Development of Multifunctional Materials from Boron-Modified Bamboo Waste/Bio-Based Polyurethane Adhesive Composites

1. D. Thapliyal, S. Verma, P. Sen, R. Kumar, and A. Thakur, Natural Fibers Composites: Origin, Importance, Consumption, J. Compos. Sci., 2023, 7(506), p 1–44.

2. W. Chailad, W. Ariyawiriyanan, S. Pavasupree, N. Sosa, Y. Wongnongwa, J. Yuennan, E. Martwong, S.I.N. Ayutthaya, L. Yang, and N. Sukhawipat, Elastomeric Dielectric Materials from Natural Rubber/Copper-Modified Coconut-Shell-Derived Activated Carbon Composite: Combined Experimental and Density Functional Theory Study, Ind. Crops Prod., 2025, 234, 121511.10.1016/j.indcrop.2025.121511 ↗

3. N. Sukhawipat, L. Saengdee, and P. Pasetto, Caesalpinia Sappan L. Wood Fiber: Bio-Reinforcement for Polybutylene Succinate-Based Biocomposite Film, Cellulose, 2022, 29(6), p 3375–3387. https://doi.org/10.1007/s10570-022-04479-910.1007/s10570-022-04479-9 ↗

4. L. Long, Y. Minghui, Y. Wenjing, D. Yulong, and L. Shuyan, Research Advance in Growth and Development of Bamboo Organs, Ind. Crops Prod., 2023, 205, 117428.10.1016/j.indcrop.2023.117428 ↗

5. S. Canavan, D.M. Richardson, V. Visser, J.J. Le Roux, M.S. Vorontsova, and J.R.U. Wilson, The Global Distribution of Bamboos: Assessing Correlates of Introduction and Invasion, AoB Plants, 2017, 9(1), p 1–18.

6. P. Tangphadungrat, C. Hansapinyo, C. Buachart, T. Suwan, and S. Limkatanyu, Analysis of Non-destructive Indicating Properties for Predicting Compressive Strengths of Dendrocalamus sericeus Munro Bamboo Culms, Materials, 2023. https://doi.org/10.3390/ma1604135210.3390/ma16041352 ↗

7. X. Chen, X. Wang, X. Luo, L. Chen, Y. Li, J. Xu, Z. Liu, C. Dai, H. Miao, and H. Liu, Bamboo as a Naturally-Optimized Fiber-Reinforced Composite: Interfacial Mechanical Properties and Failure Mechanisms, Compos. Part B Eng., 2024. https://doi.org/10.1016/j.compositesb.2024.11145810.1016/j.compositesb.2024.111458 ↗

8. V. Laemlaksakul and S. Kaewkuekool, Laminated Bamboo Materials for Furniture-A Systematic Approach to Innovative Product Design, WSEAS Trans. Adv. Eng. Educ. 2006, p 424.

9. W. Sun, Y. Sun, X. Hong, Y. Zhang, and C. Liu, Research on Biomass Waste Utilization Based on Pollution Reduction and Carbon Sequestration, Sustainability, 2023. https://doi.org/10.3390/su1505453510.3390/su15054535 ↗

10. A. Pizzi, Phenolic Resin Adhesives, Handbook of Adhesive Technology, Third Edition, Chapter 8, 2017, p 223.

11. S.M. Alaa-Eldein, M. Abdelsabour-Khalaf, E.A. Hafez, and S. soliman, Effect of Exposure to Formalin on the Histochemical Structure of Respiratory Organs in Mice, SVU-Int. J. Vet. Sci., 2022, 5(2), p 91–105.

12. A. Tenorio-Alfonso, M.C. Sánchez, and J.M. Franco, A review of the Sustainable Approaches in the Production of Bio-based Polyurethanes and Their Applications in the Adhesive Field, J. Polym. Environ., 2020. https://doi.org/10.1007/s10924-020-01659-110.1007/s10924-020-01659-1 ↗

13. H. Sardon, D. Mecerreyes, A. Basterretxea, L. Avérous, and C. Jehanno, From Lab to Market: Current Strategies for the Production of Biobased Polyols, ACS Sustain. Chem. Eng., 2021, 9(32), p 10664–10677.10.1021/acssuschemeng.1c02361 ↗

