec City, Canada, 1999), pp. 247–263
34. V. Khalajzadeh, K.D. Carlson, D.G. Backman et al., A Pore-Centric Model for Combined Shrinkage and Gas Porosity in Alloy Solidification, Metall. Mater. Trans. A, 2017 https://doi.org/10.1007/s11661-016-3940-610.1007/s11661-016-3940-6 ↗
35. R. Mehrabian, M. Keane, and M. Flemings, Interdendritic Fluid Flow and Macrosegregation; Influence of Gravity, Metall. Mater. Trans. B Process Metall. Mater. Process. Sci., 1970, 1, p 1209–1220.
36. V.M.L. Dosil, R.C. Martinez, R.M.S. Fernandez et al., Allergic Contact Dermatitis due to Manganese in an Aluminium Alloy, Contact Dermat., 2006, 54(1), p 67–68. https://doi.org/10.1111/j.0105-1873.2006.0729i.x10.1111/j.0105-1873.2006.0729i.x ↗
37. G.K. Sigworth and F. Dehart, Recent Developments in the High Strength Aluminum-Copper Casting Alloy A206, AFS Trans, 2003, 11(1), p 341–354.
38. M.P. Harmer, Hot pressing: technology and theory, Pergamon, Oxford, 1991.
39. E.W. Skinner, Casting Technics for Small Castings, Dent. Clin. North Am., 1965, 23, p 225–239.10.1016/S0011-8532(22)01713-X ↗
40. K. Ellingsen, Q. Du, M. M’Hamdi et al., Experimental study and numerical analysis of cracking during DC casting of large dimension 7075 aluminium billets. In Light metals symposium at the 147th annual TMS meeting and exhibition (Phoenix, AZ, 2018) pp. 895–90010.1007/978-3-319-72284-9_116 ↗
41. L. Sweet, J.A. Taylor, M.J. Couper et al., Hot Tearing in Al-Mg-Si Alloys with Minor Additions of Cu or Mn, Mater. Sci. Forum, 2011, 693, p 217–223. https://doi.org/10.4028/www.scientific.net/MSF.693.21710.4028/www.scientific.net/MSF.693.217 ↗
42. H. Meidani and A. Jacot, Phase-Field Simulation of Micropores Constrained by the Dendritic Network During Solidification, Acta Mater., 2011, 59(8), p 3032–3040. https://doi.org/10.1016/j.actamat.2011.01.04310.1016/j.actamat.2011.01.043 ↗
43. I.I. Novikov, Hot shortness of nonferrous metals and alloys, Nauka, Moscow, 1966.
44. D. Warrington and D.G. McCartney, Development of a New Hot-Cracking Test for Aluminium Alloys, Cast Metals, 2016, 2(3), p 134–143. https://doi.org/10.1080/09534962.1989.1181899410.1080/09534962.1989.11818994 ↗
45. D. Warrington and D.G. McCartney, Hot-Cracking in Aluminium Alloys 7050 and 7010: A Comparative Study, Cast Metals, 2016, 3(4), p 202–208. https://doi.org/10.1080/09534962.1990.1181904010.1080/09534962.1990.11819040 ↗
46. J.M. Drezet, B. Mireux, G. Kurtuldu et al., Measurement of Mechanical Coherency Temperature and Solid Volume Fraction in Al-Zn Alloys Using In Situ X-Ray Diffraction During Casting, Metall. Mater. Trans. A, 2015 https://doi.org/10.1007/s11661-015-3041-y10.1007/s11661-015-3041-y ↗
47. J.M. Drezet, B. Mireux, Z. Szaraz et al., In Situ Neutron Diffraction During Casting: Determination of Rigidity Point in Grain Refined Al-Cu Alloys, Materials, 2014, 7(2), p 1165–1172. https://doi.org/10.3390/ma702116510.3390/ma7021165 ↗
48. I.I. Novikov and O.E. Grushko, Hot Cracking Susceptibility of Al–Cu–Li and Al–Cu–Li–Mn Alloys, Mater. Sci. Technol., 1995 https://doi.org/10.1179/mst.1995.11.9.92610.1179/mst.1995.11.9.926 ↗