14. N. Sukhawipat, T. Kongprabat, N. Uthaipan, A. Saetung, and N. Saetung, A New Green Rigid Polyurethane Foam Based on Modified Palm Oil: Preliminary Study of Their Potential for Marine Buoy Applications, J. Appl. Polym. Sci., 2025, 142(6), e56477.10.1002/app.56477 ↗

15. D. Riyapan, A. Saetung, and N. Saetung, A Novel Rigid PU Foam Based on Modified Used Palm Oil as Sound Absorbing Material, J. Polym. Environ., 2019, 27(8), p 1693–1708.10.1007/s10924-019-01460-9 ↗

16. A. Suwan, N. Sukhawipat, N. Uthaipan, A. Saetung, and N. Saetung, Some Properties of Experimental Particleboard Manufactured from Waste Bamboo Using Modified Recycled Palm Oil as Adhesive, Prog. Org. Coat., 2020, 149, 105899.10.1016/j.porgcoat.2020.105899 ↗

17. N. Sukhawipat, L. Saengdee, P. Pasetto, J. Junthip, and E. Martwong, Sustainable Rigid Polyurethane Foam from Wasted Palm Oil and Water Hyacinth Fiber Composite—A Green Sound-Absorbing Material, Polymers, 2022, 14, p 201.10.3390/polym14010201 ↗

18. C.S. Osorio-González, N. Gómez-Falcon, F. Sandoval-Salas, R. Saini, S.K. Brar, and A.A. Ramírez, Production of Biodiesel from Castor Oil: A Review, Energies, 2020, 13(10), p 1–22.10.3390/en13102467 ↗

19. U. Šebenik and M. Krajnc, Influence of the Soft Segment Length and Content on the Synthesis and Properties of Isocyanate-Terminated Urethane Prepolymers, Int. J. Adhes. Adhes., 2007, 27(7), p 527–535.10.1016/j.ijadhadh.2006.10.001 ↗

20. V. Laemlaksakul, P. Thusanaphoom, and S. Srijunruk, Sustainable Particle Board from Chopstick Waste Bamboo and Castor Oil-Based Polyurethane Composite: Effects of NCO Index on Structural, Flammability, Acoustic, and Thermal Insulation Properties for Engineering Application, J. Adhes. Sci. Technol., 2025, 0(0), p 1–23.10.1080/01694243.2025.2579031 ↗

21. C.R. Pereira, R.E. Mölleken, F.H. de Souza, G.S. Capellari, S.C. Neto, and E.C. Azevedo, Evaluation of MDF Bonding with Polyurethane of Castor Oil, Appl. Adhes. Sci., 2016. https://doi.org/10.1186/s40563-016-0070-810.1186/s40563-016-0070-8 ↗

22. Y.C. Chen and W. Tai, Castor Oil-Based Polyurethane Resin for Low-Density Composites with Bamboo Charcoal, Polymers, 2018. https://doi.org/10.3390/polym1010110010.3390/polym10101100 ↗

23. Y.H. Chen, C.H. Wu, and Y.C. Chen, Optimized Condition for Eco-friendly Wood Composites Manufactured from Castor Oil-Based Polyurethane, Constr. Build. Mater., 2021, 306, 124789.10.1016/j.conbuildmat.2021.124789 ↗

24. M.L. Chaudhary, P. Patel, R. Patel, and R.K. Gupta, Castor Oil-Based Polyurethane Adhesives: Effect of Cross-Linker on the Bond Strength, Mater. Today Commun., 2024, 39, 109172.10.1016/j.mtcomm.2024.109172 ↗

25. P. Sowa, J. Rutkowska-Talipska, U. Sulkowska, K. Rutkowski, and R. Rutkowski, Ionizing and Non-ionizing Electromagnetic Radiation in Modern Medicine, Pol. Ann. Med., 2012, 19(2), p 134–138.10.1016/j.poamed.2012.07.001 ↗

26. M.M. Murshed, C.B. Mendive, M. Curti, G. Nénert, P.E. Kalita, K. Lipinska, A.L. Cornelius, A. Huq, and T.M. Gesing, Anisotropic Lattice Thermal Expansion of PbFeBO4: A Study by X-ray and Neutron Diffraction, Raman Spectroscopy and DFT Calculations, Mater. Res. Bull., 2014, 59, p 170–178. https://doi.org/10.1016/j.materresbull.2014.07.00510.1016/j.materresbull.2014.07.005 ↗

27. S. Al-Obaidia, H. Akyıldırım, K. Gunoglu, and I. Akkurt, Neutron Shielding Calculation for Barite-Boron-Water, Acta Phys. Pol. A, 2020, 137(4), p 551–553.10.12693/APhysPolA.137.551 ↗

28. M.G. El-Samrah, M.A.E. Abdel-Rahman, and A.M.I. Kany, Study Characteristics of New Concrete Mixes and Their Mechanical, Physical, and Gamma Radiation Attenuation Features, Z. Anorg. Allg. Chem., 2018, 644(2), p 92–99.10.1002/zaac.201700420 ↗

29. D.A. Aloraini and A. Saeed, Thermal Neutrons-Gamma Rays Dual-Function Glass Shield of Boron-Tungsten-Reinforced Borosilicate Glass, Mater. Res. Bull., 2025, 192, 113606. https://doi.org/10.1016/j.materresbull.2025.11360610.1016/j.materresbull.2025.113606 ↗

30. G.L. Squires, Introduction to the Theory of Thermal Neutron Scattering, Courier Corporation, New York, 1996.

31. Y. Elmahroug and C. Souga, Calculation of Gamma and Neutron Shielding Parameters for Some Materials Polyethylene-Based, Int. J. Phys. Res., 2013, 3, p 33–40.

32. İ Demir, M. Gümüş and H.S. Gökçe, Gamma Ray and Neutron Shielding Characteristics of Polypropylene Fiber-Reinforced Heavyweight Concrete Exposed to High Temperatures, Constr. Build. Mater., 2020, 257, p 119596.10.1016/j.conbuildmat.2020.119596 ↗

33. M.N.M. Baharuddin, N.M. Zain, W.S.W. Harun, E.N. Roslin, F.A. Ghazali, and S.N.M. Som, Development and Performance of Particleboard from Various Types of Organic Waste and Adhesives: A Review, Int. J. Adhes. Adhes., 2023, 124, 103378.10.1016/j.ijadhadh.2023.103378 ↗

34. G. Poggi, H.D. Santan, J. Smets, D. Chelazzi, D. Noferini, M.L. Petruzzellis, L. Pensabene Buemi, E. Fratini, and P. Baglioni, Nanostructured Bio-Based Castor Oil Organogels for the Cleaning of Artworks, J. Colloid Interface Sci., 2023, 638, p 363–374.10.1016/j.jcis.2023.01.119 ↗

35. M. Basar, M.I. Khan, M.F. Akhtar, F. Anwar, A. Saleem, A. Madni, Z. Ahmad, A. Sharif, B. Akhtar, U. Shakoor, and A. Khan, Olive Oil and Castor Oil-Based Self-Nanoemulsifying Drug Delivery System of Flurbiprofen Can Relieve Peripheral Pain and Inflammation Through Reduction of Oxidative Stress and Inflammatory Biomarkers: A Comprehensive Formulation and Pharmacological Insigh, Inflammopharmacology, 2025, 33(1), p 353–379.10.1007/s10787-024-01632-7 ↗

36. P. Thusanaphoom, K. Pokamas, T. Yingshataporn-a-nan, T. Panyachan, N. Parneam, S.I.N. Ayutthaya, N. Sosa, and N. Sukhawipat, Viscosity and Chemical Properties of Recycled PET-Based Polyol: Effects of Zinc Acetate Dihydrate Catalyst Concentration on Glycolysis Depolymerization, J. Taiwan Inst. Chem. Eng., 2026, 179(October 2025), p 106449.10.1016/j.jtice.2025.106449 ↗

37. G. Çayli, S. Cekli, and C.P. Uzunoğlu, Synthesis, Photopolymerization and Evaluation of Electrical Properties of Epoxidized Castor Oil-Based Acrylates, Polym. Bull., 2024, 81(14), p 13289–13304.10.1007/s00289-024-05349-z ↗

38. H. Li, S. Niu, and C. Lu, Pyrolysis Characteristics of Castor Oil through Thermogravimetric Coupled with Fourier Transform Infrared Spectroscopy, Procedia Eng., 2017, 205, p 3705–3710.10.1016/j.proeng.2017.10.292 ↗

39. H.M. Fahmy, M. Ezzat, and A. Amr, Castor Oil/2,4-Toluene Di-Isocyanate/Polyethylene Glycol Adducts for Cotton Fabric Functionalization, Egypt. J. Chem., 2025, 68(4), p 53–62.