49. H. Akhyar, V. Malau et al., Hot Tearing Susceptibility of Aluminum Alloys using CRCM-Horizontal Mold, Results Phys., 2017, 7, p 1030–1039. https://doi.org/10.1016/j.rinp.2017.02.04110.1016/j.rinp.2017.02.041 ↗
50. L. Li, R. Zhang, Q. Yuan et al., An Integrated Approach to Study the Hot Tearing Behavior by Coupling the Microscale Phase Field Model and Macroscale Casting Simulations, J. Mater. Process. Technol., 2022, 310, 117782. https://doi.org/10.1016/j.jmatprotec.2022.11778210.1016/j.jmatprotec.2022.117782 ↗
51. S. Liu, Z. Wei, Z. Liu et al., Effect of Zn Content on Hot Tearing Susceptibility of LPSO Enhanced Mg–Znx–Y2–Zr0.06 Alloys with Different Initial Mold Temperatures, J. Alloys Compd., 2022, 904, 163963. https://doi.org/10.1016/j.jallcom.2022.16396310.1016/j.jallcom.2022.163963 ↗
52. J. Huang, Z. Zhang, C. Yang et al., Effect of AlN Reinforcement Particles on Hot-Tearing Susceptibility of AlN/AZ91D Composites, Mater. Today Commun., 2023 https://doi.org/10.1016/j.mtcomm.2022.10522510.1016/j.mtcomm.2022.105225 ↗
53. B. Clyne and G. Davies, A Quantitative Solidification Cracking Test for Castings and an Evaluation of Cracking in Aluminium--Magnesium Alloys, Br. Foundrym., 1975, 68, p 238–244.
54. D. Viano, D. Stjohn, J. Grandfield et al., Hot tearing in aluminium: copper alloys, Vol 3 John Wiley & Sons Ltd, US, 2013.
55. K. Rajagukguk, S. Suyitno, H. Saptoadi et al., Evaluation of Horizontal and Vertical Constrained Rod Casting Mold on Hot Tearing Susceptibility of Al-Cu Alloys, Int. J. Metalcast., 2024, 18(4), p 3329–3341. https://doi.org/10.1007/s40962-023-01250-z10.1007/s40962-023-01250-z ↗
56. H. Liao, B. Zhao, X. Suo et al., Prediction Models for Macro Shrinkage of Aluminum Alloys based on Machine Learning Algorithms, Mater. Today Commun., 2019, 21, p 100715. https://doi.org/10.1016/j.mtcomm.2019.10071510.1016/j.mtcomm.2019.100715 ↗
57. M. Dhisale, J. Vasavada, and A. Tewari, An Approach to Optimize Cooling Channel Parameters of Low Pressure Die Casting Process for Reducing Shrinkage Porosity in Aluminium Alloy Wheels, Mater. Today Proc., 2022, 62, p 3189–3196. https://doi.org/10.1016/j.matpr.2022.03.47810.1016/j.matpr.2022.03.478 ↗
58. C. Davidson, D. Viano, L. Lu et al., Observation of Crack Initiation During Hot Tearing, Int. J. Cast Metals Res., 2013, 19(1), p 59–65. https://doi.org/10.1179/13640460622502329110.1179/136404606225023291 ↗
59. Y. Guo, L. Zhang, G. Wu et al., Influence of Cu Addition on Hot Tearing Susceptibility and Fluidity of Al-Li-Cu Alloys: Experimental Investigation, Criterion Prediction and Simulation Assessment, J. Alloys Comp., 2023 https://doi.org/10.1016/j.jallcom.2023.17230110.1016/j.jallcom.2023.172301 ↗
60. G. Cao and S. Kou, Hot Cracking of Binary Mg–Al Alloy Castings, Mater. Sci. Eng. A, 2006, 417(1–2), p 230–238. https://doi.org/10.1016/j.msea.2005.10.05010.1016/j.msea.2005.10.050 ↗
61. Y. Guo, F. Qi, L. Zhang et al., Achieving Low Hot Tearing Susceptibility in High-Strength Cast Al–Li Alloys: Experimental Investigation and Simulation Assessment, Mater. Sci. Eng. A, 2024 https://doi.org/10.1016/j.msea.2024.14690110.1016/j.msea.2024.146901 ↗