40. H.M. Fahmy and A. Amr, Synthesis of Castor Oil/PEG as Textile Softener, Sci. Rep., 2024, 14(1), p 1–15.10.1038/s41598-024-56917-2 ↗

41. M.I. Fitranda, Sutrisno, and S. Marfu’ah, Physicochemical Properties and Antibacterial Activity of Castor Oil and Its Derivatives, IOP Conf. Ser. Mater. Sci. Eng. 2020, 833(1).10.1088/1757-899X/833/1/012009 ↗

42. N. Sukhawipat, N. Saetung, and A. Saetung, Synthesis of Novel Cationic Waterborne Polyurethane from Natural Rubber and Its Properties Testing, Key Eng. Mater., 2016, 705, p 19–23.10.4028/www.scientific.net/KEM.705.19 ↗

43. N. Sukhawipat, N. Saetung, J.F. Pilard, S. Bistac, and A. Saetung, Synthesis and Characterization of Novel Natural Rubber Based Cationic Waterborne Polyurethane: Effect of Emulsifier and Diol Class Chain Extender, J. Appl. Polym. Sci., 2018, 135(3), p 17–19.10.1002/app.45715 ↗

44. I. Łukaszewska, A. Bukowczan, K.N. Raftopoulos, and K. Pielichowski, ‘Spider-like’ POSS in NIPU Webs: Enhanced Thermal Stability and Unique Swelling Behavior, J. Polym. Res., 2023, 30(12), p 456.10.1007/s10965-023-03834-z ↗

45. J. Seithümmer, P. Knospe, R. Reichmann, J.S. Gutmann, K. Hoffmann-Jacobsen, and M. Dornbusch, Comparison of 5- and 6-Membered Cyclic Carbonate-Polyisocyanate Adducts for High Performance Coatings, J. Coatings Technol. Res., 2023, 20(1), p 173–186.10.1007/s11998-022-00665-3 ↗

46. T. Sepperer and F. Salzburg, Purification of Industrial Tannin Extract to Produce Enhanced Tannin-Furanic Foams, 2018.

47. P. Benjak, L. Radetić, I. Presečki, I. Brnardić, N. Sakač, and I. Grčić, Microplastic-Related Leachate from Recycled Rubber Tiles: The Role of TiO2 Protective Coating, Surfaces, 2024, 7(3), p 786–800.10.3390/surfaces7030051 ↗

48. J. Reignier, F. Méchin, and A. Sarbu, Chemical Gradients in PIR Foams as Probed by ATR-FTIR Analysis and Consequences on Fire Resistance, Polym. Test., 2021. https://doi.org/10.1016/j.polymertesting.2020.10697210.1016/j.polymertesting.2020.106972 ↗

49. K.B. Adhikary, S. Pang, and M.P. Staiger, Long-Term Moisture Absorption and Thickness Swelling Behaviour of Recycled Thermoplastics Reinforced with Pinus radiata sawdust, Chem. Eng. J., 2008, 142(2), p 190–198.10.1016/j.cej.2007.11.024 ↗

50. J. Fiorelli, S.B. Bueno, and M.R. Cabral, Assessment of Multilayer Particleboards Produced with Green Coconut and Sugarcane Bagasse Fibers, Constr. Build. Mater., 2019, 205, p 1–9.10.1016/j.conbuildmat.2019.02.024 ↗

51. M.M. Ramezanpoor Maraghi, A. Tabei, and M. Madanipoor, Effect of Board Density, Resin Percentage and Pressing Temprature on Particleboard Properties Made from Mixing of Poplar Wood Slab, Citrus Branches and Twigs of Beech, Wood Research, 2018, 63, p 669–682.