62. L. Zhang, D.G. Eskin, M. Lalpoor et al., Factors Affecting Thermal Contraction Behavior of an AA7050 Alloy, Mater. Sci. Eng. A, 2010, 527(13–14), p 3264–3270. https://doi.org/10.1016/j.msea.2010.02.00510.1016/j.msea.2010.02.005 ↗
63. X. Du, F. Wang, Z. Wang et al., Effect of Ca/Al Ratio on Hot Tearing Susceptibility of Mg–Al–Ca Alloy, J. Alloys Comp., 2022 https://doi.org/10.1016/j.jallcom.2022.16511310.1016/j.jallcom.2022.165113 ↗
64. A. Hamadellah, A. Bouayad, and C. Gerometta, Hot Tear Characterization of AlCu5MgTi and AlSi9 Casting Alloys using an Instrumented Constrained Six Rods Casting Method, J. Mater. Process. Technol., 2017, 244, p 282–288. https://doi.org/10.1016/j.jmatprotec.2017.01.03010.1016/j.jmatprotec.2017.01.030 ↗
65. Y. Zhou, P. Mao, Z. Wang et al., Experimental Investigation and Simulation Assessment on Fluidity and Hot Tearing of Mg-Zn-Cu System Alloys, J. Mater. Process. Technol., 2021 https://doi.org/10.1016/j.jmatprotec.2021.11725910.1016/j.jmatprotec.2021.117259 ↗
66. B. Li, J. Zhang, F. Ye, R. Tang, Q. Dong, and J. Chen, An Approach to Studying the Hot Tearing Mechanism of Alloying Elements in Ternary Mg-Zn-Al Alloys, J. Mater. Process. Technol., 2023, 317, p 117980. https://doi.org/10.1016/j.jmatprotec.2023.11798010.1016/j.jmatprotec.2023.117980 ↗
67. Q. Wu, Study of hot tearing in cast and wrought aluminum alloys (Masters Theses, 2012)
68. D. Eskine, J. Zuidema, and L. Katgerman, Linear Solidification Contraction of Binary and Commercial Aluminium Alloys, Int. J. Cast Met. Res., 2016, 14(4), p 217–223. https://doi.org/10.1080/13640461.2002.1181944010.1080/13640461.2002.11819440 ↗
69. Z. Lin, Yu. Zhao, L. Li et al., A Hot Tearing Propagation Model for Steel, J. Mater. Process. Technol., 2024 https://doi.org/10.1016/j.jmatprotec.2023.11827310.1016/j.jmatprotec.2023.118273 ↗
70. A.B. Phillion, R.W. Hamilton, D. Fuloria et al., In Situ X-Ray Observation of Semi-Solid Deformation and Failure in Al–Cu Alloys, Acta Mater., 2011, 59(4), p 1436–1444. https://doi.org/10.1016/j.actamat.2010.11.00510.1016/j.actamat.2010.11.005 ↗
71. D.G. Sediako and W. Kasprzak, Study of Microstructure Evolution in Solidification of Hypereutectic Al-Si Alloys with Application of Thermal Analysis and Neutron Diffraction, Metall. Mater. Trans. A, 2015, 46A(9), p 4160–4173. https://doi.org/10.1007/s11661-015-3007-010.1007/s11661-015-3007-0 ↗
72. E. Vandersluis, A. Elsayed, F. D’Elia et al., Crystalline-Phase Solidification Analysis Using In Situ Neutron Diffraction, Trans. Indian Inst. Metals, 2018, 71(11), p 2777–2781. https://doi.org/10.1007/s12666-018-1418-510.1007/s12666-018-1418-5 ↗
73. V.A. Nguyen, D.H. Le, D. Damian et al., In-Situ” x-Ray Imaging Technology for Material and Manufacturing Science: A Review, J. Manuf. Process., 2025, 141, p 1245–1295. https://doi.org/10.1016/j.jmapro.2025.03.04910.1016/j.jmapro.2025.03.049 ↗
74. C. Puncreobutr, P.D. Lee, R.W. Hamilton et al., Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys, JOM, 2012, 64(1), p 89–95. https://doi.org/10.1007/s11837-011-0217-910.1007/s11837-011-0217-9 ↗
75. M. Suéry, S. Terzi, B. Mireux et al., Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys, JOM, 2012, 64(1), p 83–88. https://doi.org/10.1007/s11837-011-0219-710.1007/s11837-011-0219-7 ↗
76. S. Terzi, L. Salvo, M. Suery et al., In Situ X-Ray Tomography Observation of Inhomogeneous Deformation in Semi-Solid Aluminium Alloys, Scr. Mater., 2009, 61(5), p 449–452. https://doi.org/10.1016/j.scriptamat.2009.04.04110.1016/j.scriptamat.2009.04.041 ↗
77. C. Puncreobutr, P.D. Lee, R.W. Hamilton et al., Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification, Metall. Mater. Trans. A, 2013, 44(12), p 5389–5395. https://doi.org/10.1007/s11661-012-1563-010.1007/s11661-012-1563-0 ↗
78. I. Han, S. Feng, F. Wilde et al., Revealing Hot Tear Formation Dynamics in Al–Cu Alloys with X-ray Radiography, Acta Mater., 2024, 262, 119421. https://doi.org/10.1016/j.actamat.2023.11942110.1016/j.actamat.2023.119421 ↗
79. R. Daudin, S. Terzi, P. Lhuissier et al., Particle-Induced Morphological Modification of Al Alloy Equiaxed Dendrites Revealed by Sub-Second In Situ Microtomography, Acta Mater., 2017, 125, p 303–310. https://doi.org/10.1016/j.actamat.2016.12.00510.1016/j.actamat.2016.12.005 ↗
80. D.G.E. Suyitno, V.I. Savran, and L. Katgerman, Effects of Alloy Composition and Casting Speed on Structure Formation and Hot Tearing during Direct-Chill Casting of Al-Cu Alloys, Metall. Mater. Trans. A, 1982, 35A(11), p 3551–3561. https://doi.org/10.1007/s11661-004-0192-710.1007/s11661-004-0192-7 ↗
81. S.A. Kou, Criterion for Cracking during Solidification, Acta Mater., 2015, 88, p 366–374. https://doi.org/10.1016/j.actamat.2015.01.03410.1016/j.actamat.2015.01.034 ↗
82. W.M. van Haaften, W.H. Kool, and L. Katgerman, Hot Tearing Studies in AA5182, J. Mater. Eng. Perform., 2002, 11(5), p 537–543. https://doi.org/10.1361/10599490277034379110.1361/105994902770343791 ↗
83. I.I. Novikov, Hot-shortness of nonferrous metals and alloys (1968)
84. C. Yue, B. Zheng, M. Su et al., Effect of Cu/Mg Ratio on the Intermetallic Compound and Hot Tearing Susceptibility of Al-Cu-Mg Alloys, Int. J. Metalcast., 2024, 18(1), p 417–430. https://doi.org/10.1007/s40962-023-01033-610.1007/s40962-023-01033-6 ↗
85. M. Su, M. Zhou, C. Yue et al., Investigation on the Influence Mechanism of Mg Contents on the Hot Cracking Behavior of Al–Cu–Mg Alloys, Metall. and Mater. Trans. B., 2024, 56(1), p 355–374. https://doi.org/10.1007/s11663-024-03280-210.1007/s11663-024-03280-2 ↗
86. J.-q Han, J.-s Wang, M.-s Zhang et al., Relationship between Amounts of Low-Melting-Point Eutectics and Hot Tearing Susceptibility of Ternary Al−Cu−Mg Alloys during Solidification, Trans. Nonferrous Met. Soc. China, 2020, 30(9), p 2311–2325. https://doi.org/10.1016/S1003-6326(20)65381-X10.1016/S1003-6326(20)65381-X ↗
87. Y. Guo, L. Zhang, G. Wu et al., Effect of Li Content on Hot-Tearing Susceptibility of Ternary Al-Cu-Li Alloys: Experimental Investigation, Criterion Prediction, and Simulation Assessment, Metall. Mater. Trans. A, 2023, 54(12), p 4850–4867. https://doi.org/10.1007/s11661-023-07207-510.1007/s11661-023-07207-5 ↗