52. I. Standard, Particleboards—Specifications, 2010.

53. J.T. Benthien and M. Ohlmeyer, Influence of Face-to-Core Layer Ratio and Core Layer Resin Content on the Properties of Density-Decreased Particleboards, Eur. J. Wood Wood Prod., 2017. https://doi.org/10.1007/s00107-016-1059-510.1007/s00107-016-1059-5 ↗

54. V. Savov, Influence of Pulp Freeness on Hardwood Fiberboards Properties, Ann. Fac. Eng. Hunedoara J. Eng., 2008, VI(Fascicule 3), p 65–72.

55. J. Fiorelli, D.D. Curtolo, N.G. Barrero, H. Savastano, E.M. de Jesus Agnolon Pallone, and R. Johnson, Particulate Composite Based on Coconut Fiber and Castor Oil Polyurethane Adhesive: An Eco-Efficient Product, Ind. Crops Prod., 2012, 40(1), p 69–75.10.1016/j.indcrop.2012.02.033 ↗

56. E.D. Wong, M. Zhang, Q. Wang, and S. Kawai, Formation of the Density Profile and Its Effects on the Properties of Particleboard, Wood Sci. Technol., 1999, 33(4), p 327–340.10.1007/s002260050119 ↗

57. J. Jin, C. Dai, W.E. Hsu, and C. Yu, Properties of Strand Boards with Uniform and Conventional Vertical Density Profiles, Wood Sci. Technol., 2009, 43(7–8), p 559–574.10.1007/s00226-009-0248-3 ↗

58. S. Jafarnezhad, A. Shalbafan, and J. Luedtke, Effect of Surface Layers Compressibility and Face-to-Core-Layer Ratio on the Properties of Lightweight Hybrid Panels, Int. Wood Prod. J., 2018, 9(4), p 164–170.10.1080/20426445.2018.1546979 ↗

59. C.D. Bauch and W.O. Olsen, The Effect of 2000-4000 Hz Hearing Sensitivity on ABR Results, Ear Hear., 1986. https://doi.org/10.1097/00003446-198610000-0000410.1097/00003446-198610000-00004 ↗

60. J. Strobel, E. Wigley, N. Evans, and W. Hung, BUZZ - Acoustical Engineering Methodologies to Measure Student Engagement, 2009 Res. Eng. Educ. Symp. REES 2009, 2009, p 1–6.

61. M. Zakriya, G. Ramakrishnan, N. Gobi, N.K. Palaniswamy, and J. Srinivasan, Jute-Reinforced Non-woven Composites as a Thermal Insulator and Sound Absorber—A Review, J. Reinf. Plast. Compos., 2016, 36(3), p 206–213.10.1177/0731684416679745 ↗

62. T. Yang, L. Hu, X. Xiong, M. Petrů, M.T. Noman, R. Mishra, and J. Militký, Sound Absorption Properties of Natural Fibers: A Review, Sustain., 2020, 12(20), p 1–25.

63. J. Tengsuthiwat, S. Limrungruengrat, and N. Sukhawipat, A Green Dual Function Engineering Material—Sound Absorption and Heat Insulation Based on Water Hyacinth Fiber and Waste Palm Oil, Fibers Polym., 2023. https://doi.org/10.1007/s12221-023-00304-710.1007/s12221-023-00304-7 ↗

64. P. Rebolledo, A. Cloutier, and M.C. Yemele, Effect of Density and Fiber Size on Porosity and Thermal Conductivity of Fiberboard Mats, Fibers, 2018, 6(4), p 1–17.10.3390/fib6040081 ↗

65. K. Mariselvam and J. Liu, Concentration Effect of Tm3+ Ions Doped B2O3-Li2CO3-BaCO3-CaF2-ZnO Glasses: Blue Laser and Radiation Shielding Investigations, Opt. Laser Technol., 2022. https://doi.org/10.1016/j.optlastec.2022.10826210.1016/j.optlastec.2022.108262 ↗

66. W.M. Al-Saleh, M. Elsafi, H.M. Almutairi, I.M. Nabil, and M.A. El-Nahal, A Comprehensive Study of the Shielding Ability from Ionizing Radiation of Different Mortars Using Iron Filings and Bismuth Oxide, Sci. Rep., 2024. https://doi.org/10.1038/s41598-024-60188-210.1038/s41598-024-60188-2 ↗