88. C. Tao, H. Huang, X. Yuan et al., Effect of Y Element on Microstructure and Hot Tearing Sensitivity of As-Cast Al–4.4Cu–1.5Mg–0.15Zr Alloy, Int. J. Metalcast., 2021, 16(2), p 1010–1019. https://doi.org/10.1007/s40962-021-00666-910.1007/s40962-021-00666-9 ↗
89. K. Ganjehfard, R. Taghiabadi, M.T. Noghani et al., Tensile Properties and Hot Tearing Susceptibility of Cast Al-Cu Alloys Containing Excess Fe and Si, Int. J. Minerals, Metall. Mater., 2021, 28(4), p 718–728. https://doi.org/10.1007/s12613-020-2039-710.1007/s12613-020-2039-7 ↗
90. Z. Su, C. Jin, Z. Zeng et al., Simultaneous Improvement of Mechanical and Castability Properties of Al-Cu-Mn based Alloys by Ca/Ni Micro-Alloying, J. Alloy. Compd., 2024 https://doi.org/10.1016/j.jallcom.2024.17482410.1016/j.jallcom.2024.174824 ↗
91. M. Zou, Z. Ge, L. Qi et al., Effect of Erbium (Er) on the Hot Cracking Behaviour of Al-5Cu Alloy, Mater. Sci. Technol., 2022, 38(17), p 1501–1509. https://doi.org/10.1080/02670836.2022.208816010.1080/02670836.2022.2088160 ↗
92. J. Liu and S. Kou, Susceptibility of Ternary Aluminum Alloys to Cracking During Solidification, Acta Mater., 2017, 125, p 513–523. https://doi.org/10.1016/j.actamat.2016.12.02810.1016/j.actamat.2016.12.028 ↗
93. Y. Wang, Y. Guo, D. Zhao et al., Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy, J. Alloys Compd., 2024 https://doi.org/10.1016/j.jallcom.2024.17553910.1016/j.jallcom.2024.175539 ↗
94. X. Du, L. Zhou, Z. Xu et al., Effects of Mg/Si Ratio on Hot Tearing Susceptibility of Al–xMg–(3–x)Si Alloys, Int. J. Metalcast., 2025 https://doi.org/10.1007/s40962-025-01637-010.1007/s40962-025-01637-0 ↗
95. A.W. Shah, S.-H. Ha, B.-H. Kim et al., Effect of Compositional Variation on the Microstructural Evolution and the Castability of Al–Mg–Si Ternary Alloys, Metall. Mater. Trans. A, 2021, 52(8), p 3353–3365. https://doi.org/10.1007/s11661-021-06306-510.1007/s11661-021-06306-5 ↗
96. B. Hu, D. Li, Z. Li et al., Hot Tearing Behavior in Double Ternary Eutectic Alloy System: Al-Mg-Si Alloys, Metall. Mater. Trans. A, 2021, 52(2), p 789–805. https://doi.org/10.1007/s11661-020-06101-810.1007/s11661-020-06101-8 ↗
97. S. Farahany, N.A. Nordin, and H. Ghandvar, Cooling Curve Thermal Analysis of Al–Mg2Si–Cu–xSr Composite, J. Therm. Anal. Calorim., 2019, 141(3), p 1109–1122. https://doi.org/10.1007/s10973-019-09100-z10.1007/s10973-019-09100-z ↗
98. B. Yang, J. Wu, Y. Zeng et al., Hot Tear Formation during the Casting of Al-Zn Binary Alloys, Adv. Eng. Mater., 2024 https://doi.org/10.1002/adem.20230147110.1002/adem.202301471 ↗
99. J.A. Spittle and S.G.R. Brown, Numerical Modelling of Permeability Variation with Composition in Aluminium Alloy Systems and its Relationship to Hot Tearing Susceptibility, Mater. Sci. Technol., 2005 https://doi.org/10.1179/174328405x5183910.1179/174328405x51839 ↗
100. R. Rana, W. Bleck, S.B. Singh et al., Hot Shortness Behavior of a Copper-Alloyed High Strength Interstitial Free Steel, Mater. Sci. Eng. A, 2013, 588, p 288–298. https://doi.org/10.1016/j.msea.2013.09.04110.1016/j.msea.2013.09.041 ↗