67. A. Abd, G. Mesbah, N. Mohamed, and A. Ellithi, A Simple Method for Determining the Effective Removal Cross Section for Fast Neutrons, J. Radiat. Nucl. Appl., 2017, 2, p 53–58.10.18576/jrna/020203 ↗

68. R.B. Firestone and Z. Revay, Thermal Neutron Capture Cross Sections for O 16,17,18 and H 2, Phys. Rev. C, 2016, 93(4), p 1–7.10.1103/PhysRevC.93.044311 ↗

69. A.M. Madbouly and A. A. El-Sawy, Calculation of Gamma and Neutron Parameters for Some Concrete Materials as Radiation Shields for Nuclear Facilities, International Journal of Emerging Trends in Engineering and Development, 2018, 3(8), p 7–17.https://doi.org/10.26808/rs.ed.i8v4.0210.26808/rs.ed.i8v4.02 ↗

70. D. Toyen and K. Saenboonruang, Development of Paraffin and Paraffin/Bitumen Composites with Additions of B2O3 for Thermal Neutron Shielding Applications, J. Nucl. Sci. Technol., 2017, 54(8), p 871–877.10.1080/00223131.2017.1323688 ↗

71. W. Zhang, Y. Feng, J.T. Althakafy, Y. Liu, H.M. Abo-Dief, M. Huang, L. Zhou, F. Su, C. Liu, and C. Shen, Ultrahigh Molecular Weight Polyethylene Fiber/Boron Nitride Composites with High Neutron Shielding Efficiency and Mechanical Performance, Adv. Compos. Hybrid Mater., 2022, 5(3), p 2012–2020.10.1007/s42114-022-00539-7 ↗

72. T. Özdemir, A. Güngör, and A. Reyhancan, Flexible Neutron Shielding Composite Material of EPDM Rubber with Boron Trioxide: Mechanical, Thermal Investigations and Neutron Shielding Tests, Radiat. Phys. Chem., 2017. https://doi.org/10.1016/j.radphyschem.2016.10.01210.1016/j.radphyschem.2016.10.012 ↗

73. B. Chang, S. Li, M. Li, and R. Chen, Research Progress of Neutron Shielding Materials. In: International Conference on Nuclear Engineering, vol. 86366 (American Society of Mechanical Engineers, 2022), p. V002T02A050. https://doi.org/10.1115/ICONE29-9221010.1115/ICONE29-92210 ↗

74. M.N. Nasrabadi and G. Baghban, Neutron Shielding Design for 241Am–Be Neutron Source Considering Different Sites to Achieve Maximum Thermal and Fast Neutron Flux Using MCNPX Code, Ann. Nucl. Energy, 2013, 59, p 47–52.10.1016/j.anucene.2013.03.030 ↗

75. M.B. Paul, A.D. Ankan, H. Deb, and M.M. Ahasan, A Monte Carlo Simulation Model to Determine the Effective Concrete Materials for Fast Neutron Shielding, Radiat. Phys. Chem., 2023, 202, 110476.10.1016/j.radphyschem.2022.110476 ↗

76. K. Ninyong, E. Wimolmala, N. Sombatsompop, and K. Saenboonruang, Potential Use of NR and Wood/NR Composites as Thermal Neutron Shielding Materials, Polym. Test., 2017, 59, p 336–343.10.1016/j.polymertesting.2017.02.020 ↗

77. E. Mansouri, A. Mesbahi, R. Malekzadeh, A. Ghasemi Janghjoo, and M. Okutan, A Review on Neutron Shielding Performance of Nanocomposite Materials, Int. J. Radiat. Res., 2020, 18(4), p 611–622.10.52547/ijrr.18.4.611 ↗

78. S.T. Abdulrahman, Z. Ahmad, S. Thomas, and A.A. Rahman, Introduction to Neutron-Shielding Materials, In: Micro and Nanostructured Composite Materials for Neutron Shielding Applications (Woodhead Publishing, 2020) p 1–23. https://doi.org/10.1016/B978-0-12-819459-1.00001-510.1016/B978-0-12-819459-1.00001-5 ↗